NOCTI Carpentry Exam Questions And Answers|
Latest Update
10 ft.
According to OSHA safety regulations, guardrails or personal fall arrest systems for fall
prevention/protection are required for workers on scaffold platforms_______ feet high or
higher
Quarter
The proper angle for setting up a ladder is to place its base a __________ of the work length of
the ladder from the wall or other vertical surface.
Stability and reactivity
A Safety Data Sheet (SDS) provides information about first aid measures, handing and storage,
and __________
OSHA
Compliance with ________ will help to prevent needless accidents and minimize injuries.
Weight of the head
How is a hammers size determined
90-degree
A combination square can layout a 45 degree and a _________ angle.
Framing square
Used when stepping off the length of a rafter
,Speed square
Used to make basic measurements and mark lines
T-bevel
An adjustable gauge for setting and transferring angles
Builder's level
Used to set level points and check elevations
Electrical Shock
Double-insulated tools are designed to prevent
16-gauge nailer
What nailer is most appropriate for the job of installing crown moulding?
18-gauge nailer
What nailer is MOST appropriate for installing baseboard shoe moulding?
Concrete symbol
Earth symbol
, 10 feet, 0 inches
On a drawing where 1/4 inch= 1 foot, a line measuring 2-1/2 inches represents an actual
distance of...
12 feet
On a drawing where 1/4 inch= 1-1/2 feet, a line measuring 2 inches represents an actual
distance of...
10 feet, 6 inches
On a drawing where 3/4 inch= 1 foot, a line measuring 14 inches represents an actual distance
of...
Plot
A plan giving precise location f manmade features located on a property.
Elevation
The height above or below a fixed reference point
Foundation
Part of a structural system that supports and anchors a building
Latest Update
10 ft.
According to OSHA safety regulations, guardrails or personal fall arrest systems for fall
prevention/protection are required for workers on scaffold platforms_______ feet high or
higher
Quarter
The proper angle for setting up a ladder is to place its base a __________ of the work length of
the ladder from the wall or other vertical surface.
Stability and reactivity
A Safety Data Sheet (SDS) provides information about first aid measures, handing and storage,
and __________
OSHA
Compliance with ________ will help to prevent needless accidents and minimize injuries.
Weight of the head
How is a hammers size determined
90-degree
A combination square can layout a 45 degree and a _________ angle.
Framing square
Used when stepping off the length of a rafter
,Speed square
Used to make basic measurements and mark lines
T-bevel
An adjustable gauge for setting and transferring angles
Builder's level
Used to set level points and check elevations
Electrical Shock
Double-insulated tools are designed to prevent
16-gauge nailer
What nailer is most appropriate for the job of installing crown moulding?
18-gauge nailer
What nailer is MOST appropriate for installing baseboard shoe moulding?
Concrete symbol
Earth symbol
, 10 feet, 0 inches
On a drawing where 1/4 inch= 1 foot, a line measuring 2-1/2 inches represents an actual
distance of...
12 feet
On a drawing where 1/4 inch= 1-1/2 feet, a line measuring 2 inches represents an actual
distance of...
10 feet, 6 inches
On a drawing where 3/4 inch= 1 foot, a line measuring 14 inches represents an actual distance
of...
Plot
A plan giving precise location f manmade features located on a property.
Elevation
The height above or below a fixed reference point
Foundation
Part of a structural system that supports and anchors a building
