In the victim location marking system, the marking used to X through the V
indicate that the victim has been removed is a/an:
The inhalation of concrete dust is an irritant to the lungs pneumonia
and may cause _______ if the rescuer is unprotected.
When using a generator to provide lighting at the scene, divide the load between the circuits
emergency rescuers should ensure that if two or more
receptacles are used to prevent overload, they:
Good rescuer rehabilitation practices include: avoiding the use of carbonated drinks
1. Light dim or dark areas during rescue operations to all statements are correct
ensure proper operation of all tools and equipment.
2. Fuel equipment in a designated safe area, away from
operations
3. Rotate rescue equipment regularly to provide onsite
maintenance and inspection.
A simple device that can be used for determining change in a pump bob
lean for small to moderate structures is:
, When preforming a recon and hasty search, preforming physical search with hailing
the first method normally used is to:
When cutting wood that may be used under stress, you make a relief cut in the area under compression
should:
The first and most important step to prolong blade life in a the selection of the proper wheel
cutting wheel is:
1. Rescue specialists should only use tools that they have Only statement 1 is correct
been properly trained to use.
2. Store tools in a tool staging area or return them to
operations at base.
3. Use tools for multiple purposes during rescue
operations.
Which of the following is not a safety precaution when Use oxygen to clean pneumatic tools or blow dust off clothing
using oxygen?
Survival guidelines include: conserving strength, fluids, and heat
indicate that the victim has been removed is a/an:
The inhalation of concrete dust is an irritant to the lungs pneumonia
and may cause _______ if the rescuer is unprotected.
When using a generator to provide lighting at the scene, divide the load between the circuits
emergency rescuers should ensure that if two or more
receptacles are used to prevent overload, they:
Good rescuer rehabilitation practices include: avoiding the use of carbonated drinks
1. Light dim or dark areas during rescue operations to all statements are correct
ensure proper operation of all tools and equipment.
2. Fuel equipment in a designated safe area, away from
operations
3. Rotate rescue equipment regularly to provide onsite
maintenance and inspection.
A simple device that can be used for determining change in a pump bob
lean for small to moderate structures is:
, When preforming a recon and hasty search, preforming physical search with hailing
the first method normally used is to:
When cutting wood that may be used under stress, you make a relief cut in the area under compression
should:
The first and most important step to prolong blade life in a the selection of the proper wheel
cutting wheel is:
1. Rescue specialists should only use tools that they have Only statement 1 is correct
been properly trained to use.
2. Store tools in a tool staging area or return them to
operations at base.
3. Use tools for multiple purposes during rescue
operations.
Which of the following is not a safety precaution when Use oxygen to clean pneumatic tools or blow dust off clothing
using oxygen?
Survival guidelines include: conserving strength, fluids, and heat
