1|Page
CSA W47.1 Final Verified Exam Questions And
Answers Practice Questions with Solutions Newest |
Already Graded A+||Newest Exam!!!
Does CSA Standard W47.1 specify the requirements for a
company seeking certification? - Answer-Yes (Cl. 1.1) This
standard provides the requirements for the certification of
companies engaged in the fusion welding of steel and the
qualification of their personnel and welding procedures.
Who is responsible for the welded products a company
produces? - Answer-The Company (Cl. 1.2) The
requirements of this standard are based on the principle
that a certified company has full responsibility for the
quality of the welded product it produces and this
responsibility cannot be transfered to its employed or
retained personnel or to the administrator of this standard.
Does this standard approve the products and services of a
certified company? - Answer-No (Cl. 1.3) This standard
governs the certification of companies. Certification
pertains to the capability of the company with respect to
welding. Certification should not be construed as
approving any products or services of the certified
company.
,2|Page
What requirements are stipulated in CSA Standard
W47.1? - Answer-(Cl. 1.4) This standard stipulates
requirements for:
a. Welding engineers
b. Welding supervisors
c. Tack welders, welders, and welding operators, and
d. Documentation.
What Standard or code reference publications are referred
to in CSA Standard W47.1 ? - Answer-This Standard
refers to the publications listed in Clause 2.
What is the definition of class? - Answer-(Cl. 3) Class - A
category of welder qualification, e.g., the flat (F), horizontal
(H), vertical (V), or overhead (O) welding positions.
What are the welding classifications specified in CSA
standard W47.1? - Answer-(Cl. 3) Classification - T,S,FW,
or WT welding personnel as follows:
a. "T" refers to a welder's and welding operator's ability to
weld from one side without backing and achieve complete
,3|Page
penetration in the root pass, e.g., hollow section, pipe, and
plate.
b. "S" refers to a welder's and welding operator's ability to
weld plates and rolled or hollow sections for the full
thickness of material, when welding from both sides
without backgouging, withing the thickness limitations of
the accepted welding procedure data sheets for the
process used.
c. "FW" refers to a welder's and welding operator's ability
to deposit fillet and tack welds.
d. "WT" refers to a welder's and welding operator's ability
to deposit tack welds.
What is a Welding Procedure Data Sheet (WPDS)? -
Answer-(Cl. 3)Welding Procedure Data Sheet (WPDS): A
document, used in conjunction with a WPS, detailing the
welding parameters and ranges for welding a specific joint,
over a range of thicknesses and weld sizes, as illustrated
on the DATA Sheet.
What is the definition of a welding supervisor? - Answer-
(Cl. 3) Welding supervisor: The company's designated
person(s) directly responsible for ensuring that qualified
tack welders, welders, welding operators, robotic welding
, 4|Page
programmer, and robotic welding operator weld in
accordance with approved or accepted welding procedure
data sheets in the shop and the field.
Who administers CSA Standard W47.1? - Answer-(Cl. 4.1)
This standard shall be administered by the CWB.
For how long does a company's certification remain in
effect? - Answer-(Cl. 4.5) Certification shall continue in
effect subject to periodic verification by the CWB that the
requirements of this standard are being met. Such
verifications shall take place at the location(s) where
welding is being performed by the company.
Can the Canadian Weld Bureau withdraw a company's
certification? - Answer-Yes. (Cl. 4.6) For a company that is
not meeting requirements of certification, the CWB shall
notify the individual identified in Clause 5.1.5 of the
specific requirements that are not being met. The
company shall demonstrate to the CWB within a
reasonable period of time that the non-compliances have
been resolved. In the event that a company does not
resolve the non-compliances set out in the initial
notification, the CWB shall notify the Chief Executive
Officer, or a person designated by the Chief Executive
CSA W47.1 Final Verified Exam Questions And
Answers Practice Questions with Solutions Newest |
Already Graded A+||Newest Exam!!!
Does CSA Standard W47.1 specify the requirements for a
company seeking certification? - Answer-Yes (Cl. 1.1) This
standard provides the requirements for the certification of
companies engaged in the fusion welding of steel and the
qualification of their personnel and welding procedures.
Who is responsible for the welded products a company
produces? - Answer-The Company (Cl. 1.2) The
requirements of this standard are based on the principle
that a certified company has full responsibility for the
quality of the welded product it produces and this
responsibility cannot be transfered to its employed or
retained personnel or to the administrator of this standard.
Does this standard approve the products and services of a
certified company? - Answer-No (Cl. 1.3) This standard
governs the certification of companies. Certification
pertains to the capability of the company with respect to
welding. Certification should not be construed as
approving any products or services of the certified
company.
,2|Page
What requirements are stipulated in CSA Standard
W47.1? - Answer-(Cl. 1.4) This standard stipulates
requirements for:
a. Welding engineers
b. Welding supervisors
c. Tack welders, welders, and welding operators, and
d. Documentation.
What Standard or code reference publications are referred
to in CSA Standard W47.1 ? - Answer-This Standard
refers to the publications listed in Clause 2.
What is the definition of class? - Answer-(Cl. 3) Class - A
category of welder qualification, e.g., the flat (F), horizontal
(H), vertical (V), or overhead (O) welding positions.
What are the welding classifications specified in CSA
standard W47.1? - Answer-(Cl. 3) Classification - T,S,FW,
or WT welding personnel as follows:
a. "T" refers to a welder's and welding operator's ability to
weld from one side without backing and achieve complete
,3|Page
penetration in the root pass, e.g., hollow section, pipe, and
plate.
b. "S" refers to a welder's and welding operator's ability to
weld plates and rolled or hollow sections for the full
thickness of material, when welding from both sides
without backgouging, withing the thickness limitations of
the accepted welding procedure data sheets for the
process used.
c. "FW" refers to a welder's and welding operator's ability
to deposit fillet and tack welds.
d. "WT" refers to a welder's and welding operator's ability
to deposit tack welds.
What is a Welding Procedure Data Sheet (WPDS)? -
Answer-(Cl. 3)Welding Procedure Data Sheet (WPDS): A
document, used in conjunction with a WPS, detailing the
welding parameters and ranges for welding a specific joint,
over a range of thicknesses and weld sizes, as illustrated
on the DATA Sheet.
What is the definition of a welding supervisor? - Answer-
(Cl. 3) Welding supervisor: The company's designated
person(s) directly responsible for ensuring that qualified
tack welders, welders, welding operators, robotic welding
, 4|Page
programmer, and robotic welding operator weld in
accordance with approved or accepted welding procedure
data sheets in the shop and the field.
Who administers CSA Standard W47.1? - Answer-(Cl. 4.1)
This standard shall be administered by the CWB.
For how long does a company's certification remain in
effect? - Answer-(Cl. 4.5) Certification shall continue in
effect subject to periodic verification by the CWB that the
requirements of this standard are being met. Such
verifications shall take place at the location(s) where
welding is being performed by the company.
Can the Canadian Weld Bureau withdraw a company's
certification? - Answer-Yes. (Cl. 4.6) For a company that is
not meeting requirements of certification, the CWB shall
notify the individual identified in Clause 5.1.5 of the
specific requirements that are not being met. The
company shall demonstrate to the CWB within a
reasonable period of time that the non-compliances have
been resolved. In the event that a company does not
resolve the non-compliances set out in the initial
notification, the CWB shall notify the Chief Executive
Officer, or a person designated by the Chief Executive
