OHIO Lead Risk Assessor Study Guide/Terms Test EXAM
LATEST 2025/2026 ACTUAL TEST ACCURATE QUESTIONS
AND CORRECT DETAILED ANSWERS (CORRECT VERIFIED
SOLUTIONS) CURRENTLY UPDATED VERSION |ALREADY
GRADED A+
What law governs training of lead workers in HUD houses?
EPA Toxic Substance Control Act.
A lead-based paint inspection is best described as:
A surface-by-surface investigation to determine the presence
of lead-based paint.
Title X of the 1992 Housing and Community Development Act requires
that federally owned or assisted housing be:
Inspected for lead-based paint, assessed for risks posed by lead
present, provided control measures for lead hazards found.
The following is not a method of abatement for lead-based paint:
Coating with latex paint.
,When using an XRF analyzer what device should an inspector use
to monitor radiation?
Dosimeter
EPA recommends that we use XRF instruments for which HUD and
EPA have developed:
Performance characteristics sheet
When surfaces do not allow for use of an XRF, we should take paint
chips and send them to labs accredited by:
The National Lead Laboratory Accreditation Program (NLLAP)
, The degree of agreement of repeated measurements when using an
instrument, such as, an XRF is called:
Precision
Inspectors should check XRF's calibration at a minimum:
At the beginning of each inspection, every four hours during an
inspection, and at the end of each inspection.
When is it advisable to group interior components with
exterior components for the purpose of testing for paint?
We should NEVER group interior with exterior.
For the purposes of a lead inspection our definition of multifamily
housing could include units of similar in construction when:
Any number of units built from 1960 to 1977.
When performing an inspection an inspection for lead-based
paint, a testing combination is made up of the:
Room equivalent, component and substrate.
LATEST 2025/2026 ACTUAL TEST ACCURATE QUESTIONS
AND CORRECT DETAILED ANSWERS (CORRECT VERIFIED
SOLUTIONS) CURRENTLY UPDATED VERSION |ALREADY
GRADED A+
What law governs training of lead workers in HUD houses?
EPA Toxic Substance Control Act.
A lead-based paint inspection is best described as:
A surface-by-surface investigation to determine the presence
of lead-based paint.
Title X of the 1992 Housing and Community Development Act requires
that federally owned or assisted housing be:
Inspected for lead-based paint, assessed for risks posed by lead
present, provided control measures for lead hazards found.
The following is not a method of abatement for lead-based paint:
Coating with latex paint.
,When using an XRF analyzer what device should an inspector use
to monitor radiation?
Dosimeter
EPA recommends that we use XRF instruments for which HUD and
EPA have developed:
Performance characteristics sheet
When surfaces do not allow for use of an XRF, we should take paint
chips and send them to labs accredited by:
The National Lead Laboratory Accreditation Program (NLLAP)
, The degree of agreement of repeated measurements when using an
instrument, such as, an XRF is called:
Precision
Inspectors should check XRF's calibration at a minimum:
At the beginning of each inspection, every four hours during an
inspection, and at the end of each inspection.
When is it advisable to group interior components with
exterior components for the purpose of testing for paint?
We should NEVER group interior with exterior.
For the purposes of a lead inspection our definition of multifamily
housing could include units of similar in construction when:
Any number of units built from 1960 to 1977.
When performing an inspection an inspection for lead-based
paint, a testing combination is made up of the:
Room equivalent, component and substrate.
