QUESTIONS AND ANSWERS
◉ 3 months.
Answer: Formal inspection and maintenance of radiographic
exposure devices and associated equipment must be performed
every:
a. 1 month
b. 3 months
c. 6 months
d. 12 months
◉ 2 mR/hr, 100 mR/yr.
Answer: The "Restricted Area" boundary is established where the
exposure could exceed:
a. 5 mR/hr, 500 mR/yr
b. 2 mR/hr, 100 mR/yr
c. 2 mR/hr, 100 mR in 7 consecutive days, 500 mR/hr
d. 100 mR/yr
◉ 100 mR/hr.
, Answer: The "High Radiation Area" boundary is established where
the exposure could exceed:
a. 500 mR/hr
b. 100 mR/hr
c. 5 mR/hr
d. 2 mR/hr
◉ C.
Answer: After terminating a radiographic exposure, radiographers
are required to perform a survey of:
(Answer with A, B, C, or D)
a. The specimen that was being radiographed
b. The "Restricted Area" boundary
c. The exposure device, entire length of source guide tube and
collimator if used
d. The exposure device
◉ 300 mR/hr.
Answer: A survey meter dial reads 1-10 with units of mR/hr and has
three scales; x1, x10 and x100. What is the measured radiation
intensity when the needle is on the 3 and the scale is x100?
a. 3 mR/hr
b. 30 mR/hr