HOISTING AND RIGGING HAZARDS
ACTUAL EXAM PAPER 2026 QUESTIONS
AND SOLUTIONS GRADED A+
◉ Who is responsible for ensuring safety in hoisting and rigging
operations?
Answer: Both workers and management share the responsibility.
◉ What must major rigging operations be planned and supervised
by?
Answer: Competent personnel.
◉ What should all workers involved in hoisting and rigging be
trained in?
Answer: Safety and operating procedures.
◉ What is the Working Load Limit (WLL)?
Answer: The maximum load that equipment can safely lift.
◉ What should be done with defective components in rigging
equipment?
, Answer: Destroy them to prevent their use by others.
◉ What should be avoided during hoisting operations due to
hazardous conditions?
Answer: High winds and poor visibility.
◉ What is the minimum distance from power lines for cranes
operating at 750 to 150,000 volts?
Answer: 3 meters.
◉ What happens if the hoist line is not plumb during load handling?
Answer: It creates side loads that can destabilize the equipment and
cause structural failure.
◉ What factors can reduce the capacity of hoisting and rigging
equipment?
Answer: Swinging loads, condition of equipment, dynamic forces,
and weight of tackle.
◉ What should be done if equipment is damaged during service?
Answer: Take it out of service and repair or destroy it.
◉ What is the effect of rapid swinging of suspended loads?
ACTUAL EXAM PAPER 2026 QUESTIONS
AND SOLUTIONS GRADED A+
◉ Who is responsible for ensuring safety in hoisting and rigging
operations?
Answer: Both workers and management share the responsibility.
◉ What must major rigging operations be planned and supervised
by?
Answer: Competent personnel.
◉ What should all workers involved in hoisting and rigging be
trained in?
Answer: Safety and operating procedures.
◉ What is the Working Load Limit (WLL)?
Answer: The maximum load that equipment can safely lift.
◉ What should be done with defective components in rigging
equipment?
, Answer: Destroy them to prevent their use by others.
◉ What should be avoided during hoisting operations due to
hazardous conditions?
Answer: High winds and poor visibility.
◉ What is the minimum distance from power lines for cranes
operating at 750 to 150,000 volts?
Answer: 3 meters.
◉ What happens if the hoist line is not plumb during load handling?
Answer: It creates side loads that can destabilize the equipment and
cause structural failure.
◉ What factors can reduce the capacity of hoisting and rigging
equipment?
Answer: Swinging loads, condition of equipment, dynamic forces,
and weight of tackle.
◉ What should be done if equipment is damaged during service?
Answer: Take it out of service and repair or destroy it.
◉ What is the effect of rapid swinging of suspended loads?
