NTN FireTEAM EXAM QUESTIONS
WITH CORRECT SOLUTIONS||100%
GUARANTEED PASS||ALREADY
GRADED A+||UPDATED 2026/2027
SYLLABUS||<<NEWEST VERSION>>
What tool is used to cut bolts? - ANSWER ✓ Hacksaw (NOT BOLTCUTTERS)
Mechanical Brick Factory: What do you do if there is unmelted material? -
ANSWER ✓ Stop, call mechanic
Mechanical Brick Factory: If you want more material from the start of the
assembly, what do you do? - ANSWER ✓ Adjust amount released by Hopper,
DONT adjust speed of belt
Mechanical Brick Factory: If the first grinder is stuck, what do you suspect? -
ANSWER ✓ There is a jam in the grinder
Mechanical Brick Factory: How do you fix a grinder jam? - ANSWER ✓ You put
it in reverse manually
Mechanical Brick Factory: How do you remove a molding station arm? -
ANSWER ✓ 1. Loosen middle nut
2. then remove end nut
Mechanical Brick Factory: If water is pouring over the edge, what do you suspect
is wrong? - ANSWER ✓ Green Filter CLOG
Mechanical Brick Factory: Water tank is rising quickly, how do you fix it? -
ANSWER ✓ Reduce amount of fresh water
Mechanical Brick Factory: What purpose does the shake motion have on the
washing tray? - ANSWER ✓ Shaking spins material to ensure all sides of material
get washed
, Mechanical Brick Factory: If there is a Gear valve that needs to be turned on and
off, what way do you turn it? - ANSWER ✓ righty - closee (CW)
lefty - open (CCW)
Mechanical Brick Factory: What is the purpose of a gasket/washer - ANSWER ✓
distributes pressure, reduce chance of loosening, seals opening
Mechanical electrical question: what happens in a CIRCUIT when you turn on a
light switch to turn lights on? - ANSWER ✓ Switched ON means the circuit
closes, which routes power to its purpose.
Switched off means the circuit is open, meaning no route for electricity to travel.
Mechanical Brick Factory: What do you look for on the gauges to ensure proper
functioning of equipment? - ANSWER ✓ If gauges are in the green, it is good to
go
Mechanical Brick Factory: VISUALLY, What would indicate a malfunction in the
grinding/melting station. - ANSWER ✓ the melting station is not supposed to
smoke, SMOKE = BAD
Mechanical Brick Factory: VISUALLY, if the shaker tray is empty, what would
you suspect needs to be fixed? - ANSWER ✓ Raw Material bin empty or jammed,
wont feed onto shaker tray
Math: 30 sections of hose on the Engine, 17 are taken off. How many left? -
ANSWER ✓ 13
Math: 30 sections of hose on the Engine, 7 are taken off. How many left? -
ANSWER ✓ 23
Math: 30 sections of hose on the Engine, 19 are taken off. How many left? -
ANSWER ✓ 11
Math: 30 sections of hose on the Engine, 27 are taken off. How many left? -
ANSWER ✓ 3
WITH CORRECT SOLUTIONS||100%
GUARANTEED PASS||ALREADY
GRADED A+||UPDATED 2026/2027
SYLLABUS||<<NEWEST VERSION>>
What tool is used to cut bolts? - ANSWER ✓ Hacksaw (NOT BOLTCUTTERS)
Mechanical Brick Factory: What do you do if there is unmelted material? -
ANSWER ✓ Stop, call mechanic
Mechanical Brick Factory: If you want more material from the start of the
assembly, what do you do? - ANSWER ✓ Adjust amount released by Hopper,
DONT adjust speed of belt
Mechanical Brick Factory: If the first grinder is stuck, what do you suspect? -
ANSWER ✓ There is a jam in the grinder
Mechanical Brick Factory: How do you fix a grinder jam? - ANSWER ✓ You put
it in reverse manually
Mechanical Brick Factory: How do you remove a molding station arm? -
ANSWER ✓ 1. Loosen middle nut
2. then remove end nut
Mechanical Brick Factory: If water is pouring over the edge, what do you suspect
is wrong? - ANSWER ✓ Green Filter CLOG
Mechanical Brick Factory: Water tank is rising quickly, how do you fix it? -
ANSWER ✓ Reduce amount of fresh water
Mechanical Brick Factory: What purpose does the shake motion have on the
washing tray? - ANSWER ✓ Shaking spins material to ensure all sides of material
get washed
, Mechanical Brick Factory: If there is a Gear valve that needs to be turned on and
off, what way do you turn it? - ANSWER ✓ righty - closee (CW)
lefty - open (CCW)
Mechanical Brick Factory: What is the purpose of a gasket/washer - ANSWER ✓
distributes pressure, reduce chance of loosening, seals opening
Mechanical electrical question: what happens in a CIRCUIT when you turn on a
light switch to turn lights on? - ANSWER ✓ Switched ON means the circuit
closes, which routes power to its purpose.
Switched off means the circuit is open, meaning no route for electricity to travel.
Mechanical Brick Factory: What do you look for on the gauges to ensure proper
functioning of equipment? - ANSWER ✓ If gauges are in the green, it is good to
go
Mechanical Brick Factory: VISUALLY, What would indicate a malfunction in the
grinding/melting station. - ANSWER ✓ the melting station is not supposed to
smoke, SMOKE = BAD
Mechanical Brick Factory: VISUALLY, if the shaker tray is empty, what would
you suspect needs to be fixed? - ANSWER ✓ Raw Material bin empty or jammed,
wont feed onto shaker tray
Math: 30 sections of hose on the Engine, 17 are taken off. How many left? -
ANSWER ✓ 13
Math: 30 sections of hose on the Engine, 7 are taken off. How many left? -
ANSWER ✓ 23
Math: 30 sections of hose on the Engine, 19 are taken off. How many left? -
ANSWER ✓ 11
Math: 30 sections of hose on the Engine, 27 are taken off. How many left? -
ANSWER ✓ 3
