NYC NYCHA Supervisor Painter — Practice
Exam MCQs Questions and Answers
Rationale Latest Versions 2026 A+
Safety & Compliance (Q1–Q25)
Q1. PPE is selected primarily based on:
A) Company preference
B) Task hazards and chemical exposure risk
C) Paint brand marketing
D) Job duration only
Answer: B
Rationale: PPE must match the hazards (chemical, physical, and environmental risks), not
preferences.
Q2. Which is a common hazard when sanding old coatings?
A) Increased sunlight exposure
B) Excessive lead/dust particles (if present)
C) Reduced ladder safety
D) Higher brush speed
Answer: B
Rationale: Sanding can create dust; in older buildings, that dust may contain hazardous
materials.
Q3. If you suspect lead-based paint, you should:
A) Keep working faster to reduce time
B) Use proper containment and follow required procedures
C) Blow dust away with compressed air
D) Wet-spray only the floor, not the surface
Answer: B
Rationale: Suspicion requires controlled practices and compliance with lead safety rules.
Q4. Which is the safest way to handle solvents for cleanup?
A) Pour into open trash cans
B) Store properly and use ventilation as required
C) Keep containers uncapped for faster drying
D) Mix different solvents to save time
Answer: B
Rationale: Solvents require proper storage, ventilation, and correct handling.
Q5. A major risk when using ladders is:
A) Over-tightening gloves
B) Incorrect placement and poor footing
,C) Wearing extra layers
D) Using fewer tools
Answer: B
Rationale: Ladder accidents commonly result from improper setup and unstable footing.
Q6. Before climbing a ladder, you should check:
A) Only the paint color
B) Condition, stability, angle/placement, and secure footing
C) Whether the ladder is heavy enough
D) Whether the weather is sunny
Answer: B
Rationale: Pre-checks reduce the chance of failure or slip.
Q7. Which practice reduces slip hazards during painting?
A) Leave paint spills to dry on their own
B) Immediately clean spills and keep floors clear
C) Use wet rags to wipe floors for hours
D) Ignore cords on the floor
Answer: B
Rationale: Cleaning spills and controlling trip/slip hazards are key safety controls.
Q8. Proper ventilation is most important when:
A) Applying paint indoors
B) Painting outdoors only
C) Touching up small areas with water-based paint
D) Using only dry rollers
Answer: A
Rationale: Indoors, fumes and solvent vapors can accumulate.
Q9. If a respirator is required, it should be:
A) Worn loosely for comfort
B) Fitted and used according to the program requirements
C) Shared with coworkers
D) Reused only without filters
Answer: B
Rationale: Respirators need correct fit and the proper filters for hazard control.
Q10. Which is correct regarding electrical safety near painting tools?
A) Wet mop around outlets while power is on
B) Replace damaged cords immediately; keep outlets covered
C) Tape over frayed cords permanently
D) Use extension cords without limits
Answer: B
Rationale: Damaged cords and improper power use create shock/fire hazards.
, Q11. You notice a coworker not wearing required eye protection. You should:
A) Ignore it
B) Stop and correct the behavior per safety expectations
C) Give them a rag to rub eyes
D) Increase workload to finish sooner
Answer: B
Rationale: Safety violations should be addressed immediately.
Q12. Fire safety matters during painting because:
A) Paint can be nonflammable always
B) Solvents and coatings may be flammable
C) Brushes automatically stop fires
D) Water-based paint never burns
Answer: B
Rationale: Many coatings/solvents can be flammable; fire precautions are necessary.
Q13. When applying coatings, workers should avoid:
A) Reading labels
B) Open flames around solvent use
C) Proper surface prep
D) Using correct application equipment
Answer: B
Rationale: Open flames can ignite flammable vapors.
Q14. Which is a good housekeeping practice?
A) Leave drop cloths rolled up to avoid tripping
B) Remove masking carefully after flash-off
C) Store tools and materials where they won’t block exits
D) Keep empty containers with product residue out in work area
Answer: C
Rationale: Housekeeping reduces trips and helps emergency access.
Q15. The best first step if you get coating on your skin is:
A) Wait until finished
B) Follow SDS/label instructions for immediate wash/flush
C) Cover it with another layer of paint
D) Scrub with harsh solvent immediately
Answer: B
Rationale: SDS/labels specify proper decontamination steps.
Q16. If a coworker shows symptoms from chemical exposure, you should:
A) Continue working and monitor later
B) Stop exposure, seek medical help, and follow emergency procedures
C) Clean tools first then treat
D) Ignore if symptoms are mild
Exam MCQs Questions and Answers
Rationale Latest Versions 2026 A+
Safety & Compliance (Q1–Q25)
Q1. PPE is selected primarily based on:
A) Company preference
B) Task hazards and chemical exposure risk
C) Paint brand marketing
D) Job duration only
Answer: B
Rationale: PPE must match the hazards (chemical, physical, and environmental risks), not
preferences.
Q2. Which is a common hazard when sanding old coatings?
A) Increased sunlight exposure
B) Excessive lead/dust particles (if present)
C) Reduced ladder safety
D) Higher brush speed
Answer: B
Rationale: Sanding can create dust; in older buildings, that dust may contain hazardous
materials.
Q3. If you suspect lead-based paint, you should:
A) Keep working faster to reduce time
B) Use proper containment and follow required procedures
C) Blow dust away with compressed air
D) Wet-spray only the floor, not the surface
Answer: B
Rationale: Suspicion requires controlled practices and compliance with lead safety rules.
Q4. Which is the safest way to handle solvents for cleanup?
A) Pour into open trash cans
B) Store properly and use ventilation as required
C) Keep containers uncapped for faster drying
D) Mix different solvents to save time
Answer: B
Rationale: Solvents require proper storage, ventilation, and correct handling.
Q5. A major risk when using ladders is:
A) Over-tightening gloves
B) Incorrect placement and poor footing
,C) Wearing extra layers
D) Using fewer tools
Answer: B
Rationale: Ladder accidents commonly result from improper setup and unstable footing.
Q6. Before climbing a ladder, you should check:
A) Only the paint color
B) Condition, stability, angle/placement, and secure footing
C) Whether the ladder is heavy enough
D) Whether the weather is sunny
Answer: B
Rationale: Pre-checks reduce the chance of failure or slip.
Q7. Which practice reduces slip hazards during painting?
A) Leave paint spills to dry on their own
B) Immediately clean spills and keep floors clear
C) Use wet rags to wipe floors for hours
D) Ignore cords on the floor
Answer: B
Rationale: Cleaning spills and controlling trip/slip hazards are key safety controls.
Q8. Proper ventilation is most important when:
A) Applying paint indoors
B) Painting outdoors only
C) Touching up small areas with water-based paint
D) Using only dry rollers
Answer: A
Rationale: Indoors, fumes and solvent vapors can accumulate.
Q9. If a respirator is required, it should be:
A) Worn loosely for comfort
B) Fitted and used according to the program requirements
C) Shared with coworkers
D) Reused only without filters
Answer: B
Rationale: Respirators need correct fit and the proper filters for hazard control.
Q10. Which is correct regarding electrical safety near painting tools?
A) Wet mop around outlets while power is on
B) Replace damaged cords immediately; keep outlets covered
C) Tape over frayed cords permanently
D) Use extension cords without limits
Answer: B
Rationale: Damaged cords and improper power use create shock/fire hazards.
, Q11. You notice a coworker not wearing required eye protection. You should:
A) Ignore it
B) Stop and correct the behavior per safety expectations
C) Give them a rag to rub eyes
D) Increase workload to finish sooner
Answer: B
Rationale: Safety violations should be addressed immediately.
Q12. Fire safety matters during painting because:
A) Paint can be nonflammable always
B) Solvents and coatings may be flammable
C) Brushes automatically stop fires
D) Water-based paint never burns
Answer: B
Rationale: Many coatings/solvents can be flammable; fire precautions are necessary.
Q13. When applying coatings, workers should avoid:
A) Reading labels
B) Open flames around solvent use
C) Proper surface prep
D) Using correct application equipment
Answer: B
Rationale: Open flames can ignite flammable vapors.
Q14. Which is a good housekeeping practice?
A) Leave drop cloths rolled up to avoid tripping
B) Remove masking carefully after flash-off
C) Store tools and materials where they won’t block exits
D) Keep empty containers with product residue out in work area
Answer: C
Rationale: Housekeeping reduces trips and helps emergency access.
Q15. The best first step if you get coating on your skin is:
A) Wait until finished
B) Follow SDS/label instructions for immediate wash/flush
C) Cover it with another layer of paint
D) Scrub with harsh solvent immediately
Answer: B
Rationale: SDS/labels specify proper decontamination steps.
Q16. If a coworker shows symptoms from chemical exposure, you should:
A) Continue working and monitor later
B) Stop exposure, seek medical help, and follow emergency procedures
C) Clean tools first then treat
D) Ignore if symptoms are mild
