1|Page
CNMI Scaffolding Technician Certification Exam
Practice Questions And Correct Answers||Verified
Exam!!|| (Verified Answers) Plus Rationales 2026/2027
Q&A | Instant Download Pdf
At what height do employers have to provide fall protection
on a scaffold above a lower level ? - Answer-10 feet
What ways can employer provide fall protection? -
Answer-Guardrail and personal fall arrest systems
What are the five most serious scaffold hazards ? -
Answer-Falls , unsafe access , falling objects , scaffold
collapse, electrocution
Top rail must be between ________ high and withstand a
200 lbs force - Answer-38-45
The midrail must be installed midway between ? - Answer-
the top edge and the platform
A toeboard when used must be how many inches ? -
Answer-3 1/2 inches
,2|Page
What can be substituted for toeboards substitute at the
base of scaffolds ? - Answer-barricades
Who trains employees that work on scaffolds? - Answer-
Employer-designated competent person
Scaffolds must be designed by a ___. - Answer-qualified
person
Which of the following is NOT an example of proper
access?
a.Ladders
b.Cross braces
c.Stair towers
d.Walkways - Answer-Cross braces
Footing - Answer-supports the load without settling or
displacement
-level
-sound
, 3|Page
-rigid
Platform Specifications - Answer--Each working level fully
planked no more than 1" gaps
-Min platform and walkway width of 18 inches
- DON'T PAINT OVER PLANKS
- Front edge within 14 of the work, or guard rails or fall
protection must be used
Tie offs - Answer-if the ratio of the height to base is more
than 4:1
Competent person - Answer-•Oversees assembly,
disassembly, inspection, and safe use of scaffolds
•Trains all employees who erect, disassemble, move,
operate, repair, maintain, inspect, or work on scaffolds
Process for designating an employee as the competent
person: - Answer--Employer appointed
-Capability to identify hazards
-Executes qualified person design
-Authority to take prompt corrective action
CNMI Scaffolding Technician Certification Exam
Practice Questions And Correct Answers||Verified
Exam!!|| (Verified Answers) Plus Rationales 2026/2027
Q&A | Instant Download Pdf
At what height do employers have to provide fall protection
on a scaffold above a lower level ? - Answer-10 feet
What ways can employer provide fall protection? -
Answer-Guardrail and personal fall arrest systems
What are the five most serious scaffold hazards ? -
Answer-Falls , unsafe access , falling objects , scaffold
collapse, electrocution
Top rail must be between ________ high and withstand a
200 lbs force - Answer-38-45
The midrail must be installed midway between ? - Answer-
the top edge and the platform
A toeboard when used must be how many inches ? -
Answer-3 1/2 inches
,2|Page
What can be substituted for toeboards substitute at the
base of scaffolds ? - Answer-barricades
Who trains employees that work on scaffolds? - Answer-
Employer-designated competent person
Scaffolds must be designed by a ___. - Answer-qualified
person
Which of the following is NOT an example of proper
access?
a.Ladders
b.Cross braces
c.Stair towers
d.Walkways - Answer-Cross braces
Footing - Answer-supports the load without settling or
displacement
-level
-sound
, 3|Page
-rigid
Platform Specifications - Answer--Each working level fully
planked no more than 1" gaps
-Min platform and walkway width of 18 inches
- DON'T PAINT OVER PLANKS
- Front edge within 14 of the work, or guard rails or fall
protection must be used
Tie offs - Answer-if the ratio of the height to base is more
than 4:1
Competent person - Answer-•Oversees assembly,
disassembly, inspection, and safe use of scaffolds
•Trains all employees who erect, disassemble, move,
operate, repair, maintain, inspect, or work on scaffolds
Process for designating an employee as the competent
person: - Answer--Employer appointed
-Capability to identify hazards
-Executes qualified person design
-Authority to take prompt corrective action
