What must you do to configure a NAT instance after creating it?
Give this one a try later!
Disable the source/destination check on its ENI.
ENI Inbound rule elements
Give this one a try later!
- source
- protocol
- port range
,EC2 Cluster placement group
Give this one a try later!
A grouping that launches each associated EC2 instance within a single AZ
within close physical proximity to each other.
Direct Connect
Give this one a try later!
Bypass internet service providers in your network path using this feature.
You can procure rack space within the facility housing the feature server
location and deploy your equipment nearby. Once deployed, you can
connect this equipment to the feature using a cross-connect.
What is required to host a static website in S3
Give this one a try later!
Enable bucket hosting in the S3 service console
What is a NAT device?
Give this one a try later!
, - A device to enable instances in a private subnet to connect to the internet
(for example, for software updates) or other AWS services, but prevent the
internet from initiating connections with the instances.
- Are not supported for IPv6 traffic—use an egress-only Internet gateway
instead.
- performs port address translation (PAT)
Can you reassign a automatically assigned public IP
Give this one a try later!
No. When the EC2 instance that was given an automatically assigned IP is
stopped then the IP is lost.
Route 53 Health Checks
Give this one a try later!
Checks so see if the current route policy should route to each resources.
All health checks occur every 10 or 30 seconds.
Valid CIDR subnets
Give this one a try later!
Give this one a try later!
Disable the source/destination check on its ENI.
ENI Inbound rule elements
Give this one a try later!
- source
- protocol
- port range
,EC2 Cluster placement group
Give this one a try later!
A grouping that launches each associated EC2 instance within a single AZ
within close physical proximity to each other.
Direct Connect
Give this one a try later!
Bypass internet service providers in your network path using this feature.
You can procure rack space within the facility housing the feature server
location and deploy your equipment nearby. Once deployed, you can
connect this equipment to the feature using a cross-connect.
What is required to host a static website in S3
Give this one a try later!
Enable bucket hosting in the S3 service console
What is a NAT device?
Give this one a try later!
, - A device to enable instances in a private subnet to connect to the internet
(for example, for software updates) or other AWS services, but prevent the
internet from initiating connections with the instances.
- Are not supported for IPv6 traffic—use an egress-only Internet gateway
instead.
- performs port address translation (PAT)
Can you reassign a automatically assigned public IP
Give this one a try later!
No. When the EC2 instance that was given an automatically assigned IP is
stopped then the IP is lost.
Route 53 Health Checks
Give this one a try later!
Checks so see if the current route policy should route to each resources.
All health checks occur every 10 or 30 seconds.
Valid CIDR subnets
Give this one a try later!
