VA HIC Exam | Just Released
Comprehensive Resource To Help You Ace 2026-2027 Exams
Includes Frequently Tested Questions With ELABORATED
100% Correct COMPLETE SOLUTIONS
Guaranteed Pass First Attempt!! Current Update!!
Instant Download Pdf
1. Enter and proceed" is presented as a ________ on the raised touchable surface on a
function key."
a. Triangle
b. Double Line
c. Circle
d. Dotted Line
- Correct Answer: c. Circle
2. In new buildings, thresholds at doorways should be no higher than ________.
a. 1/2"
b. 1-1/4"
c. 3/4"
d. 1/4"
- Correct Answer: 1/2"
3. The maximum knee clearance shall be permitted to extend _____ under an element that
is 9" above the floor.
a. 30"
b. 18"
c. 36"
d. 25"
,- Correct Answer: d. 25"
4. In existing buildings and facilities, the turning space shall be a circular space with a
_____ minimum diameter.
a. 60-inch
b. 50-inch
c. 70-inch
d. 55-inch
- Correct Answer:
a. 60-inch
5. The brightness of the elevator car landing sill, threshold platform and controls are to be
no less than _______ foot candles.
a. 15
b. 10
c. 54
d. 5
- Correct Answer: d. 5
6. The clear width of an exterior accessible route located within seating areas shall be
_____ minimum.
a. 42 inches
b. 48 inches
c. 36 inches
d. 32 inches
- Correct Answer: c. 36 inches
7. In a Type A unit, if measuring to the highest part of the rim or highest part of the
counter, what is the maximum height of the sink front above the floor?
a. 28"
b. 34"
c. 36"
d. 32"
- Correct Answer: b. 34"
8. What is the least diameter of grab bars with circular cross sections?
, a. 1"
b. 2"
c. 1-1/4"
d. 1-1/2"
- Correct Answer: c. 1-1/4"
9. All hardware such as handles, locks, or any other operable parts shall be _____
minimum above the floor.
a. 30"
b. 34"
c. 36"
d. 20"
- Correct Answer: b. 34"
10. What is the minimum diameter of a circular turnaround area in a new building.
a. 67"
b. 47"
c. 20"
d. 50" - Correct Answer:
a. 67"
11. What components shall not be part of an accessible route
a. Elevators & Platform Lifts
b. Blended Transitions
c. Revolving doors & Turnstiles
d. Gates & Curb Ramps
- Correct Answer: c. Revolving doors & Turnstiles
12. The maximum height of existing elevator call buttons shall be permitted to be located
____ above the floor.
a. 45"
b. 48"
c. 54"
d. 42"
, - Correct Answer: c. 54"
13. In new construction, what is the maximum slope of a ramp?
a. 1 : 12
b. 1 : 10
c. 1 : 8
d. 1 : 20 - Correct Answer:
a. 1 : 12
14. Doorways shall have a clear opening width of 32 inches minimum. Projections into the
clear opening width between 34 inches and 80 inches above the floor shall not exceed:
a. 3 inches
b. 2 inches
c. 4 inches
d. 5 inches
- Correct Answer: c. 4 inches
The running slope of walking surfaces shall not be steeper than:
a. 1 : 12
b. 1 : 48
c. 1 : 8
d. 1 : 20 - Correct Answer: d. 1 : 20
In existing buildings and facilities, the clear width of a walking surface shall be permitted to be
reduced to _____ minimum for a length of 24 inches maximum.
a. 32 inches.
b. 30 inches.
c. 34 inches.
d. 36 inches.
- Correct Answer: a. 32 inches.
A hallway more than 24 inches long must have a clear width ______.
a. 36"
b. 32"
Comprehensive Resource To Help You Ace 2026-2027 Exams
Includes Frequently Tested Questions With ELABORATED
100% Correct COMPLETE SOLUTIONS
Guaranteed Pass First Attempt!! Current Update!!
Instant Download Pdf
1. Enter and proceed" is presented as a ________ on the raised touchable surface on a
function key."
a. Triangle
b. Double Line
c. Circle
d. Dotted Line
- Correct Answer: c. Circle
2. In new buildings, thresholds at doorways should be no higher than ________.
a. 1/2"
b. 1-1/4"
c. 3/4"
d. 1/4"
- Correct Answer: 1/2"
3. The maximum knee clearance shall be permitted to extend _____ under an element that
is 9" above the floor.
a. 30"
b. 18"
c. 36"
d. 25"
,- Correct Answer: d. 25"
4. In existing buildings and facilities, the turning space shall be a circular space with a
_____ minimum diameter.
a. 60-inch
b. 50-inch
c. 70-inch
d. 55-inch
- Correct Answer:
a. 60-inch
5. The brightness of the elevator car landing sill, threshold platform and controls are to be
no less than _______ foot candles.
a. 15
b. 10
c. 54
d. 5
- Correct Answer: d. 5
6. The clear width of an exterior accessible route located within seating areas shall be
_____ minimum.
a. 42 inches
b. 48 inches
c. 36 inches
d. 32 inches
- Correct Answer: c. 36 inches
7. In a Type A unit, if measuring to the highest part of the rim or highest part of the
counter, what is the maximum height of the sink front above the floor?
a. 28"
b. 34"
c. 36"
d. 32"
- Correct Answer: b. 34"
8. What is the least diameter of grab bars with circular cross sections?
, a. 1"
b. 2"
c. 1-1/4"
d. 1-1/2"
- Correct Answer: c. 1-1/4"
9. All hardware such as handles, locks, or any other operable parts shall be _____
minimum above the floor.
a. 30"
b. 34"
c. 36"
d. 20"
- Correct Answer: b. 34"
10. What is the minimum diameter of a circular turnaround area in a new building.
a. 67"
b. 47"
c. 20"
d. 50" - Correct Answer:
a. 67"
11. What components shall not be part of an accessible route
a. Elevators & Platform Lifts
b. Blended Transitions
c. Revolving doors & Turnstiles
d. Gates & Curb Ramps
- Correct Answer: c. Revolving doors & Turnstiles
12. The maximum height of existing elevator call buttons shall be permitted to be located
____ above the floor.
a. 45"
b. 48"
c. 54"
d. 42"
, - Correct Answer: c. 54"
13. In new construction, what is the maximum slope of a ramp?
a. 1 : 12
b. 1 : 10
c. 1 : 8
d. 1 : 20 - Correct Answer:
a. 1 : 12
14. Doorways shall have a clear opening width of 32 inches minimum. Projections into the
clear opening width between 34 inches and 80 inches above the floor shall not exceed:
a. 3 inches
b. 2 inches
c. 4 inches
d. 5 inches
- Correct Answer: c. 4 inches
The running slope of walking surfaces shall not be steeper than:
a. 1 : 12
b. 1 : 48
c. 1 : 8
d. 1 : 20 - Correct Answer: d. 1 : 20
In existing buildings and facilities, the clear width of a walking surface shall be permitted to be
reduced to _____ minimum for a length of 24 inches maximum.
a. 32 inches.
b. 30 inches.
c. 34 inches.
d. 36 inches.
- Correct Answer: a. 32 inches.
A hallway more than 24 inches long must have a clear width ______.
a. 36"
b. 32"
