Post Installed Adhesive Anchor Certification
Exam Questions With Correct Answers
An adhesive anchor system is made up of an: - ANSWER✔✔✔-adhesive, anchor,
| | | | | | | | | | | |
drilling equipment, cleaning equipment, installation equipment, MPII, and MSDS
| | | | | | | |
An anchor connection includes an attachment, an anchor, and the substrate (T/F)
| | | | | | | | | | |
- ANSWER✔✔✔-True
| |
Adhesive anchors are cast in concrete before the concrete hardens (T/F) -
| | | | | | | | | | | |
ANSWER✔✔✔-False
What piece of equipment has a static mixing element? - ANSWER✔✔✔-Mixing
| | | | | | | | | | |
nozzle
Adhesive anchor failure in tension does NOT occur by: - ANSWER✔✔✔-Concrete
| | | | | | | | | | |
pryout failure |
Adhesive anchor failure modes in shear include: - ANSWER✔✔✔-Concrete pryout
| | | | | | | | |
failure, steel failure, and concrete breakout failure
| | | | | | |
Installation factors that influence the strength of the adhesive anchor bond
| | | | | | | | | | |
include: - ANSWER✔✔✔-Drilling the hole, cleaning the hole, and injecting the
| | | | | | | | | | |
adhesive according to the MPII
| | | |
, Adhesives should be stored: - ANSWER✔✔✔-As directed by the MPII
| | | | | | | | |
Gel time is: - ANSWER✔✔✔-The amount of time between first mixing and when
| | | | | | | | | | | | |
it becomes non-flowing, increased when temps decrease, and decrease when
| | | | | | | | | |
temps increase
|
Proper installation of adhesive anchor systems is important to ensure that the
| | | | | | | | | | | |
system achieves its maximum performance to prevent anchor failures (T/F) -
| | | | | | | | | | |
ANSWER✔✔✔-True
ACI (?), Appendix D requires that installation of adhesive anchors horiz. or
| | | | | | | | | | | |
overhead that support sustained tension loads are performed by certified
| | | | | | | | | |
personnel - ANSWER✔✔✔-318 | |
A post installed anchor is: - ANSWER✔✔✔-installed in an existing concrete
| | | | | | | | | | |
member
A tension load is (?) to the axis of the installed anchor - ANSWER✔✔✔-Parallel
| | | | | | | | | | | | |
An adhesive anchor may fail if the applied load exceeds the strength of the bond
| | | | | | | | | | | | | | |
between the adhesive and the concrete or the bond between the adhesive and
| | | | | | | | | | | | |
the anchor (T/F) - ANSWER✔✔✔-True
| | | |
An anchor can also be called: - ANSWER✔✔✔-anchor element, anchor rod,
| | | | | | | | | | |
threaded rod, and anchoring element
| | | |
Exam Questions With Correct Answers
An adhesive anchor system is made up of an: - ANSWER✔✔✔-adhesive, anchor,
| | | | | | | | | | | |
drilling equipment, cleaning equipment, installation equipment, MPII, and MSDS
| | | | | | | |
An anchor connection includes an attachment, an anchor, and the substrate (T/F)
| | | | | | | | | | |
- ANSWER✔✔✔-True
| |
Adhesive anchors are cast in concrete before the concrete hardens (T/F) -
| | | | | | | | | | | |
ANSWER✔✔✔-False
What piece of equipment has a static mixing element? - ANSWER✔✔✔-Mixing
| | | | | | | | | | |
nozzle
Adhesive anchor failure in tension does NOT occur by: - ANSWER✔✔✔-Concrete
| | | | | | | | | | |
pryout failure |
Adhesive anchor failure modes in shear include: - ANSWER✔✔✔-Concrete pryout
| | | | | | | | |
failure, steel failure, and concrete breakout failure
| | | | | | |
Installation factors that influence the strength of the adhesive anchor bond
| | | | | | | | | | |
include: - ANSWER✔✔✔-Drilling the hole, cleaning the hole, and injecting the
| | | | | | | | | | |
adhesive according to the MPII
| | | |
, Adhesives should be stored: - ANSWER✔✔✔-As directed by the MPII
| | | | | | | | |
Gel time is: - ANSWER✔✔✔-The amount of time between first mixing and when
| | | | | | | | | | | | |
it becomes non-flowing, increased when temps decrease, and decrease when
| | | | | | | | | |
temps increase
|
Proper installation of adhesive anchor systems is important to ensure that the
| | | | | | | | | | | |
system achieves its maximum performance to prevent anchor failures (T/F) -
| | | | | | | | | | |
ANSWER✔✔✔-True
ACI (?), Appendix D requires that installation of adhesive anchors horiz. or
| | | | | | | | | | | |
overhead that support sustained tension loads are performed by certified
| | | | | | | | | |
personnel - ANSWER✔✔✔-318 | |
A post installed anchor is: - ANSWER✔✔✔-installed in an existing concrete
| | | | | | | | | | |
member
A tension load is (?) to the axis of the installed anchor - ANSWER✔✔✔-Parallel
| | | | | | | | | | | | |
An adhesive anchor may fail if the applied load exceeds the strength of the bond
| | | | | | | | | | | | | | |
between the adhesive and the concrete or the bond between the adhesive and
| | | | | | | | | | | | |
the anchor (T/F) - ANSWER✔✔✔-True
| | | |
An anchor can also be called: - ANSWER✔✔✔-anchor element, anchor rod,
| | | | | | | | | | |
threaded rod, and anchoring element
| | | |
