NEIEP 200 Final Exam | Actual Questions and
Answers | 2026 Update | 100% Correct.
Correct
Incorrect
Your answers
1 of 73
Term
If a hoist machine roped 1:1 is capable of running at 650 fpm, with a
capacity of 4500lbs, what would its capability be if roped 2:1?
Give this one a try later!
325 fpm at 9000lbs Elastic stretch
The elevator car being pulled into
Rail brackets
the over head.
Don't know?
2 of 73
Term
,Which lay of wire rope has the strand wires in line with the rope
axis?
Give this one a try later!
Long Lay Left Laying
Opposing Lay Regular Lay
Don't know?
3 of 73
Term
A reference mark from which vertical measurements are made is
known as a
Give this one a try later!
Station Mark Datum
Bench Mark Survey Mark
Don't know?
4 of 73
Term
,When using a circular saw, which of the following is correct?
Give this one a try later!
Never start the cut until the
Initiate the cut at slow RPM
blade is turning full RPM
Start the cut before the blade Begin the cut with the blade
reaches full RPM stationary
Don't know?
5 of 73
Term
When using Crosby clips, which of the following statements is
correct?
Give this one a try later!
To determine the correct minimum
To determine the correct minimum
spacing add 2 inches to the rope
spacing use the rope diameter as is.
diameter.
To determine the correct To determine the correct minimum
minimum spacing multiply the spacing divide the rope diameter by
rope diameter times 6. 3.
Don't know?
, 6 of 73
Term
Which of the following statements applies to the use of a hacksaw
on the job?
Give this one a try later!
Hacksaw blades must be
Hacksaw blades can be installed in
installed with the teeth facing
any direction.
forward.
Hacksaw blades must be installed Hacksaw blades should be
with the teeth facing backward. removed after each cut.
Don't know?
7 of 73
Term
What is the main link between the hoistway walls or building
structural steel and the rails?
Give this one a try later!
Fishplates U-grooves
Rail brackets Divider beams
Answers | 2026 Update | 100% Correct.
Correct
Incorrect
Your answers
1 of 73
Term
If a hoist machine roped 1:1 is capable of running at 650 fpm, with a
capacity of 4500lbs, what would its capability be if roped 2:1?
Give this one a try later!
325 fpm at 9000lbs Elastic stretch
The elevator car being pulled into
Rail brackets
the over head.
Don't know?
2 of 73
Term
,Which lay of wire rope has the strand wires in line with the rope
axis?
Give this one a try later!
Long Lay Left Laying
Opposing Lay Regular Lay
Don't know?
3 of 73
Term
A reference mark from which vertical measurements are made is
known as a
Give this one a try later!
Station Mark Datum
Bench Mark Survey Mark
Don't know?
4 of 73
Term
,When using a circular saw, which of the following is correct?
Give this one a try later!
Never start the cut until the
Initiate the cut at slow RPM
blade is turning full RPM
Start the cut before the blade Begin the cut with the blade
reaches full RPM stationary
Don't know?
5 of 73
Term
When using Crosby clips, which of the following statements is
correct?
Give this one a try later!
To determine the correct minimum
To determine the correct minimum
spacing add 2 inches to the rope
spacing use the rope diameter as is.
diameter.
To determine the correct To determine the correct minimum
minimum spacing multiply the spacing divide the rope diameter by
rope diameter times 6. 3.
Don't know?
, 6 of 73
Term
Which of the following statements applies to the use of a hacksaw
on the job?
Give this one a try later!
Hacksaw blades must be
Hacksaw blades can be installed in
installed with the teeth facing
any direction.
forward.
Hacksaw blades must be installed Hacksaw blades should be
with the teeth facing backward. removed after each cut.
Don't know?
7 of 73
Term
What is the main link between the hoistway walls or building
structural steel and the rails?
Give this one a try later!
Fishplates U-grooves
Rail brackets Divider beams
