1|Page
CSA STANDARD W47.1-09 - CWB WELDING
SUPERVISOR STUDY GUIDE EXAM 2026 ALL
QUESTIONS AND CORRECT DETAILED
ANSWERS |ALREADY A GRADED WITH EXPERT
FEEDBACK |NEW AND REVISED
Does the CSA Standard W47.1 specify the requirements for a company
seeking certification? - ANSWER- Yes, This standard provides the
requirements for the certification of companies engaged in the fusion
welding of steel and the qualification of their personnel and welding
procedures (Cl 1.1)
Who is responsible for the welded products a company produces? -
ANSWER- The company (1.2) The requirements of this standard are
based on the principle that a certified company has full responsibility for
the quality of the welded product it produces and this responsibility
cannot be transferred to its employed or retained personnel or to the
administrator of this standard.
Does this standard approve the products and services of a certified
company? - ANSWER- (Cl. 1.3) This standard governs the certification
of companies. Certification pertains to the capability of the company
with respect to welding. Certification should not be construed as
approving any products or services of the certified company.
,2|Page
What requirements are stipulated in CSA Standard W47.1 - ANSWER-
(Cl. 1.4) This standard stipulates requirements for:
- welding engineers
- welding supervisors
- tack welders, welders and welding operators
- documentation
What standard or code reference publications are referred to in CSA
Standard W47.1? - ANSWER- (Cl. 2.1, 2.2) This standard refers to the
following publications, and where such reference is made, it shall be to
the edition listed below, including all amendments published there to:
CSA (Canadian Standards Association)
CAN/CSA-G30.18-M92(R2007) - Billet-steel bars for concrete
reinforcement
G40.20/G40.21-04(R2009) - General requirements for rolled or welded
structural quality steel/ Structural quality steel
W48-06 - Filler metals and allied materials for metal arc welding
W59-03(R2008) - Welded steel construction (metal arc welding)
CAN/CSA-W117.2-06 - Safety in welding, cutting, and allied processes
W178.1-08 - Certification of welding inspection organizations
ASTM International (American Society for Testing and Materials)
, 3|Page
A 370-08a - Standard Test Methods and Definitions for Mechanical
Testing of Steel Products
E 10-07a - Standard Test Method for Brinell Hardness of Metallic
Materials.
E23-07ae1 - Standard Test Methods for Notched Bar Impact Testing of
Metallic Materials
AWS (American Welding Society)
A3.0-01
Standard Definitions; Including Terms for Adhesive Bonding, Brazing,
Soldering, Thermal Cutting, and Thermal Spraying
A5.12/A5.12M-98 (R2007) - Specification for Tungsten and Tungsten-
Alloy Electrodes for Arc Welding and Cutting
A.518/A518M-05 - Specification for Carbon Steel Electrodes and Rods
for Gas Shielded Arc Welding
A5.23/A5.23M-07 - Specification for Low-Alloy Steel Electrodes and
Fluxes for Submerged Arc Welding
A5.28/A5.28M-05 - Specification for Low-Alloy Steel Electrodes and
Rods for Gas Shielded Arc Welding
D1.1/D1.1M - Structural Welding Code - Steel
D1.3/D1.3M - Structural Welding Code - Sheet Steel
D1.6/D1.6M - Structural Welding Code - Stainless Steel
SCC (Standards Council of Canada)
Can-P-4E - General requirements for the Competence of Testing and
Calibration Laboratories.
CSA STANDARD W47.1-09 - CWB WELDING
SUPERVISOR STUDY GUIDE EXAM 2026 ALL
QUESTIONS AND CORRECT DETAILED
ANSWERS |ALREADY A GRADED WITH EXPERT
FEEDBACK |NEW AND REVISED
Does the CSA Standard W47.1 specify the requirements for a company
seeking certification? - ANSWER- Yes, This standard provides the
requirements for the certification of companies engaged in the fusion
welding of steel and the qualification of their personnel and welding
procedures (Cl 1.1)
Who is responsible for the welded products a company produces? -
ANSWER- The company (1.2) The requirements of this standard are
based on the principle that a certified company has full responsibility for
the quality of the welded product it produces and this responsibility
cannot be transferred to its employed or retained personnel or to the
administrator of this standard.
Does this standard approve the products and services of a certified
company? - ANSWER- (Cl. 1.3) This standard governs the certification
of companies. Certification pertains to the capability of the company
with respect to welding. Certification should not be construed as
approving any products or services of the certified company.
,2|Page
What requirements are stipulated in CSA Standard W47.1 - ANSWER-
(Cl. 1.4) This standard stipulates requirements for:
- welding engineers
- welding supervisors
- tack welders, welders and welding operators
- documentation
What standard or code reference publications are referred to in CSA
Standard W47.1? - ANSWER- (Cl. 2.1, 2.2) This standard refers to the
following publications, and where such reference is made, it shall be to
the edition listed below, including all amendments published there to:
CSA (Canadian Standards Association)
CAN/CSA-G30.18-M92(R2007) - Billet-steel bars for concrete
reinforcement
G40.20/G40.21-04(R2009) - General requirements for rolled or welded
structural quality steel/ Structural quality steel
W48-06 - Filler metals and allied materials for metal arc welding
W59-03(R2008) - Welded steel construction (metal arc welding)
CAN/CSA-W117.2-06 - Safety in welding, cutting, and allied processes
W178.1-08 - Certification of welding inspection organizations
ASTM International (American Society for Testing and Materials)
, 3|Page
A 370-08a - Standard Test Methods and Definitions for Mechanical
Testing of Steel Products
E 10-07a - Standard Test Method for Brinell Hardness of Metallic
Materials.
E23-07ae1 - Standard Test Methods for Notched Bar Impact Testing of
Metallic Materials
AWS (American Welding Society)
A3.0-01
Standard Definitions; Including Terms for Adhesive Bonding, Brazing,
Soldering, Thermal Cutting, and Thermal Spraying
A5.12/A5.12M-98 (R2007) - Specification for Tungsten and Tungsten-
Alloy Electrodes for Arc Welding and Cutting
A.518/A518M-05 - Specification for Carbon Steel Electrodes and Rods
for Gas Shielded Arc Welding
A5.23/A5.23M-07 - Specification for Low-Alloy Steel Electrodes and
Fluxes for Submerged Arc Welding
A5.28/A5.28M-05 - Specification for Low-Alloy Steel Electrodes and
Rods for Gas Shielded Arc Welding
D1.1/D1.1M - Structural Welding Code - Steel
D1.3/D1.3M - Structural Welding Code - Sheet Steel
D1.6/D1.6M - Structural Welding Code - Stainless Steel
SCC (Standards Council of Canada)
Can-P-4E - General requirements for the Competence of Testing and
Calibration Laboratories.
