HEO Module 4 Review – Basic Operational Techniques – Study Guide & Practice
Questions
Face the machine making three points of contact - correct answer ✔✔When dismounting a
machine, the operator should ________.
a. Face the machine making three points of contact
b. Face away from the machine
c. Climb down using any route available
d. Always dismount from the rear of the machine
Rollover Protection Structures - correct answer ✔✔OSHA and MSHA require that virtually all
heavy equipment be equipped with approved seatbelts and _______
a. Brush guards
b. Rollover Protection Structures
c. A backup alarm
D. Rollover alarms
Somewhere near each tire - correct answer ✔✔Tire Inflation pressures are often posted
_________
a. on the operator instrument panel
b. Somewhere near each tire
c. Under the engine hood
d. Above the front windshield
Track Shoes - correct answer ✔✔The metal tracks used on some machines are made of which
devices attached to a track chain?
a. Track shoes
Questions
Face the machine making three points of contact - correct answer ✔✔When dismounting a
machine, the operator should ________.
a. Face the machine making three points of contact
b. Face away from the machine
c. Climb down using any route available
d. Always dismount from the rear of the machine
Rollover Protection Structures - correct answer ✔✔OSHA and MSHA require that virtually all
heavy equipment be equipped with approved seatbelts and _______
a. Brush guards
b. Rollover Protection Structures
c. A backup alarm
D. Rollover alarms
Somewhere near each tire - correct answer ✔✔Tire Inflation pressures are often posted
_________
a. on the operator instrument panel
b. Somewhere near each tire
c. Under the engine hood
d. Above the front windshield
Track Shoes - correct answer ✔✔The metal tracks used on some machines are made of which
devices attached to a track chain?
a. Track shoes
