GAS G1 FUEL GAS CODE APPLICATIONS
FINAL PAPER QUESTIONS AND VERIFIED
ANSWERS
●● Which of the following statements is true?
A) workers do not have to wear hard hats on a job site, even if instructed
not to do so by employer
B) workers must wear the protective clothing that the employer instructs
them to wear on the job site
C) workers do not have to be aware of the contents of the occupational
health and safety act.
D) unnecessary running or rough or boisterous conduct on job sites is
NOT prohibited by the occupational health and safety actoisterous
conduct on job sites is NOT prohibited by the occupational health and
safety act
Answer: B) workers must wear the protective clothing that the employer
instructs them to wear on the job site.
●● 3. Which of the following is true:
A) when lifting, it is best to use your back muscles as they are the
strongest
B) when lifting, it is best to lift by bending your knees and using your
leg muscles
,C) when lifting a heavy load that is too heavy, lift and carry it short
distances at a time.
D) none of these statements apply
Answer: B) when lifting, it is best to lift by bending your knees and
using your leg muscles
●● Which of the following lists best describes the key safety categories
which should be considered by a fuel technician in Ontario:
A) personal safety, site, tools, equipment, safety of others, OHSA,
deadlines
B) personal safety, tools, equipment, safety of others, deadlines, Ontario
fuel code requirements
C) personal safety, tools, equipment, safety of others, site, OHSA,
Ontario fuel codes
D) personal safety, tools, equipment, safety of others, Ontario fuel codes
Answer: C) personal safety, tools, equipment, safety of others, site,
OHSA, Ontario fuel codes
●● 5. How often do portable fire extinguishers have to be inspected?
A) every month
B) every six months
C) every nine months
D) every twelve months
Answer: D) every twelve months
,●● 6. What does OSHA stand for?
A) Ontario health and standards act
B) Ontario health and safety act
C) occupational health and safety act
D) occupational health and standard ac
Answer: C) occupational health and safety act
●● 7. Technicians use MSDS sheets to:
A) be aware of flammable,corrosive, or explosive substances
B) know what materials are available for the technicians use
C) know the best brand of product to purchase
D) be aware of the best source of lubricants for machinery on site
Answer: A) be aware of flammable,corrosive, or explosive substances
●● 8.Which of the following phrases is true:
A). the natural gas and propane installation code requires a technician to
report a hazardous installation within three working days of completion
B) the OSHA requires that hazards be reported within 72 hours
C) the industry does not demand that hazards be reported for correction
D) the hazard is the responsibility of the person who is aware of it
Answer: D) the hazard is the responsibility of the person who is aware of
it
, ●● 9. Why should garbage and debris be removed from a job site:
A) to present a neat appearance
B) to prevent possible slips, trips or falls
C) to reduce the possibility of tool loss in debris
D) to reduce the likelihood of rodents on the job site
Answer: B) to prevent possible slips, trips or falls
●● 10. What should a fuel technician do when a new piece of equipment
is introduced for use:
A) carefully examine the equipment and determine how to use it
properly
B) ask the appliance owner to help determine how to use it properly
C) get a copy of the user's manual and read it before using the equipment
D) refuse to work with new equipment until someone else has used it.
Answer: C) get a copy of the user's manual and read it before using the
equipment
●● 11. Copper wire should be skinned with:
A) knife
B) pliers
C) side cutters
D) a wire stripper
FINAL PAPER QUESTIONS AND VERIFIED
ANSWERS
●● Which of the following statements is true?
A) workers do not have to wear hard hats on a job site, even if instructed
not to do so by employer
B) workers must wear the protective clothing that the employer instructs
them to wear on the job site
C) workers do not have to be aware of the contents of the occupational
health and safety act.
D) unnecessary running or rough or boisterous conduct on job sites is
NOT prohibited by the occupational health and safety actoisterous
conduct on job sites is NOT prohibited by the occupational health and
safety act
Answer: B) workers must wear the protective clothing that the employer
instructs them to wear on the job site.
●● 3. Which of the following is true:
A) when lifting, it is best to use your back muscles as they are the
strongest
B) when lifting, it is best to lift by bending your knees and using your
leg muscles
,C) when lifting a heavy load that is too heavy, lift and carry it short
distances at a time.
D) none of these statements apply
Answer: B) when lifting, it is best to lift by bending your knees and
using your leg muscles
●● Which of the following lists best describes the key safety categories
which should be considered by a fuel technician in Ontario:
A) personal safety, site, tools, equipment, safety of others, OHSA,
deadlines
B) personal safety, tools, equipment, safety of others, deadlines, Ontario
fuel code requirements
C) personal safety, tools, equipment, safety of others, site, OHSA,
Ontario fuel codes
D) personal safety, tools, equipment, safety of others, Ontario fuel codes
Answer: C) personal safety, tools, equipment, safety of others, site,
OHSA, Ontario fuel codes
●● 5. How often do portable fire extinguishers have to be inspected?
A) every month
B) every six months
C) every nine months
D) every twelve months
Answer: D) every twelve months
,●● 6. What does OSHA stand for?
A) Ontario health and standards act
B) Ontario health and safety act
C) occupational health and safety act
D) occupational health and standard ac
Answer: C) occupational health and safety act
●● 7. Technicians use MSDS sheets to:
A) be aware of flammable,corrosive, or explosive substances
B) know what materials are available for the technicians use
C) know the best brand of product to purchase
D) be aware of the best source of lubricants for machinery on site
Answer: A) be aware of flammable,corrosive, or explosive substances
●● 8.Which of the following phrases is true:
A). the natural gas and propane installation code requires a technician to
report a hazardous installation within three working days of completion
B) the OSHA requires that hazards be reported within 72 hours
C) the industry does not demand that hazards be reported for correction
D) the hazard is the responsibility of the person who is aware of it
Answer: D) the hazard is the responsibility of the person who is aware of
it
, ●● 9. Why should garbage and debris be removed from a job site:
A) to present a neat appearance
B) to prevent possible slips, trips or falls
C) to reduce the possibility of tool loss in debris
D) to reduce the likelihood of rodents on the job site
Answer: B) to prevent possible slips, trips or falls
●● 10. What should a fuel technician do when a new piece of equipment
is introduced for use:
A) carefully examine the equipment and determine how to use it
properly
B) ask the appliance owner to help determine how to use it properly
C) get a copy of the user's manual and read it before using the equipment
D) refuse to work with new equipment until someone else has used it.
Answer: C) get a copy of the user's manual and read it before using the
equipment
●● 11. Copper wire should be skinned with:
A) knife
B) pliers
C) side cutters
D) a wire stripper
