DTS BE105 THE GOSPELS ACTUAL
ASSESSMENT PAPER 2026 EXTENSIVE
QUESTIONS PLUS ACCURATE SOLUTIONS
VERIFIED GRADED A+
⩥ Which encryption method is the most secure for a wireless network?
Answer: WPA2
⩥ How many channels are available with IEEE 802.11g? Answer: 11
⩥ What is the last step of the basic
wireless access point (WAP)
setup? Answer: Apply security.
⩥ All 802.11 standards use one of two frequency bands. What are these
frequency bands? Answer: 2.4 GHz and 5 GHz bands.
⩥ In which OS reference model layer do WLAN
s operate? Answer: The data link layer
⩥ Which organization regulates the use of WLAN devices in the
United States? Answer: FCC
,⩥ Which of the following IEEE 802.11 WLAN standards specifies
both spread spectrum RF and IR transmission technologies? Answer:
802.11
⩥ Why has it become cost-effective for enterprise companies to
integrate WLAN segments into their networks? Answer: The cost of
wireless technology has decreased and the quality
has increased
⩥ Which one of the following IEEE wireless standards utilizes the
5 GHz frequency band for its signal transmissions? Answer: 802.11n
⩥ Why are WLANs usually deployed in an access capacity
instead of as the network's core layer? Answer: WLANs are generally
incapable of meeting the requirements of
the network core layer, which needs to be very fast and stable,
able to handle a tremendous amount of traffic with little difficulty,
and must experience no down time.
⩥ What type of connectivity is needed to connect networks
between two buildings located across the street from each
other? Answer: Point-to-point (P2P).
, ⩥ In which of the following applications might a WLAN be
deployed in a distribution layer role? Answer: As a building-to-building
bridge used to link corporate network
segments.
⩥ What specific problem does a WLAN resolve for corporations
and home users? Answer: Excessive data cabling.
⩥ What challenges do WISPs have to overcome in order to
provide "last mile data delivery"
to customers? Answer: Distance to APs, rooftop access, lightning, trees,
mountains,
tower access, and other physical obstacles to connectivity.
⩥ A transmitter outputs 100 mW. An antenna cable connects the
transmitter to an amplifier, and the power into the amplifier's
input measures 50 ml. The amplifier increases the signal to
the original transmitter's power level and sends the signal to
the antenna. The antenna receives the signal from the
amplifier at 75 mW, and then transmits at 150 mW. What is the
IR's power level in this F circuit? Answer: 75mW
ASSESSMENT PAPER 2026 EXTENSIVE
QUESTIONS PLUS ACCURATE SOLUTIONS
VERIFIED GRADED A+
⩥ Which encryption method is the most secure for a wireless network?
Answer: WPA2
⩥ How many channels are available with IEEE 802.11g? Answer: 11
⩥ What is the last step of the basic
wireless access point (WAP)
setup? Answer: Apply security.
⩥ All 802.11 standards use one of two frequency bands. What are these
frequency bands? Answer: 2.4 GHz and 5 GHz bands.
⩥ In which OS reference model layer do WLAN
s operate? Answer: The data link layer
⩥ Which organization regulates the use of WLAN devices in the
United States? Answer: FCC
,⩥ Which of the following IEEE 802.11 WLAN standards specifies
both spread spectrum RF and IR transmission technologies? Answer:
802.11
⩥ Why has it become cost-effective for enterprise companies to
integrate WLAN segments into their networks? Answer: The cost of
wireless technology has decreased and the quality
has increased
⩥ Which one of the following IEEE wireless standards utilizes the
5 GHz frequency band for its signal transmissions? Answer: 802.11n
⩥ Why are WLANs usually deployed in an access capacity
instead of as the network's core layer? Answer: WLANs are generally
incapable of meeting the requirements of
the network core layer, which needs to be very fast and stable,
able to handle a tremendous amount of traffic with little difficulty,
and must experience no down time.
⩥ What type of connectivity is needed to connect networks
between two buildings located across the street from each
other? Answer: Point-to-point (P2P).
, ⩥ In which of the following applications might a WLAN be
deployed in a distribution layer role? Answer: As a building-to-building
bridge used to link corporate network
segments.
⩥ What specific problem does a WLAN resolve for corporations
and home users? Answer: Excessive data cabling.
⩥ What challenges do WISPs have to overcome in order to
provide "last mile data delivery"
to customers? Answer: Distance to APs, rooftop access, lightning, trees,
mountains,
tower access, and other physical obstacles to connectivity.
⩥ A transmitter outputs 100 mW. An antenna cable connects the
transmitter to an amplifier, and the power into the amplifier's
input measures 50 ml. The amplifier increases the signal to
the original transmitter's power level and sends the signal to
the antenna. The antenna receives the signal from the
amplifier at 75 mW, and then transmits at 150 mW. What is the
IR's power level in this F circuit? Answer: 75mW
