FLAGGER ATSSA TEST 2026/2027
ACTUAL QUESTIONS WITH VERIFIED
ANSWERS.
Minimum heel height for climbing boots - correct answer-3/4 "
new, 1/2 " used
(5) Steps for ladder handling - correct answer--Preparation and
inspection -Move the ladder -Ladder setup -Ascending and
descending -Finish the job
Step that must be taken before moving ladder at any point -
correct answer-Walk your path
(5) Components of a pole inspection - correct answer--FVD -
Sound test -Prod test -Visual inspection -Rocking test
While hammer testing a pole, this range circumferentially
should be tested - correct answer-Ground to as high as can be
reached
,Under OSHA standards, bonds between the suspension strand
and the existing ground shall be at least this - correct answer-
No. 6 AWG copper
PCB - correct answer-polychlorinated biphenyls
Cancer-causing agent older transformers may contain - correct
answer-PCB (polychlorinated biphenyls)
The (2) times durring ladder handling when accidents are most
likely to occur - correct answer--On the way down -Within 10
feet of the ground
Instance when fall protection is necessary - correct answer-
Anytime working near an edge that is 6 feet or more above a
lower surface
(4) situations when OSHA requires the use of a 5-point safety
harness - correct answer--Bucket trucks -Climbing towers -
Rooftops -Confined Space
, Definiton of low slope roof - correct answer-A roof having a
slope less than or equal to 4:12
Definition of steep roof - correct answer-A roof having a slope
greater than 4:12
(3) Types of fall protection for unprotected side or edge -
correct answer--Guardrail system (toe boards for steep roof) -
Safety net system -Personal fall arrest system
Required fall protection for low slope roof less than 50 ft width -
correct answer-Safety monitoring system
(4) Required fall protection devices for low slope roof greater
than 50 ft width - correct answer--Guardrail -Safety net -
Personal fall arrest system -Warning line
Minimum height of guardrail - correct answer-Between 39'' and
45''
ACTUAL QUESTIONS WITH VERIFIED
ANSWERS.
Minimum heel height for climbing boots - correct answer-3/4 "
new, 1/2 " used
(5) Steps for ladder handling - correct answer--Preparation and
inspection -Move the ladder -Ladder setup -Ascending and
descending -Finish the job
Step that must be taken before moving ladder at any point -
correct answer-Walk your path
(5) Components of a pole inspection - correct answer--FVD -
Sound test -Prod test -Visual inspection -Rocking test
While hammer testing a pole, this range circumferentially
should be tested - correct answer-Ground to as high as can be
reached
,Under OSHA standards, bonds between the suspension strand
and the existing ground shall be at least this - correct answer-
No. 6 AWG copper
PCB - correct answer-polychlorinated biphenyls
Cancer-causing agent older transformers may contain - correct
answer-PCB (polychlorinated biphenyls)
The (2) times durring ladder handling when accidents are most
likely to occur - correct answer--On the way down -Within 10
feet of the ground
Instance when fall protection is necessary - correct answer-
Anytime working near an edge that is 6 feet or more above a
lower surface
(4) situations when OSHA requires the use of a 5-point safety
harness - correct answer--Bucket trucks -Climbing towers -
Rooftops -Confined Space
, Definiton of low slope roof - correct answer-A roof having a
slope less than or equal to 4:12
Definition of steep roof - correct answer-A roof having a slope
greater than 4:12
(3) Types of fall protection for unprotected side or edge -
correct answer--Guardrail system (toe boards for steep roof) -
Safety net system -Personal fall arrest system
Required fall protection for low slope roof less than 50 ft width -
correct answer-Safety monitoring system
(4) Required fall protection devices for low slope roof greater
than 50 ft width - correct answer--Guardrail -Safety net -
Personal fall arrest system -Warning line
Minimum height of guardrail - correct answer-Between 39'' and
45''
