CORE ACTUAL ASSESSMENT PREP 2026
COMPLETE SOLVED QUESTIONS
◉ ASME B30.3. Answer: Tower Cranes
◉ ASME B30.23. Answer: Personel Lifting Regs
◉ OSHA 29 CFR 1926.1400 Series. Answer: Cranes & Derrick's used
in Construction regs.
◉ Rotation Resistant Wire Rope. Answer: 2 randomly broken wires
in 6 diameters.
4 randomly broken wires in 30 diameters.
Safety factor 5.0
Safety factor personel lifts 10-1
◉ ASME B30.9. Answer: Slings
◉ Personel Platforms
,ASME B30.23. Answer: Maximum Wind 15mph
Cranes capacity not exceed 50%
Rigging 5-1 Safety Factor, if Wire Rope Bridal must use MasterLink
or Shackle Attachment.
Wire Rope Safety Factor 7-1, Rotation Resistant 10-1
Sling eyes must have thimbles.
Load test platform 125% / 5 minutes before use.
Frequent + daily inspection.
100' per minute lower speed.
Gate must Open Inward.
◉ OSHA 29 CFR 1926.1402
Ground Conditions. Answer: Ground must be firm, graded and
drained.
Warn Operator of Locations of Hazards.
, ◉ Outriggers + Dunnage. Answer: Pads should be Secured To
Outriggers.
Outrigger Floats + Mats should be able to Support Total Weight of
Crane and Load, including rigging.
Fully extended, tires off ground. Free of Crane weight.
If cannot fully extend outriggers, on rubber chart should be used.
Unless have load chart for partially extended.
Outrigger Pads Must be 90° angle to cylinder.
Mats and Blocking used to distribute bearing pressure.
Never block under outrigger beams.
Truck crane pick over front require front outrigger load chart.
Spans and gapped blocking fails at 50% load and destroys pads.
◉ Swing Clearance. Answer: Swing clearance must be barricaded. (2'
outside swing radius)
COMPLETE SOLVED QUESTIONS
◉ ASME B30.3. Answer: Tower Cranes
◉ ASME B30.23. Answer: Personel Lifting Regs
◉ OSHA 29 CFR 1926.1400 Series. Answer: Cranes & Derrick's used
in Construction regs.
◉ Rotation Resistant Wire Rope. Answer: 2 randomly broken wires
in 6 diameters.
4 randomly broken wires in 30 diameters.
Safety factor 5.0
Safety factor personel lifts 10-1
◉ ASME B30.9. Answer: Slings
◉ Personel Platforms
,ASME B30.23. Answer: Maximum Wind 15mph
Cranes capacity not exceed 50%
Rigging 5-1 Safety Factor, if Wire Rope Bridal must use MasterLink
or Shackle Attachment.
Wire Rope Safety Factor 7-1, Rotation Resistant 10-1
Sling eyes must have thimbles.
Load test platform 125% / 5 minutes before use.
Frequent + daily inspection.
100' per minute lower speed.
Gate must Open Inward.
◉ OSHA 29 CFR 1926.1402
Ground Conditions. Answer: Ground must be firm, graded and
drained.
Warn Operator of Locations of Hazards.
, ◉ Outriggers + Dunnage. Answer: Pads should be Secured To
Outriggers.
Outrigger Floats + Mats should be able to Support Total Weight of
Crane and Load, including rigging.
Fully extended, tires off ground. Free of Crane weight.
If cannot fully extend outriggers, on rubber chart should be used.
Unless have load chart for partially extended.
Outrigger Pads Must be 90° angle to cylinder.
Mats and Blocking used to distribute bearing pressure.
Never block under outrigger beams.
Truck crane pick over front require front outrigger load chart.
Spans and gapped blocking fails at 50% load and destroys pads.
◉ Swing Clearance. Answer: Swing clearance must be barricaded. (2'
outside swing radius)
