Verified Detailed Answers; for Guaranteed
This NEIEP 700 Final Exam evaluates an apprentice's knowledge of
elevator control logic, electrical theory, and solid-state drives. The 88-
question practice sets are designed to test your ability to read wiring
diagrams, troubleshoot electrical faults, and understand elevator sequence
of operations.
Exam Focus Areas
The 88 practice questions and quiz bank heavily cover core industrial and
elevator-specific concepts:
• Electrical Theory & Components: Sizing fuses, measuring
voltage/current with a VOM multimeter, calculating DC voltage from
AC inputs, and identifying capacitor behavior.
• Logic Controls: Understanding straight-line wiring diagrams,
troubleshooting relay coils, latching relays, and reading electrical
interlock schematics.
• Elevator Drives & Motors: How SCR and VVVF static drives work,
brake operations, and identifying rectifier setups.
• Safety & Code: Knowing the proper stopping distance relative to car
speed and understanding shunt trip circuit breaker applications.
Practice Resource
,You can review this exact 88-question exam bank and verified Q&A
solutions on this document
Quiz_________________?
The coil will not pull in despite measuring full line voltage directly across it. -
Answer☑️
Open Coil
Quiz_________________?
What happens when the switch is closed, then opened? -
Answer☑️
Relay 1 off-delays, Relay 2 drops immediately
Quiz_________________?
What will normally happen if an unintentional ground is introduced in a
grounded control system? -
Answer☑️
A fuse will blow
Quiz_________________?
Condition of relays 2F1-3 when the car is traveling up between the second
and third floors. -
, Answer☑️
Self Holding
Quiz_________________?
What happens if contact 1F2 7/9 (1F2) fails to close when the car runs
down? -
Answer☑️
The car will not run down
Quiz_________________?
Which contact(s) change the direction of the door motor when opening and
closing? -
Answer☑️
O1,02,C1, AND C2
Quiz_________________?
What should the stopping distance be if a car speed were 100 FPM? -
Answer☑️
24 inches
Quiz_________________?
What should the stopping distance be if a car speed were 125 FPM? -
This NEIEP 700 Final Exam evaluates an apprentice's knowledge of
elevator control logic, electrical theory, and solid-state drives. The 88-
question practice sets are designed to test your ability to read wiring
diagrams, troubleshoot electrical faults, and understand elevator sequence
of operations.
Exam Focus Areas
The 88 practice questions and quiz bank heavily cover core industrial and
elevator-specific concepts:
• Electrical Theory & Components: Sizing fuses, measuring
voltage/current with a VOM multimeter, calculating DC voltage from
AC inputs, and identifying capacitor behavior.
• Logic Controls: Understanding straight-line wiring diagrams,
troubleshooting relay coils, latching relays, and reading electrical
interlock schematics.
• Elevator Drives & Motors: How SCR and VVVF static drives work,
brake operations, and identifying rectifier setups.
• Safety & Code: Knowing the proper stopping distance relative to car
speed and understanding shunt trip circuit breaker applications.
Practice Resource
,You can review this exact 88-question exam bank and verified Q&A
solutions on this document
Quiz_________________?
The coil will not pull in despite measuring full line voltage directly across it. -
Answer☑️
Open Coil
Quiz_________________?
What happens when the switch is closed, then opened? -
Answer☑️
Relay 1 off-delays, Relay 2 drops immediately
Quiz_________________?
What will normally happen if an unintentional ground is introduced in a
grounded control system? -
Answer☑️
A fuse will blow
Quiz_________________?
Condition of relays 2F1-3 when the car is traveling up between the second
and third floors. -
, Answer☑️
Self Holding
Quiz_________________?
What happens if contact 1F2 7/9 (1F2) fails to close when the car runs
down? -
Answer☑️
The car will not run down
Quiz_________________?
Which contact(s) change the direction of the door motor when opening and
closing? -
Answer☑️
O1,02,C1, AND C2
Quiz_________________?
What should the stopping distance be if a car speed were 100 FPM? -
Answer☑️
24 inches
Quiz_________________?
What should the stopping distance be if a car speed were 125 FPM? -
