OSHA THIRTY CONSTRUCTION FALL
PROTECTION TEST SOLUTIONS
CLICKSAFETY REDVECTOR 2026
FLASHCARD SET GRADED A+
⩥ Workers should not work in an unprotected trench that is 5 feet deep
or more. The type of protection installed may be sloping or benching,
trench box or shield and ____________. Answer: Shoring
⩥ To prevent being pinned between equipment or other objects, workers
should avoid ________. Answer: Placing themselves between moving
vehicles and an immovable structure, vehicle, or stacked materials.
⩥ Workers should wear a ________ if required, to avoid being thrown
from a vehicle and crushed as the vehicle tips over. Answer: Seatbelt
⩥ Make sure all loads carried by equipment are stable and _____.
Answer: Secured
⩥ All hand-held power tools should have guards and _____ on them.
Answer: Safety switches
,⩥ Which procedure helps to ensure equipment doesn't accidentally
reenergize when it's being repaired or worked on? Answer:
Lockout/Tagout
⩥ The first choice for how to reduce or eliminate a hazard is: Answer:
Engineering controls
⩥ _____ can be caused by repetitive motions or repeated shocks over
prolonged periods of time. Answer: Carpel tunnel syndrome
⩥ One of the benefits of a well-designed ergonomic work environment
is low operating costs. Answer: True
⩥ An industrial hygienist identifies exposures, problems, tasks and risks
of the workplace by performing a(n): Answer: Worksite analysis
⩥ Lead exposure can cause all of the following except: Answer: Skin
Burns
⩥ The common drinking cup is _____ in the working place. Answer:
Prohibited
⩥ In occupations where there is exposure to ionizing radiation, time,
distance and _____ are important in considering worker safety. Answer:
Shielding
, ⩥ What type of correctional program is used to plan the best way to
control or prevent hazards in the event of an emergency? Answer:
Emergency preparation
⩥ These types of contaminants can be result from welding, cleaning or
painting: Answer: Gas or Vapor
⩥ The basic worksite analysis performed by an industrial hygienist
includes: Answer: All of the above
⩥ A wire rope sling with a strength of 10,000 pounds and a total
working load of 2,000 pounds has a design factor (multiplier) of ___.
Answer: 5
⩥ When disposal materials are dropped more than 20 feet to an exterior
location, an enclosed chute must be used. Answer: True
⩥ When using industrial fork-lifts, the load must be at the lowest
position for traveling, and the truck manufacturer's operational
requirements must be followed. Answer: True
⩥ Maximum safe load limits of _____ must be posted within buildings
and structures. Answer: Floors
PROTECTION TEST SOLUTIONS
CLICKSAFETY REDVECTOR 2026
FLASHCARD SET GRADED A+
⩥ Workers should not work in an unprotected trench that is 5 feet deep
or more. The type of protection installed may be sloping or benching,
trench box or shield and ____________. Answer: Shoring
⩥ To prevent being pinned between equipment or other objects, workers
should avoid ________. Answer: Placing themselves between moving
vehicles and an immovable structure, vehicle, or stacked materials.
⩥ Workers should wear a ________ if required, to avoid being thrown
from a vehicle and crushed as the vehicle tips over. Answer: Seatbelt
⩥ Make sure all loads carried by equipment are stable and _____.
Answer: Secured
⩥ All hand-held power tools should have guards and _____ on them.
Answer: Safety switches
,⩥ Which procedure helps to ensure equipment doesn't accidentally
reenergize when it's being repaired or worked on? Answer:
Lockout/Tagout
⩥ The first choice for how to reduce or eliminate a hazard is: Answer:
Engineering controls
⩥ _____ can be caused by repetitive motions or repeated shocks over
prolonged periods of time. Answer: Carpel tunnel syndrome
⩥ One of the benefits of a well-designed ergonomic work environment
is low operating costs. Answer: True
⩥ An industrial hygienist identifies exposures, problems, tasks and risks
of the workplace by performing a(n): Answer: Worksite analysis
⩥ Lead exposure can cause all of the following except: Answer: Skin
Burns
⩥ The common drinking cup is _____ in the working place. Answer:
Prohibited
⩥ In occupations where there is exposure to ionizing radiation, time,
distance and _____ are important in considering worker safety. Answer:
Shielding
, ⩥ What type of correctional program is used to plan the best way to
control or prevent hazards in the event of an emergency? Answer:
Emergency preparation
⩥ These types of contaminants can be result from welding, cleaning or
painting: Answer: Gas or Vapor
⩥ The basic worksite analysis performed by an industrial hygienist
includes: Answer: All of the above
⩥ A wire rope sling with a strength of 10,000 pounds and a total
working load of 2,000 pounds has a design factor (multiplier) of ___.
Answer: 5
⩥ When disposal materials are dropped more than 20 feet to an exterior
location, an enclosed chute must be used. Answer: True
⩥ When using industrial fork-lifts, the load must be at the lowest
position for traveling, and the truck manufacturer's operational
requirements must be followed. Answer: True
⩥ Maximum safe load limits of _____ must be posted within buildings
and structures. Answer: Floors
