Texas Asbestos Certification
Comprehensive Resource To Help You Ace 2026-2027 Exams
Includes Frequently Tested Questions With ELABORATED
100% Correct COMPLETE SOLUTIONS
Guaranteed Pass First Attempt!! Current Update!!
Instant Download Pdf
1. What is the 'wet method' of asbestos abatement? - Correct Answer:
Wetting asbestos-containing material with 'amended water' to prevent fiber
release.
2. What is the 'glove-bag' method used for? - Correct Answer: Stripping
small sections of asbestos-containing material, typically on pipes.
3. What is the difference between enclosure and encapsulation in asbestos
abatement? - Correct Answer: Enclosure involves building airtight walls
around the material; encapsulation involves coating the material to seal in
fibers.
4. What is the fiber concentration limit that triggers an immediate work
stoppage for cleanup? - Correct Answer: 0.01 f/cc.
,5. What is 'aggressive air sampling' during clearance? - Correct Answer:
Using a leaf blower to stir up loose fibers before taking a final air
measurement.
6. What are the two primary education/experience paths to qualify for an
Individual Asbestos Consultant license? - Correct Answer: Option A:
Bachelor's degree + 2 years experience + 180 days work; Option B: 60
college credits + 3 years experience + 250 days work + recommendation
letter.
7. What type of insurance must an asbestos consultant maintain? - Correct
Answer: Professional Liability Insurance (Errors and Omissions).
8. What are the three main areas of authority for a licensed asbestos
consultant? - Correct Answer: Project design, surveys/plans, and
supervision.
9. Can a consultant delegate project monitoring tasks? - Correct Answer:
Yes, to a licensed Project Manager or AMT/PM, but the consultant remains
responsible for oversight.
10.What must be done to floor plastic sheeting to ensure proper containment?
- Correct Answer: It must extend at least 12 inches up the walls.
11.What is the required size and frequency for viewing windows in
containment? - Correct Answer: Approximately 18" x 18" for every 260
linear feet.
,12.Who must undergo individual respirator fit-testing? - Correct Answer:
All workers and supervisors.
13.What is the minimum PPE requirement for anyone entering a regulated
area? - Correct Answer: The same PPE required for the workers
performing the task.
14.What is the primary function of the shower room in the decon system? -
Correct Answer: To allow workers to shower with hot and cold water
before exiting to the clean room.
15.What is the role of the National Voluntary Laboratory Accreditation
Program (NVLAP) in asbestos testing? - Correct Answer: They accredit
laboratories to perform PLM analysis.
16.What are the five mandatory elements of an Asbestos Abatement Project
Design? - Correct Answer: Survey report review, selection of abatement
methods, detailed project layout, environmental controls/PPE, and
sampling rationale for final clearance.
17.What is the rule regarding the relationship between a project consultant
and the abatement contractor? - Correct Answer: A consultant or
agency cannot hire the abatement contractor for the same project.
, 18.Who must perform air monitoring for final clearance? - Correct Answer:
An independent third party.
19.What license is required to employ other consultants, inspectors, or
technicians? - Correct Answer: Asbestos Consultant Agency license.
20.What is the maximum allowable fiber concentration for re-occupancy after
abatement? - Correct Answer: 0.01 f/cc (fibers per cubic centimeter).
21.What is the purpose of Aggressive Air Sampling? - Correct Answer: To
stir up remaining fibers using a leaf blower before final testing to ensure the
area is safe.
22.Define 'Friable' in the context of asbestos. - Correct Answer: Material
that can be crumbled or reduced to powder by hand pressure when dry.
23.What is the primary difference between NIOSH 7400 and OSHA ID-
160/ORM? - Correct Answer: NIOSH 7400 is for general industry and
clearance, while OSHA ID-160/ORM is for worker exposure and legal
compliance.
24.What magnification is used for PCM analysis? - Correct Answer: 400x
magnification.
25.What are the counting criteria for a fiber in PCM analysis? - Correct
Answer: Length greater than 5 micrometers and a 3:1 aspect ratio.
Comprehensive Resource To Help You Ace 2026-2027 Exams
Includes Frequently Tested Questions With ELABORATED
100% Correct COMPLETE SOLUTIONS
Guaranteed Pass First Attempt!! Current Update!!
Instant Download Pdf
1. What is the 'wet method' of asbestos abatement? - Correct Answer:
Wetting asbestos-containing material with 'amended water' to prevent fiber
release.
2. What is the 'glove-bag' method used for? - Correct Answer: Stripping
small sections of asbestos-containing material, typically on pipes.
3. What is the difference between enclosure and encapsulation in asbestos
abatement? - Correct Answer: Enclosure involves building airtight walls
around the material; encapsulation involves coating the material to seal in
fibers.
4. What is the fiber concentration limit that triggers an immediate work
stoppage for cleanup? - Correct Answer: 0.01 f/cc.
,5. What is 'aggressive air sampling' during clearance? - Correct Answer:
Using a leaf blower to stir up loose fibers before taking a final air
measurement.
6. What are the two primary education/experience paths to qualify for an
Individual Asbestos Consultant license? - Correct Answer: Option A:
Bachelor's degree + 2 years experience + 180 days work; Option B: 60
college credits + 3 years experience + 250 days work + recommendation
letter.
7. What type of insurance must an asbestos consultant maintain? - Correct
Answer: Professional Liability Insurance (Errors and Omissions).
8. What are the three main areas of authority for a licensed asbestos
consultant? - Correct Answer: Project design, surveys/plans, and
supervision.
9. Can a consultant delegate project monitoring tasks? - Correct Answer:
Yes, to a licensed Project Manager or AMT/PM, but the consultant remains
responsible for oversight.
10.What must be done to floor plastic sheeting to ensure proper containment?
- Correct Answer: It must extend at least 12 inches up the walls.
11.What is the required size and frequency for viewing windows in
containment? - Correct Answer: Approximately 18" x 18" for every 260
linear feet.
,12.Who must undergo individual respirator fit-testing? - Correct Answer:
All workers and supervisors.
13.What is the minimum PPE requirement for anyone entering a regulated
area? - Correct Answer: The same PPE required for the workers
performing the task.
14.What is the primary function of the shower room in the decon system? -
Correct Answer: To allow workers to shower with hot and cold water
before exiting to the clean room.
15.What is the role of the National Voluntary Laboratory Accreditation
Program (NVLAP) in asbestos testing? - Correct Answer: They accredit
laboratories to perform PLM analysis.
16.What are the five mandatory elements of an Asbestos Abatement Project
Design? - Correct Answer: Survey report review, selection of abatement
methods, detailed project layout, environmental controls/PPE, and
sampling rationale for final clearance.
17.What is the rule regarding the relationship between a project consultant
and the abatement contractor? - Correct Answer: A consultant or
agency cannot hire the abatement contractor for the same project.
, 18.Who must perform air monitoring for final clearance? - Correct Answer:
An independent third party.
19.What license is required to employ other consultants, inspectors, or
technicians? - Correct Answer: Asbestos Consultant Agency license.
20.What is the maximum allowable fiber concentration for re-occupancy after
abatement? - Correct Answer: 0.01 f/cc (fibers per cubic centimeter).
21.What is the purpose of Aggressive Air Sampling? - Correct Answer: To
stir up remaining fibers using a leaf blower before final testing to ensure the
area is safe.
22.Define 'Friable' in the context of asbestos. - Correct Answer: Material
that can be crumbled or reduced to powder by hand pressure when dry.
23.What is the primary difference between NIOSH 7400 and OSHA ID-
160/ORM? - Correct Answer: NIOSH 7400 is for general industry and
clearance, while OSHA ID-160/ORM is for worker exposure and legal
compliance.
24.What magnification is used for PCM analysis? - Correct Answer: 400x
magnification.
25.What are the counting criteria for a fiber in PCM analysis? - Correct
Answer: Length greater than 5 micrometers and a 3:1 aspect ratio.
