NICET Level 2 NFPA 25: Exam 2026|2027 Advanced Practice Questions with Complete
A+ Solutions 100% Correct!!! (Standard for Inspection, Testing, and Maintenance of
Water-Based Fire Protection Systems)
All pressure reducing valves installed on fire protection systems to be inspection ___?? - Correct Answer
-13.5.1.1.
Any obstructions present in an FDC shall be ______? - Correct Answer -13.8.4
Whenever a fire pump is in operation, _______ shall be in attendance. - Correct Answer -8.3.2.7
Per NFPA25, what are 3 examples of a harsh environment? - Correct Answer -A.5.3.1.1.2
How often shall valves on the water supply line of a water spray fixed system to be inspected to verify
they are open? - Correct Answer -10.4.4.1
How often shall silt be removed from a water storage tank to avoid accumulation to the level of the tank
outlet? - Correct Answer -9.4.5
1|Page
, How often is the exterior of an automatic tank fill valve to be inspected? - Correct Answer -9.5.1.1
If I have redundant fire pumps, what is the no-flow test frequency? - Correct Answer -8.3.1.2.3
What is the minimum flow time when testing a hydrant? - Correct Answer -7.3.2.2
How often shall diesel fuel be tested for degradation? - Correct Answer -8.3.4.1
If water damage is a possibility, what step should you take before introducing water to a manual
standpipe system? - Correct Answer -6.3
How often can you test a fire pump utilizing closed loop metering? - Correct Answer -8.3.3.6
What does MIC stand for - Correct Answer -Microbiologically Influenced Corrosion (Annex D)
What is something you would inspect on a bladder tank proportioner? - Correct Answer -(11.2.8.5.2.2)
2|Page
A+ Solutions 100% Correct!!! (Standard for Inspection, Testing, and Maintenance of
Water-Based Fire Protection Systems)
All pressure reducing valves installed on fire protection systems to be inspection ___?? - Correct Answer
-13.5.1.1.
Any obstructions present in an FDC shall be ______? - Correct Answer -13.8.4
Whenever a fire pump is in operation, _______ shall be in attendance. - Correct Answer -8.3.2.7
Per NFPA25, what are 3 examples of a harsh environment? - Correct Answer -A.5.3.1.1.2
How often shall valves on the water supply line of a water spray fixed system to be inspected to verify
they are open? - Correct Answer -10.4.4.1
How often shall silt be removed from a water storage tank to avoid accumulation to the level of the tank
outlet? - Correct Answer -9.4.5
1|Page
, How often is the exterior of an automatic tank fill valve to be inspected? - Correct Answer -9.5.1.1
If I have redundant fire pumps, what is the no-flow test frequency? - Correct Answer -8.3.1.2.3
What is the minimum flow time when testing a hydrant? - Correct Answer -7.3.2.2
How often shall diesel fuel be tested for degradation? - Correct Answer -8.3.4.1
If water damage is a possibility, what step should you take before introducing water to a manual
standpipe system? - Correct Answer -6.3
How often can you test a fire pump utilizing closed loop metering? - Correct Answer -8.3.3.6
What does MIC stand for - Correct Answer -Microbiologically Influenced Corrosion (Annex D)
What is something you would inspect on a bladder tank proportioner? - Correct Answer -(11.2.8.5.2.2)
2|Page
