NATE Heat Pump Verified Study Guide Exam Latest
2026/2027 Updated Verified Questions and Solutions A+
Pass Guaranteed
Leave the first rating
Save
Students also studied
Flashcard sets Study guides
Heat Pump ESCO 2025 Chapter 7 Professional Development Chapter ... AB
130 terms 12 terms 44 terms Te
itbelikedatt Preview rmounts Preview ds9warp10 Preview
Terms in this set (50)
Charging a heat pump with refrigerant is best B: Cooling mode
accomplished in the _______ mode.
A: Heating mode
B: Cooling mode
C: Defrost mode
D: Emergency heating mode
Heat pumps can provide both heating in the winter and A: Heating mode
cooling in the summer. In which mode is the heat pump
more efficient?
A: Heating mode
B: Cooling mode
C: Defrost mode
D: Emergency heating mode
, Which of the following components is exclusive to the C: Reversing valve
heat pump?
A: Condenser
B: Oil separator
C: Reversing valve
D: Accumulator
Which of the following airflow rates is the most D: 450 cfm per ton
reasonable for a heat pump system operating in the
heating cycle?
A: 200 cfm per ton
B: 300 cfm per ton
C: 400 cfm per ton
D: 450 cfm per ton
During the heat pump's cooling cycle, the outdoor coil A: Condenser, evaporator
is utilized as a _________ while the indoor coil is utilized as
a____________.
A: Condenser, evaporator
B: Evaporator, condenser
C: Compressor, accumulator
D: Accumulator, condenser
Heat is present in winter outdoor air until the outside air D: -459 degrees F
ambient temperature reaches a low temperature of:
Technically this is true, but not practical. A heat pump is doing good to
A: 0 degrees F continue to work below 10 deg F unless specifically designed for lower
temperatures.
B: 32 degrees F
C: 273 degrees F
D: -459 degrees F
2026/2027 Updated Verified Questions and Solutions A+
Pass Guaranteed
Leave the first rating
Save
Students also studied
Flashcard sets Study guides
Heat Pump ESCO 2025 Chapter 7 Professional Development Chapter ... AB
130 terms 12 terms 44 terms Te
itbelikedatt Preview rmounts Preview ds9warp10 Preview
Terms in this set (50)
Charging a heat pump with refrigerant is best B: Cooling mode
accomplished in the _______ mode.
A: Heating mode
B: Cooling mode
C: Defrost mode
D: Emergency heating mode
Heat pumps can provide both heating in the winter and A: Heating mode
cooling in the summer. In which mode is the heat pump
more efficient?
A: Heating mode
B: Cooling mode
C: Defrost mode
D: Emergency heating mode
, Which of the following components is exclusive to the C: Reversing valve
heat pump?
A: Condenser
B: Oil separator
C: Reversing valve
D: Accumulator
Which of the following airflow rates is the most D: 450 cfm per ton
reasonable for a heat pump system operating in the
heating cycle?
A: 200 cfm per ton
B: 300 cfm per ton
C: 400 cfm per ton
D: 450 cfm per ton
During the heat pump's cooling cycle, the outdoor coil A: Condenser, evaporator
is utilized as a _________ while the indoor coil is utilized as
a____________.
A: Condenser, evaporator
B: Evaporator, condenser
C: Compressor, accumulator
D: Accumulator, condenser
Heat is present in winter outdoor air until the outside air D: -459 degrees F
ambient temperature reaches a low temperature of:
Technically this is true, but not practical. A heat pump is doing good to
A: 0 degrees F continue to work below 10 deg F unless specifically designed for lower
temperatures.
B: 32 degrees F
C: 273 degrees F
D: -459 degrees F