NYC Electrician Comprehensive TEST BANK FINAL
EXAM| NEWEST ACTUAL EXAM COMPLETE
QUESTIONS AND CORRECT DETAILED ANSWERS
(VERIFIED ANSWERS) |ALREADY GRADED
A+||BRAND NEW!! 2026-2027
In Class I, Division 1 locations, a conduit to a splice box must be
sealed if if the trade size is?
A) 1 inch or larger
B) 2 1/2 inches or larger
C) 2 inches or larger
D) 1/2 inch or larger
ANSWERS: C) 2 inches or larger Article 501.15 (A) (1)
,What is the maximum overcurrent protective device allowed on a
480 volt branch circuit with several small motors connected all of
which are under 1 HP and the maximum load of each motor is 5
amps?
A) 10 amps
B) 15 amps
C) 20 amps
D) 30 amps
B) 15 amps
ANSWERS: Article 430.53 (A)
,What may be the locked rotor current be assumed to be for small
motor compressors not having the locked rotor current marked
on the
nameplate?
A) 2 times the rated load current
B) 4 times the rated load current
C) 6 times the rated load current
D) 8 times the rated load current
ANSWERS: C) 6 times the rated
load current Article 440.12 (C)
For continuous duty, the conductors connecting the secondary of
a wound rotor AC motor to its controller must have an Ampacity
not less than what the percent of the full load secondary current
of the motor?
A) 100%
B) 110%
C) 125%
D) 130%
ANSWERS: C) 125%
Article 430.23 (A)
, In a 3 wire, 3 phase AC system feeding a motor, with one conductor
grounded, where must fuses for motor overload protection be
inserted in the circuit?
A) a fuse must be inserted in each ungrounded conductor and
also in the grounded conductor
B) no fuses are required for motor overload protection
C) a fuse must be inserted only in each ungrounded conductor
D) none of the above answers is correct
ANSWERS: a fuse must be inserted in each ungrounded
conductor and also in the grounded conductor
Article 430.36
Motor starter rheostats for DC motors operated from a constant voltage
supply must be equipped with automatic devices that will interrupt the
power supply before the speed of the motor falls to a certain level. What is
this speed?
A) 1/2 its normal rate
B) 1/3 its normal rate
C) 3/4 its normal rate
D) 2/3 its normal rate
ANSWERS: B) 1/3
its normal rate Article
EXAM| NEWEST ACTUAL EXAM COMPLETE
QUESTIONS AND CORRECT DETAILED ANSWERS
(VERIFIED ANSWERS) |ALREADY GRADED
A+||BRAND NEW!! 2026-2027
In Class I, Division 1 locations, a conduit to a splice box must be
sealed if if the trade size is?
A) 1 inch or larger
B) 2 1/2 inches or larger
C) 2 inches or larger
D) 1/2 inch or larger
ANSWERS: C) 2 inches or larger Article 501.15 (A) (1)
,What is the maximum overcurrent protective device allowed on a
480 volt branch circuit with several small motors connected all of
which are under 1 HP and the maximum load of each motor is 5
amps?
A) 10 amps
B) 15 amps
C) 20 amps
D) 30 amps
B) 15 amps
ANSWERS: Article 430.53 (A)
,What may be the locked rotor current be assumed to be for small
motor compressors not having the locked rotor current marked
on the
nameplate?
A) 2 times the rated load current
B) 4 times the rated load current
C) 6 times the rated load current
D) 8 times the rated load current
ANSWERS: C) 6 times the rated
load current Article 440.12 (C)
For continuous duty, the conductors connecting the secondary of
a wound rotor AC motor to its controller must have an Ampacity
not less than what the percent of the full load secondary current
of the motor?
A) 100%
B) 110%
C) 125%
D) 130%
ANSWERS: C) 125%
Article 430.23 (A)
, In a 3 wire, 3 phase AC system feeding a motor, with one conductor
grounded, where must fuses for motor overload protection be
inserted in the circuit?
A) a fuse must be inserted in each ungrounded conductor and
also in the grounded conductor
B) no fuses are required for motor overload protection
C) a fuse must be inserted only in each ungrounded conductor
D) none of the above answers is correct
ANSWERS: a fuse must be inserted in each ungrounded
conductor and also in the grounded conductor
Article 430.36
Motor starter rheostats for DC motors operated from a constant voltage
supply must be equipped with automatic devices that will interrupt the
power supply before the speed of the motor falls to a certain level. What is
this speed?
A) 1/2 its normal rate
B) 1/3 its normal rate
C) 3/4 its normal rate
D) 2/3 its normal rate
ANSWERS: B) 1/3
its normal rate Article
