3CX BASIC FINAL ASSESSMENT PAPER
2026 COMPLETE QUESTIONS AND
VERIFIED NETWORK COMMUNICATION
SOLUTIONS
◉ The installer configures the operating system time zone according
to what you selected during the Linux and Windows wizard.
Answer: T
◉ The 3CX Client can be installed on computers running Windows,
MacOS, Android and iOS operating systems
Answer: T
◉ You must set up your own PUSH account to use the 3CX Client on
Android.
Answer: NO
◉ A DIGITAL RECEPTIONIST can be configured to route calls based
on caller voice input.
Answer: F
,◉ Digital Receptionists have the ability to smartly dial extensions
through the CALL BY NAME functionality, where the first 3 letters of
the last name must be entered on the phones keyboard
Answer: T
◉ All Emergency Numbers must be configured in the 3CX
Management Console
Answer: T
◉ A supported IP phone can be configured manually by completing
each configuration on the web interface of the device, one by one. Is
the device still covered by 3CX Support when problems occur with
manual configuration?
Answer: NO
◉ When adding VoIP providers, you should ensure that firewall
verification has run before configuration, without any reported
errors
Answer: T
◉ SIP ALG must be disabled on your firewall as it
UNCONTROLLABLY alters the content within packets that are
sent/received
Answer: T
, ◉ A single digital receptionist can handle multiple calls at the same
time
Answer: T
◉ Using VoIP providers only requires that the forwarded/NAT ports
on your firewall be SIP port (default 5060 UDP/TCP) and audio
ports (default 9000-10999 UDP).
Answer: T
◉ Can the 3CX control unit be installed, activated and operated
without internet access?
Answer: NO
◉ The default length of the Voicemail PIN is 3 digits
Answer: F
◉ Take a look at the edit comparison page
(https://www.3cx.com/ordering/pricing/) and answer the
following question: You want to test how two 3CX PBX installations
can be joined. One license is a 3CX FREE EDITION and the other a
3CX ENTERPRISE EDITION. Can these editions be connected via a
Bridge?
Answer: NO
2026 COMPLETE QUESTIONS AND
VERIFIED NETWORK COMMUNICATION
SOLUTIONS
◉ The installer configures the operating system time zone according
to what you selected during the Linux and Windows wizard.
Answer: T
◉ The 3CX Client can be installed on computers running Windows,
MacOS, Android and iOS operating systems
Answer: T
◉ You must set up your own PUSH account to use the 3CX Client on
Android.
Answer: NO
◉ A DIGITAL RECEPTIONIST can be configured to route calls based
on caller voice input.
Answer: F
,◉ Digital Receptionists have the ability to smartly dial extensions
through the CALL BY NAME functionality, where the first 3 letters of
the last name must be entered on the phones keyboard
Answer: T
◉ All Emergency Numbers must be configured in the 3CX
Management Console
Answer: T
◉ A supported IP phone can be configured manually by completing
each configuration on the web interface of the device, one by one. Is
the device still covered by 3CX Support when problems occur with
manual configuration?
Answer: NO
◉ When adding VoIP providers, you should ensure that firewall
verification has run before configuration, without any reported
errors
Answer: T
◉ SIP ALG must be disabled on your firewall as it
UNCONTROLLABLY alters the content within packets that are
sent/received
Answer: T
, ◉ A single digital receptionist can handle multiple calls at the same
time
Answer: T
◉ Using VoIP providers only requires that the forwarded/NAT ports
on your firewall be SIP port (default 5060 UDP/TCP) and audio
ports (default 9000-10999 UDP).
Answer: T
◉ Can the 3CX control unit be installed, activated and operated
without internet access?
Answer: NO
◉ The default length of the Voicemail PIN is 3 digits
Answer: F
◉ Take a look at the edit comparison page
(https://www.3cx.com/ordering/pricing/) and answer the
following question: You want to test how two 3CX PBX installations
can be joined. One license is a 3CX FREE EDITION and the other a
3CX ENTERPRISE EDITION. Can these editions be connected via a
Bridge?
Answer: NO
