UPS FEEDER (DOK) EXAM
QUESTIONS & ANSWERS
How do you notify employees inside a trailer before coupling or movement will occur? -
Correct Answers -It is the driver's responsibility to walk to the rear of the trailer and
visually and audibly notify anyone in the area that you're about to couple and/or move
the trailer.
What are the procedures for cutting or applying seals at the guard shake? - Correct
Answers -STOP/SECURE the vehicle. Shut off the engine. Hand the guard the tractor
keys and seal controls, wait for the guard to return the keys, and give the all-clear
signal.
3rd Yard Control Safety Rule - Correct Answers -When on break, all employees are
required to remain in designated break areas.
4th Yard Control Safety Rule - Correct Answers -Persons authorized to drive vehicles in
the yard must obey posted speed limit signs and wear a safety belt at all times.
1st Yard Control Safety Rule - Correct Answers -Only certified Yard personnel and
drivers are allowed in the yard outside of the designated pedestrian walkways and
break areas.
2nd Yard Control Safety Rule - Correct Answers -All facility employees, whether
certified or non-certified, must use pedestrian doors to enter or exit the building.
5th Yard Control Safety Rule - Correct Answers -Vehicles must be equipped with
operable headlights, hazard lights, or reflective material that provides 360 degrees of
visibility.
6th Yard Control Safety Rule - Correct Answers -Employees authorized to drive vehicles
in the yard are required to take the keys/IVIS with them whenever they leave the
vehicle.
7th Yard Control Safety Rule - Correct Answers -All certified yard employees and
drivers are required to wear a reflective vest anytime they are working in the yard.
8th Yard Control Safety Rule - Correct Answers -All certified yard employees must
utilize an orange cone when working in the yard.
QUESTIONS & ANSWERS
How do you notify employees inside a trailer before coupling or movement will occur? -
Correct Answers -It is the driver's responsibility to walk to the rear of the trailer and
visually and audibly notify anyone in the area that you're about to couple and/or move
the trailer.
What are the procedures for cutting or applying seals at the guard shake? - Correct
Answers -STOP/SECURE the vehicle. Shut off the engine. Hand the guard the tractor
keys and seal controls, wait for the guard to return the keys, and give the all-clear
signal.
3rd Yard Control Safety Rule - Correct Answers -When on break, all employees are
required to remain in designated break areas.
4th Yard Control Safety Rule - Correct Answers -Persons authorized to drive vehicles in
the yard must obey posted speed limit signs and wear a safety belt at all times.
1st Yard Control Safety Rule - Correct Answers -Only certified Yard personnel and
drivers are allowed in the yard outside of the designated pedestrian walkways and
break areas.
2nd Yard Control Safety Rule - Correct Answers -All facility employees, whether
certified or non-certified, must use pedestrian doors to enter or exit the building.
5th Yard Control Safety Rule - Correct Answers -Vehicles must be equipped with
operable headlights, hazard lights, or reflective material that provides 360 degrees of
visibility.
6th Yard Control Safety Rule - Correct Answers -Employees authorized to drive vehicles
in the yard are required to take the keys/IVIS with them whenever they leave the
vehicle.
7th Yard Control Safety Rule - Correct Answers -All certified yard employees and
drivers are required to wear a reflective vest anytime they are working in the yard.
8th Yard Control Safety Rule - Correct Answers -All certified yard employees must
utilize an orange cone when working in the yard.
