AMRT QUESTIONS AND CORRECT
DETAILED ANSWERS (ALREADY
GRADED A+); LATEST EDITION 2026
A typical microbial-remediation project follows the proper
job sequencing steps: - correct answer- -
Identifying and stopping the source of moisture
-setting up containment
-establishing negative air
-removing contaminated building materials
-clean surfaces
-dry the affected areas
-conducting post-remediation evaluation
Aflatoxin - correct answer- -mycotoxins that
are known to be carcinogenic
can cause damage to liver
, Allergenic and/or contain toxins - correct answer-
Viable spores are in effect "alive" and can start new
colonies
antimicrobial bacteriostats - correct answer-
chemicals devised to suppress or retard bacterial growth
Antimicrobial biocides should be applied AFTER -
correct answer- Initial extraction of standing
sewage and cleanup
Antimicrobial biocides should be applied BEFORE -
correct answer- Final cleanup and rinse with
plain water
Antimicrobials are biocides - correct answer- -
chemical or physical agents having potential to kill or
inactive one or more types of microorganisms
-tested for effectiveness on non-porous surfaces
-pre-cleaning the surface before use is necessary due to
inactivity to organic matter
DETAILED ANSWERS (ALREADY
GRADED A+); LATEST EDITION 2026
A typical microbial-remediation project follows the proper
job sequencing steps: - correct answer- -
Identifying and stopping the source of moisture
-setting up containment
-establishing negative air
-removing contaminated building materials
-clean surfaces
-dry the affected areas
-conducting post-remediation evaluation
Aflatoxin - correct answer- -mycotoxins that
are known to be carcinogenic
can cause damage to liver
, Allergenic and/or contain toxins - correct answer-
Viable spores are in effect "alive" and can start new
colonies
antimicrobial bacteriostats - correct answer-
chemicals devised to suppress or retard bacterial growth
Antimicrobial biocides should be applied AFTER -
correct answer- Initial extraction of standing
sewage and cleanup
Antimicrobial biocides should be applied BEFORE -
correct answer- Final cleanup and rinse with
plain water
Antimicrobials are biocides - correct answer- -
chemical or physical agents having potential to kill or
inactive one or more types of microorganisms
-tested for effectiveness on non-porous surfaces
-pre-cleaning the surface before use is necessary due to
inactivity to organic matter
