CERTIFIED PLAYGROUND SAFETY INSPECTOR CSPI ACTUAL EXAM PREPARATION NEWEST COMPLETE QUESTIONS AND CORRECT DETAILED CORRECT ANSWERS FULLY VERIFIED BRANDNEW VERSION HIGH YIELD STUDY GUIDE ACTUAL UPDATED PRACTICE QUESTIONS CERTIFICATION EXAM PREPARA

1 | Page




CERTIFIED PLAYGROUND SAFETY INSPECTOR CSPI
ACTUAL EXAM PREPARATION NEWEST 2026 2027
COMPLETE QUESTIONS AND CORRECT DETAILED
CORRECT ANSWERS FULLY VERIFIED BRANDNEW
VERSION HIGH YIELD STUDY GUIDE ACTUAL
UPDATED PRACTICE QUESTIONS CERTIFICATION
EXAM PREPARATION GRADED A+ SUCCESS REVIEW


Designated Playing Surface-minimum width and length <30 degrees
from horizontal? - CORRECT ANSWER-2 inches or 51mm



Force requirements for Non-Rigid openings (applied to head or torso
probes)? - CORRECT ANSWER-50lbf or 222 N



Non-Rigid Component Suspended Between Two Play Units or Between
Play Unit and Ground Within 45 degrees of Horizontal- minimum
height? - CORRECT ANSWER-84" or 2130 mm




Non-Rigid Component Suspended Between Two Play Units or Between
Play Unit and Ground Within 45 degrees of Horizontal - minimum
diameter? - CORRECT ANSWER-1" or 25.4 mm

,2 | Page




Crush and Shear Probe- for common hazards neoprene rod diameter? -
CORRECT ANSWER-0.62" or 15.7 mm

Ground-Level Flexible Manipulative Components- maximum connector
length ? - CORRECT ANSWER-24" or 609 mm



Ground-Level Flexible Manipulative Play Components- max.
attachment height? - CORRECT ANSWER-27" or 686 mm



Head Probe - diameter? - CORRECT ANSWER-9" or 229 mm



Small Projection Gauge - height? - CORRECT ANSWER-0.25" or 6.4
mm



Small Projection Gauge-inside diameter? - CORRECT ANSWER-0.50"
or 12.7 mm



Small Projection Gauge- outside diameter? - CORRECT ANSWER-1"
or 25.4 mm



Middle Projection Gauge- height? - CORRECT ANSWER-0.75" or
19.1 mm

,3 | Page




Middle Projection Gauge - inside diameter? - CORRECT ANSWER-
1.50" or 38.1 mm



Middle Projection Gauge- outside diameter? - CORRECT ANSWER-2"
or 50.8 mm Large Projection Gauge- height ? - CORRECT ANSWER-
1.5" or 38.1 mm



Large Projection Gauge- inside diameter? - CORRECT ANSWER-3" or
76.2 mm



Large Projection Gauge- outside diameter? - CORRECT ANSWER-3.5"
or 88.9 mm



Partially-Bounded Opening Probe- neck length? - CORRECT
ANSWER-3" or 76 mm



Partially-Bounded Opening Probe- neck width? - CORRECT
ANSWER-1.875" or
47.6 mm

, 4 | Page




Partially-Bounded Opening Probe (A) -width? - CORRECT ANSWER-
6.1" or 155 mm



Partially-Bounded Opening Probe (B) - shoulder width? - CORRECT
ANSWER-9" or 229 mm




Partially-Bounded Opening Probe (B)- thickness? - CORRECT
ANSWER-0.75" or
19.1 mm

Rope, Cable, or Chain Attached at One End - maximum length
allowable? - CORRECT ANSWER-7" or 178 mm



S-Hook - maximum opening? - CORRECT ANSWER-0.04" or 1 mm



Slide Non-Entanglement/ Clearance Zone - minimum side clearance? -
CORRECT ANSWER-21" or 530 mm



Suspended Members/ Swing Sets - minimum radius? - CORRECT
ANSWER-0.25" or 6.4 mm