VERIFIED AND WELL DETAILED ANSWERS | PLUS RATIONALES | GUARANTEED PASS |
LATEST EXAM UPDATE
CORE DOMAINS*
• Asbestos Identification and Classification*
• Regulatory Compliance and Legal Requirements*
• Asbestos Management Planning*
• Risk Assessment and Exposure Control*
• Air Monitoring and Sampling Procedures*
• Abatement Methods and Project Oversight*
, • Occupational Health and Safety*
• Hazard Communication and Documentation*
• Waste Handling and Disposal*
• Ethics and Professional Responsibility*
INTRODUCTION*
The 11 PA Asbestos Management Planner Exam evaluates the
SECTION ONE: QUESTIONS 1–50
1. Which federal agency is primarily responsible for regulating workplace asbestos
exposure standards in the United States?
A. EPA
B. OSHA
C. CDC
D. FEMA
,🟢 Correct Answer: B. OSHA
🔴 Explanation: OSHA establishes and enforces workplace exposure standards for
asbestos to protect employees from occupational hazards.
2. What is the primary purpose of an asbestos management plan?
A. To increase property value
B. To eliminate all construction materials
C. To manage asbestos-containing materials safely
D. To avoid building inspections
🟢 Correct Answer: C. To manage asbestos-containing materials safely
🔴 Explanation: An asbestos management plan outlines procedures for identifying,
monitoring, and safely managing asbestos-containing materials.
3. Friable asbestos is best described as material that:
A. Cannot release fibers under any condition
B. Contains less than 1% asbestos
C. Is permanently sealed in concrete
D. Can be crumbled by hand pressure
🟢 Correct Answer: D. Can be crumbled by hand pressure
, 🔴 Explanation: Friable asbestos can easily release hazardous fibers when disturbed,
increasing exposure risk.
4. Which document typically records the location and condition of asbestos-containing
materials in a building?
A. Emergency evacuation plan
B. Asbestos survey report
C. Architectural blueprint
D. Employee handbook
🟢 Correct Answer: B. Asbestos survey report
🔴 Explanation: An asbestos survey report identifies asbestos-containing materials and
documents their condition and location.
5. What is the permissible exposure limit (PEL) for asbestos under OSHA standards?
A. 1.0 fibers/cc
B. 0.5 fibers/cc
C. 0.1 fibers/cc
D. 5.0 fibers/cc
🟢 Correct Answer: C. 0.1 fibers/cc