ACI - Concrete Strength Technician Training
EXAM, MOST TESTED QUESTIONS AND
VERIFIED SOLUTIONS/GET IT 100% ACCURATE!!
2026!!
Save
Practice questions for this set
Learn 1 /7 Study with Learn
4
Choose an answer
The bearing face should be able to
Standard Practice for Capping
1 2 be tilted at least__ degrees in any
Cylindrical Concrete Specimens
direction. (C39)
The working surface of a capping
T/F Plaster of paris is an example of
3 4 plate shall not depart from plane
a high-strength plaster
by more than___ mm.
Don't know?
, Terms in this set (85)
Standard Practice for Capping ASTM C617
Cylindrical Concrete Specimens
Procedures for capping enable Perpendicularity, Planeness
concrete cylinders and cores to
meet C617's practice requirements
for___ and___.
___ can be made of glass, machined Capping plates
metal, polished granite, or diabase.
(C617)
Sulfur caps can be formed against Metal, stone
___ or___ plates.
The working surface of a capping 0.05
plate shall not depart from plane
by more than___ mm.
Device used in conjunction with a Alignment device
capping plate to ensure
perpendicularity.
Perpendicularity requirement of the 0.5
axis of a cylindrical specimen.
(degrees)
The element of a melting pot that Peripheral Heating
ensures against accidents during
reheating of cooled sulfur.
Temperature of the sulfur mortar 265-290 F
pot/materials.
EXAM, MOST TESTED QUESTIONS AND
VERIFIED SOLUTIONS/GET IT 100% ACCURATE!!
2026!!
Save
Practice questions for this set
Learn 1 /7 Study with Learn
4
Choose an answer
The bearing face should be able to
Standard Practice for Capping
1 2 be tilted at least__ degrees in any
Cylindrical Concrete Specimens
direction. (C39)
The working surface of a capping
T/F Plaster of paris is an example of
3 4 plate shall not depart from plane
a high-strength plaster
by more than___ mm.
Don't know?
, Terms in this set (85)
Standard Practice for Capping ASTM C617
Cylindrical Concrete Specimens
Procedures for capping enable Perpendicularity, Planeness
concrete cylinders and cores to
meet C617's practice requirements
for___ and___.
___ can be made of glass, machined Capping plates
metal, polished granite, or diabase.
(C617)
Sulfur caps can be formed against Metal, stone
___ or___ plates.
The working surface of a capping 0.05
plate shall not depart from plane
by more than___ mm.
Device used in conjunction with a Alignment device
capping plate to ensure
perpendicularity.
Perpendicularity requirement of the 0.5
axis of a cylindrical specimen.
(degrees)
The element of a melting pot that Peripheral Heating
ensures against accidents during
reheating of cooled sulfur.
Temperature of the sulfur mortar 265-290 F
pot/materials.
