MASTER ELECTRICIAN TEST 211 TEST BANK FINAL
EXAM| NEWEST ACTUAL EXAM COMPLETE
QUESTIONS AND CORRECT DETAILED ANSWERS
(VERIFIED ANSWERS) |ALREADY GRADED
A+||BRAND NEW!! 2026-2027
Which of the following is a multi - wire branch circuit?
A) Multiple conductors made up in the form of a cable
B) Conductors used to connect the non - current - carrying metal
parts of appliances
C) A circuit that direct connects the service equipment to the main
circuit breaker
D) A circuit that consists of two or more ungrounded
conductors and a grounded conductor
A circuit that consists of two or more ungrounded conductors and a
grounded conductor.
(article 100)
,A listed assembly of two , three, or four insulated circuit conductors
within a NONMETALLIC jacket, an extruded thermoplastic
covering, or a sealed
nonmetallic covering that can be mounted directly on the surface
of walls and ceilings is the definition for:
A) Flat conductor cable
B) Flat cable assemblies
C) Nonmetallic sheath cable
D) Concealable nonmetallic extension
Concealable nonmetallic extension
(article 382.2)
A group of devices that serve to govern in some predetermined
manner the electric power delivered to the apparatus to which it
is connected is a ?
A) Device
B) Controller
C) Disconnect
D) Circuit breaker
Controller
(article 100)
,For a service panel fed by parallel 3/0 AWG copper conductors,
the copper GROUNDING - ELECTRODE run from the service panel
to the metallic
water service shall be at least size _____ AWG
A) 4
B) 2
C) 1/0
D) 2/0
2
(table 250.66)
A dry - type TRANSFORMER may be LOCATED in a suspended ceiling
space where it is not ready ACCESSIBLE if the voltage is 600
volts or less and has a maximum rating of kva
A) 10
B) 25
C) 50
D( 112
50
(article 450.13 (B) )
, A SERVICE head can be located no further away from the
point of attachment than inches
A) 18
B) 24
C) 36
D) 48
24"
(article 230.54) (C) (exceptions)
ACCEPTABLE METHODS of connecting GROUNDING and
BONDING conductors include all the following, EXCEPT:
A) Solder joints
B) Terminal bars
C) Exothermic weld
D) Listed pressure connectors
solder joints
(article 250.8 (A)
EXAM| NEWEST ACTUAL EXAM COMPLETE
QUESTIONS AND CORRECT DETAILED ANSWERS
(VERIFIED ANSWERS) |ALREADY GRADED
A+||BRAND NEW!! 2026-2027
Which of the following is a multi - wire branch circuit?
A) Multiple conductors made up in the form of a cable
B) Conductors used to connect the non - current - carrying metal
parts of appliances
C) A circuit that direct connects the service equipment to the main
circuit breaker
D) A circuit that consists of two or more ungrounded
conductors and a grounded conductor
A circuit that consists of two or more ungrounded conductors and a
grounded conductor.
(article 100)
,A listed assembly of two , three, or four insulated circuit conductors
within a NONMETALLIC jacket, an extruded thermoplastic
covering, or a sealed
nonmetallic covering that can be mounted directly on the surface
of walls and ceilings is the definition for:
A) Flat conductor cable
B) Flat cable assemblies
C) Nonmetallic sheath cable
D) Concealable nonmetallic extension
Concealable nonmetallic extension
(article 382.2)
A group of devices that serve to govern in some predetermined
manner the electric power delivered to the apparatus to which it
is connected is a ?
A) Device
B) Controller
C) Disconnect
D) Circuit breaker
Controller
(article 100)
,For a service panel fed by parallel 3/0 AWG copper conductors,
the copper GROUNDING - ELECTRODE run from the service panel
to the metallic
water service shall be at least size _____ AWG
A) 4
B) 2
C) 1/0
D) 2/0
2
(table 250.66)
A dry - type TRANSFORMER may be LOCATED in a suspended ceiling
space where it is not ready ACCESSIBLE if the voltage is 600
volts or less and has a maximum rating of kva
A) 10
B) 25
C) 50
D( 112
50
(article 450.13 (B) )
, A SERVICE head can be located no further away from the
point of attachment than inches
A) 18
B) 24
C) 36
D) 48
24"
(article 230.54) (C) (exceptions)
ACCEPTABLE METHODS of connecting GROUNDING and
BONDING conductors include all the following, EXCEPT:
A) Solder joints
B) Terminal bars
C) Exothermic weld
D) Listed pressure connectors
solder joints
(article 250.8 (A)
