CSA Standard W47.1-09 - CWB Welding Supervisor
Exam Newest 2026 Questions and Correct Detailed
Answers Already Graded A+
Does the CSA Standard W47.1 specify the requirements for a company seeking
certification? - CORRECT ANSWER-Yes, This standard provides the
requirements for the certification of companies engaged in the fusion welding of
steel and the qualification of their personnel and welding procedures (Cl 1.1)
What is a Welding Procedure Data Sheet (WPDS)? - CORRECT ANSWER-(Cl.3)
Welding Procedure Data Sheet (WPDS) - a document, used in conjunction with a
WPS, detailing the welding parameters and ranges for welding joint, over a range
of thicknesses and weld sizes, as illustrated on the data sheet
What are the responsibilities of a welding supervisor as defined in CSA Standard
W47.1? - CORRECT ANSWER-(Cl.3) Welding Supervisor - the company's
designated person(s) directly responsible for ensuring that qualified tack welders,
welders, and welding operators weld in accordance with approved or accepted
welding procedure data sheets in the shop and the field (Also see Cl 7.1)
,Who administers CSA Standard W47.1? - CORRECT ANSWER-(Cl. 4.1) This
standard shall be administered by the Canadian Welding Bureau.
For how long does a company's certification remain in effect? - CORRECT
ANSWER-(Cl.4.5) Certification shall continue in effect subject to periodic
verification by the Bureau that the requirements of the standard are being met.
Such verification's shall take place at the locations(s) where welding is being
performed by the company.
Can the Canadian Welding Bureau withdraw a company's certification? -
CORRECT ANSWER-Yes. (Cl. 4.6) For a company that is not meeting the
requirements of certification, the Canadian Welding Bureau shall notify the
individual identified in Clause 5.1.5 of the specific requirements that are not being
met. The company shall demonstrate to the Canadian Welding Bureau within a
reasonable period of time that the non compliance's have been resolved. In event
that a company does not resolve the non compliance's set out in the initial
notification, the Canadian Welding Bureau shall notify the Chief Executive Officer,
or a person designated by the Chief Executive Officer, that the company's
certification will be withdrawn if the non compliance's are not resolved.
Who is responsible for the welded products a company produces? - CORRECT
ANSWER-The company (1.2) The requirements of this standard are based on the
principle that a certified company has full responsibility for the quality of the
, welded product it produces and this responsibility cannot be transferred to its
employed or retained personnel or to the administrator of this standard.
Does this standard approve the products and services of a certified company? -
CORRECT ANSWER-(Cl. 1.3) This standard governs the certification of
companies. Certification pertains to the capability of the company with respect to
welding. Certification should not be construed as approving any products or
services of the certified company.
What requirements are stipulated in CSA Standard W47.1 - CORRECT
ANSWER-(Cl. 1.4) This standard stipulates requirements for:
- welding engineers
- welding supervisors
- tack welders, welders and welding operators
- documentation
What standard or code reference publications are referred to in CSA Standard
W47.1? - CORRECT ANSWER-(Cl. 2.1, 2.2) This standard refers to the following
publications, and where such reference is made, it shall be to the edition listed
below, including all amendments published there to:
Exam Newest 2026 Questions and Correct Detailed
Answers Already Graded A+
Does the CSA Standard W47.1 specify the requirements for a company seeking
certification? - CORRECT ANSWER-Yes, This standard provides the
requirements for the certification of companies engaged in the fusion welding of
steel and the qualification of their personnel and welding procedures (Cl 1.1)
What is a Welding Procedure Data Sheet (WPDS)? - CORRECT ANSWER-(Cl.3)
Welding Procedure Data Sheet (WPDS) - a document, used in conjunction with a
WPS, detailing the welding parameters and ranges for welding joint, over a range
of thicknesses and weld sizes, as illustrated on the data sheet
What are the responsibilities of a welding supervisor as defined in CSA Standard
W47.1? - CORRECT ANSWER-(Cl.3) Welding Supervisor - the company's
designated person(s) directly responsible for ensuring that qualified tack welders,
welders, and welding operators weld in accordance with approved or accepted
welding procedure data sheets in the shop and the field (Also see Cl 7.1)
,Who administers CSA Standard W47.1? - CORRECT ANSWER-(Cl. 4.1) This
standard shall be administered by the Canadian Welding Bureau.
For how long does a company's certification remain in effect? - CORRECT
ANSWER-(Cl.4.5) Certification shall continue in effect subject to periodic
verification by the Bureau that the requirements of the standard are being met.
Such verification's shall take place at the locations(s) where welding is being
performed by the company.
Can the Canadian Welding Bureau withdraw a company's certification? -
CORRECT ANSWER-Yes. (Cl. 4.6) For a company that is not meeting the
requirements of certification, the Canadian Welding Bureau shall notify the
individual identified in Clause 5.1.5 of the specific requirements that are not being
met. The company shall demonstrate to the Canadian Welding Bureau within a
reasonable period of time that the non compliance's have been resolved. In event
that a company does not resolve the non compliance's set out in the initial
notification, the Canadian Welding Bureau shall notify the Chief Executive Officer,
or a person designated by the Chief Executive Officer, that the company's
certification will be withdrawn if the non compliance's are not resolved.
Who is responsible for the welded products a company produces? - CORRECT
ANSWER-The company (1.2) The requirements of this standard are based on the
principle that a certified company has full responsibility for the quality of the
, welded product it produces and this responsibility cannot be transferred to its
employed or retained personnel or to the administrator of this standard.
Does this standard approve the products and services of a certified company? -
CORRECT ANSWER-(Cl. 1.3) This standard governs the certification of
companies. Certification pertains to the capability of the company with respect to
welding. Certification should not be construed as approving any products or
services of the certified company.
What requirements are stipulated in CSA Standard W47.1 - CORRECT
ANSWER-(Cl. 1.4) This standard stipulates requirements for:
- welding engineers
- welding supervisors
- tack welders, welders and welding operators
- documentation
What standard or code reference publications are referred to in CSA Standard
W47.1? - CORRECT ANSWER-(Cl. 2.1, 2.2) This standard refers to the following
publications, and where such reference is made, it shall be to the edition listed
below, including all amendments published there to:
