Firefighter 2 Final Exam Questions
with All Actual 2025-2026 updated.
Which pneumatic tools are often used for delicate cutting operations and can cut case hardened
locks and steel? - Answer Whizzer saws
Which proportioning method uses an external pump or head pressure to force foam
concentrate into the fire stream at the correct ratio for the water flow? - Answer Premixing
method
What is the term used to describe forward velocity pressure at a discharge opening while water
is flowing? - Answer Flow pressure
Which of the following is NOT a question that would be asked concerning appliances during a
residential fire safety survey?
Are surge protectors being used?
Are appliances name brand?
Are electrical cords in good condition?
Are the units operating properly? - Answer are appliances name brand?
Which type of pressure can be measured with a pitot tube and gauge? - Answer Flow
pressure
Proportioning methods: When would batch mixing not be effective? - Answer On large
incidents because attack lines must be shut down when refilling an empty tank.
Water applied to ordinary combustibles usually _______. - Answer Reduce flame spread
Which type of valves are used to control the flow from the hydrant? - Answer Gate valves
The _____ the wood, the easier to ignite and the faster it loses structural integrity. - Answer
Smaller
The threads on pump male discharge outlets are protected by fittings called _____ _____. -
Answer Hose caps
, Who should begin stabilization of a patient trapped inside a vehicle? - Answer A rescuer with
EMT training
Name one element of patient removal: - Answer Covering sharp edges
Fixed-temperature heat detectors rated at _____(*f)(*c) are common for living spaces. - Answer
165 | 76
Cribbing is most commonly used to _________. - Answer stabilize objects
Which type of test should be preformed by private contractors or fire department personnel? -
Answer Standard testing
Which proportioning method is used with portable extinguishers, wheeled, extinguishers, skid-
mounted twin-agent units, and vehicle mounted tank systems? - Answer Premixing method
One of the most important practices to address to building occupants about fire safety is
_______. - Answer making sure to maintain clear and unobstructed exit pathways
Normal pressure exiting a system before water is released from a hydrant is called ______. -
Answer Static presssure
Energy created by moving parts on machines, such as belts and bearings - Answer
Mechanical heat energy
Water received from treatment facilities is delivered to ________ storage tanks before being
distributed throughout the area served. - Answer elevated
State 3 facts about service testing: - Answer 1. The test area should be smooth and free from
rock and debris
2. Hose should be tested in a paved area with room to lay out the hose
3. A water source sufficient for filling the hose is necessary
Describe Completed Foam: - Answer completed product after air is introduced into the foam
solution
What can hide fire hazards and impede paths of egress? - Answer poor housekeeping
with All Actual 2025-2026 updated.
Which pneumatic tools are often used for delicate cutting operations and can cut case hardened
locks and steel? - Answer Whizzer saws
Which proportioning method uses an external pump or head pressure to force foam
concentrate into the fire stream at the correct ratio for the water flow? - Answer Premixing
method
What is the term used to describe forward velocity pressure at a discharge opening while water
is flowing? - Answer Flow pressure
Which of the following is NOT a question that would be asked concerning appliances during a
residential fire safety survey?
Are surge protectors being used?
Are appliances name brand?
Are electrical cords in good condition?
Are the units operating properly? - Answer are appliances name brand?
Which type of pressure can be measured with a pitot tube and gauge? - Answer Flow
pressure
Proportioning methods: When would batch mixing not be effective? - Answer On large
incidents because attack lines must be shut down when refilling an empty tank.
Water applied to ordinary combustibles usually _______. - Answer Reduce flame spread
Which type of valves are used to control the flow from the hydrant? - Answer Gate valves
The _____ the wood, the easier to ignite and the faster it loses structural integrity. - Answer
Smaller
The threads on pump male discharge outlets are protected by fittings called _____ _____. -
Answer Hose caps
, Who should begin stabilization of a patient trapped inside a vehicle? - Answer A rescuer with
EMT training
Name one element of patient removal: - Answer Covering sharp edges
Fixed-temperature heat detectors rated at _____(*f)(*c) are common for living spaces. - Answer
165 | 76
Cribbing is most commonly used to _________. - Answer stabilize objects
Which type of test should be preformed by private contractors or fire department personnel? -
Answer Standard testing
Which proportioning method is used with portable extinguishers, wheeled, extinguishers, skid-
mounted twin-agent units, and vehicle mounted tank systems? - Answer Premixing method
One of the most important practices to address to building occupants about fire safety is
_______. - Answer making sure to maintain clear and unobstructed exit pathways
Normal pressure exiting a system before water is released from a hydrant is called ______. -
Answer Static presssure
Energy created by moving parts on machines, such as belts and bearings - Answer
Mechanical heat energy
Water received from treatment facilities is delivered to ________ storage tanks before being
distributed throughout the area served. - Answer elevated
State 3 facts about service testing: - Answer 1. The test area should be smooth and free from
rock and debris
2. Hose should be tested in a paved area with room to lay out the hose
3. A water source sufficient for filling the hose is necessary
Describe Completed Foam: - Answer completed product after air is introduced into the foam
solution
What can hide fire hazards and impede paths of egress? - Answer poor housekeeping
