COMPLETE QUESTIONS AND CORRECT DETAILED
ANSWERS (VERIFIED ANSWERS) ALREADY GRADED A+ /
TCFP PREP EXAM | GUARANTEED PASS
What does the abbreviation TLV stand for?
A. Type limit variable
B. Total limit viability
C. Time length variable
D. Threshold limit value -✔✔✔ Correct Answer> D. Threshold limit value
A definition of moisture in concrete is heated to steam and
expands causing parts of the concrete to break away
A. Delamination
B. Depolymerization
C. Spalling
D. Stressing - ✔✔✔ Correct Answer> c. Spalling
,Which threshold limit value is the maximum concentration at which
exposure should not exceed 15 minutes and should not be repeated
more than four times per day?
A. Time-weighted average
B. Immediately dangerous to life and health (IDLH)
C. Short-term exposure limit
D. Permissible exposure limit -✔✔✔ Correct Answer> C. Short-term exposure
limit
Which value is the maximum concentration to which an adult can be
exposed 8 hours per day, 40 hours per week?
A. Time-weighted average
B. Long-term exposure limit
C. Working exposure limit
D. Ceiling level -✔✔✔ Correct Answer> A. Time-weighted average
The process of comparing the positive results that can be achieved in an
action with the probability and severity of potential negative
consequences is called?
A. Quid pro quo
,B. Risk-benefit analysis
C. Validated needs assessment
D. Job task analysis -✔✔✔ Correct Answer> b. Risk-benefit analysis
is an atmospheric concentration of any substance
that poses an immediate threat to life.
A. Ceiling level
B. Immediately Dangerous to Life and Health (IDLH)
C. Short-term exposure limit
D. Maximum exposure limit - ✔✔✔ Correct Answer> B. Immediately
Dangerous to Life and Health (IDLH)
Which Threshold Limit Value sets a maximum concentration above
which no exposure of any duration should be permitted?
A. Ceiling
B. Maximum exposure limit
C. Short-term exposure limit
D. Permissible exposure limit -✔✔✔ Correct Answer> A. Ceiling
, In the yellow and blue-bordered sections of the ERG, how are materials
that are included in the Table of Initial Isolation and Protective
Distances identified?
A. They are in bold print.
B. They are italicized.
C. They are highlighted.
D. They are underlined - ✔✔✔ Correct Answer> C. They are highlighted.
Materials are listed in the green section of the ERG because of their:
A. Flammability or explosion hazard.
B. Toxicity.
C. Reactivity.
D. Instability. -✔✔✔ Correct Answer> B. Toxicity.
In the ERG, the Initial Isolation and Protective Action Distances are
found on pages that have borders.
A. Red
B. Yellow
C. Blue