AUTO BODY SEMESTER FINAL 2 CORRECT 100%

AUTO BODY SEMESTER FINAL 2
CORRECT 100%
Technician A says that metamerism is a condition in which a color appears different
under different types of light. Technician A says that reflection means a light passes
through something and a different color comes out the other side.
A. Technician A
B. Technician B
C. Both Technician A & B
D. Neither Technician A or B - ANSWERA. Technician A

Technician A says that color deficiency means a person sees no color at all. Technician
B says that metamerism should be judged by viewing the color at a side tone angle.
A. Technician A
B. Technician B
C. Both Technician A & B
D. Neither Technician A or B - ANSWERD. Neither Technician A or B

Technician A says that reflection means light bounces off of a surface. Technician B
says that a color variance on a vehicle can occur because different factories may be
used to produce the same model of car.
A. Technician A
B. Technician B
C. Both Technician A & B
D. Neither Technician A or B - ANSWERC. Both Technician A & B

Technician A says that color fatigue can occur after staring at a color for only 2
seconds. Technician B says that a side tone angle means a vehicle's color is evaluated
at an angle of 45° or less.
A. Technician A
B. Technician B
C. Both Technician A & B
D. Neither Technician A or B - ANSWERB. Technician B

Technician A says that secondary colors are orange, teal, and violet. Technician B says
that CRI is an acronym for Color Rendering Index.
A. Technician A
B. Technician B
C. Both Technician A & B
D. Neither Technician A or B - ANSWERC. Both Technician A & B

Primary colors are yellow, blue, red, and green.
True or False? - ANSWERTrue

, ROY G BIV is a mnemonic (memory device) for red, orange, yellow, green, blue, indigo,
and violet.
True or False? - ANSWERTrue

Color is described as having three dimensions: ____________________, value, and
chroma. - ANSWERHue

Technician A says that color deficiency affects women more than men. Technician B
says that flop is a condition in which a color containing metallic and/or mica looks
different at different angles.
A. Technician A
B. Technician B
C. Both Technician A & B
D. Neither Technician A or B - ANSWERB. Technician B

Technician A says that if a color is found to be non-blendable, the first consideration
should be tinting. Technician B says that when matching a color and describing hue,
only the color to the right or left of the color to be matched can be compared against it.
A. Technician A
B. Technician B
C. Both Technician A & B
D. Neither Technician A or B - ANSWERB. Technician B

Depending on the light source and whether it contains a full color spectrum of
wavelengths may cause the paint to look different in different types of light, a condition
called ____________________. - ANSWERMetamerism

Technician A says that hue is the dimension of color that describes its color. Technician
B says that CRI is a measurement of color corrected light.
A. Technician A
B. Technician B
C. Both Technician A & B
D. Neither Technician A or B - ANSWERC. Both Technician A & B

To determine the number of coats needed for a multi-stage color, a sprayout panel
should be made.
True or False? - ANSWERFalse

When plotting a color, it should be evaluated in the order of value, hue, and chroma.
True or False? - ANSWERTrue

A(n) ____________________ panel is a panel that is used to match a multi-stage finish.
It is generally larger than a sprayout panel and should have a hiding sticker applied. -
ANSWERLetdown