OPERATOR SC STUDY SET C AND
D LATEST UPDATE 2026/2027
GRADED A+ .
,1. Always a piece of equipment before attempting a repair: Lockout/Tagout
2. Before entering a confined space, you should check for oxygen levels no less than _ or greater than _.: 19.5% &
23.5%
3. The greatest hazard with the generation and handling of carbon dioxide is
.: Asphyxiation
4. The most hazardous condition associated with storage areas, slurry tanks, or other confined spaces where
activated carbon is present is ----: Depletion of oxygen
5. Ventilation or a blower should be placed at least feet from manhole and at a
angle to the wind direction to allow communication and prevent contaminants entering the manhole: 6 feet, right
angle
6. and should be located in an easily accessible place known to all employees: Fire extinguishers, first
aid kits
7. A pipet with TD printed on it means '' ": To deliver
8. The jar test is used to establish optimum dosage in the process: coagula-
tion/flocculation
9. Three waterborne diseases are : typhoid fever, dysentery and cholera
10. are the most frequent injuries occurring in water operations: Strains and Sprains
11. Methane gas is dangerous because it is : explosive
12. amperes of electricity is sufficient to injure or kill a person: 1/3 amps
13. The most reliable backflow preventor is the : Air Gap
14. The device is the most reliable backflow if an air gap is not in place: RP (Reduced Pressure)
15. Public health is the primary concern regarding : effluent disposal
16. First aid for first degree bums would be to : immediately submerge burn in cold water
17. The purpose of a backflow preventer is to : prevent contamination of a water supply
18. is very effective in cleaning up a polymer spill: Salt
19. An example of a Class A fire would be ✔✔ correct answer wood burning
20. An example of a Class B fire would be ✔✔ correct answer Chemical Burning
21. An example of a Class C fire would be ✔✔ correct answer Electrical Fire
, 22. An example of a Class D fire would be ✔✔ correct answer Flammable Metals