CORE PRACTICE SOLUTION PREP 2026 VIEW
AHEAD TESTED SET
◉ Per OSHA 1926.1411 (Table T)
Minimum Line Clearance Distances While Traveling Are. Answer:
<0.75kv / 4'
0.75-50kv / 6'
50kv-345kv / 10'
345kv-750kv / 16'
750kv-1000kv / 20'
"Over 1000kv, utility/ registered professional engineer, who is
qualified, dictates allowable distances."
◉ Per OSHA 1926.1407-1411
While Traveling, Or stationary,
A Dedicated Spotter is Required?. Answer: When any part of Crane
will come closer than 20' of energized conducter, Any Voltage Under
1000kv.
◉ Per OSHA 1926.1410
, An Insulating link/device must be installed where?. Answer:
Between end of load line, (or below), and the load.
◉ Per OSHA 1926.1407-1411
When using a tagline around energized lines it must be?. Answer:
Non-conductive, (Polypropylene)
◉ Employer must _____ to the Operators and Crew Members
Assigned to Work around Energized Conductors.. Answer: Train and
Explain Dangers and Hazards
◉ Per OSHA 1926.1401
A Qualified Person Is?. Answer: By possession of a degree,
certificate, professional standing, or by extensive knowledge,
training and experience successfully demonstrates the ability to
resolve/solve problems related to the subject matter, work, or the
project.
◉ Per OSHA 1926.1401
AHEAD TESTED SET
◉ Per OSHA 1926.1411 (Table T)
Minimum Line Clearance Distances While Traveling Are. Answer:
<0.75kv / 4'
0.75-50kv / 6'
50kv-345kv / 10'
345kv-750kv / 16'
750kv-1000kv / 20'
"Over 1000kv, utility/ registered professional engineer, who is
qualified, dictates allowable distances."
◉ Per OSHA 1926.1407-1411
While Traveling, Or stationary,
A Dedicated Spotter is Required?. Answer: When any part of Crane
will come closer than 20' of energized conducter, Any Voltage Under
1000kv.
◉ Per OSHA 1926.1410
, An Insulating link/device must be installed where?. Answer:
Between end of load line, (or below), and the load.
◉ Per OSHA 1926.1407-1411
When using a tagline around energized lines it must be?. Answer:
Non-conductive, (Polypropylene)
◉ Employer must _____ to the Operators and Crew Members
Assigned to Work around Energized Conductors.. Answer: Train and
Explain Dangers and Hazards
◉ Per OSHA 1926.1401
A Qualified Person Is?. Answer: By possession of a degree,
certificate, professional standing, or by extensive knowledge,
training and experience successfully demonstrates the ability to
resolve/solve problems related to the subject matter, work, or the
project.
◉ Per OSHA 1926.1401
