SNSP Exam - Best Practices and other Basics
Questions With Correct Answers
Which interfaces cannot be configured as WAN interfaces - CORRECT
| | | | | | | | | |
ANSWER✔✔-X0 and MGMT | |
What is the default configuration of X1 - CORRECT ANSWER✔✔-Static
| | | | | | | | | |
mode with IP of 0.0.0.0
| | | |
To avoid routing issues of X1 what should you ensure - CORRECT
| | | | | | | | | | | |
ANSWER✔✔-It's assigned with a valid non-zero IP address or | | | | | | | | |
configuring for DHCP or PPPoE | | | |
True or False: It is recommended to disassociate the from the WAN zone
| | | | | | | | | | | |
if not in use - CORRECT ANSWER✔✔-True - Unassigned
| | | | | | | | |
True or False: You should open HTTPS Mgmt up on the WAN interface -
| | | | | | | | | | | | | |
CORRECT ANSWER✔✔-False |
True or False: Check the "Add rule to enable redirect from HTTP to
| | | | | | | | | | | | |
HTTPS" option when configuring HTTPM management - CORRECT
| | | | | | | |
ANSWER✔✔-False
, What can result from incorrect duplex settings on the WAN - CORRECT
| | | | | | | | | | | |
ANSWER✔✔-Inconsistent Internet connection, slow throughput, | | | | |
dropped packets, and inability to negotiate to an ISP connection
| | | | | | | | |
What settings are default on the advanced tab of a WAN interface -
| | | | | | | | | | | | |
CORRECT ANSWER✔✔-Link Speed to Auto Negotiate
| | | | |
User Default MAC address
| | |
Enable Flow Reporting | |
Fragment non-VPN outbound packets larger than this Interfaces MTU
| | | | | | | |
MTU stands for what - CORRECT ANSWER✔✔-Maximum Transmission
| | | | | | | |
Unit
On DSL and cable connections is the MTU size generally lower or higher
| | | | | | | | | | | |
- CORRECT ANSWER✔✔-Lower
| | |
How do you change the value of MTU - CORRECT ANSWER✔✔-In
| | | | | | | | | | |
increments of 8 bytes | | |
True or False: Confirm that Ignore Don't Fragment DF bit is unchecked -
| | | | | | | | | | | | |
CORRECT ANSWER✔✔-True |
Questions With Correct Answers
Which interfaces cannot be configured as WAN interfaces - CORRECT
| | | | | | | | | |
ANSWER✔✔-X0 and MGMT | |
What is the default configuration of X1 - CORRECT ANSWER✔✔-Static
| | | | | | | | | |
mode with IP of 0.0.0.0
| | | |
To avoid routing issues of X1 what should you ensure - CORRECT
| | | | | | | | | | | |
ANSWER✔✔-It's assigned with a valid non-zero IP address or | | | | | | | | |
configuring for DHCP or PPPoE | | | |
True or False: It is recommended to disassociate the from the WAN zone
| | | | | | | | | | | |
if not in use - CORRECT ANSWER✔✔-True - Unassigned
| | | | | | | | |
True or False: You should open HTTPS Mgmt up on the WAN interface -
| | | | | | | | | | | | | |
CORRECT ANSWER✔✔-False |
True or False: Check the "Add rule to enable redirect from HTTP to
| | | | | | | | | | | | |
HTTPS" option when configuring HTTPM management - CORRECT
| | | | | | | |
ANSWER✔✔-False
, What can result from incorrect duplex settings on the WAN - CORRECT
| | | | | | | | | | | |
ANSWER✔✔-Inconsistent Internet connection, slow throughput, | | | | |
dropped packets, and inability to negotiate to an ISP connection
| | | | | | | | |
What settings are default on the advanced tab of a WAN interface -
| | | | | | | | | | | | |
CORRECT ANSWER✔✔-Link Speed to Auto Negotiate
| | | | |
User Default MAC address
| | |
Enable Flow Reporting | |
Fragment non-VPN outbound packets larger than this Interfaces MTU
| | | | | | | |
MTU stands for what - CORRECT ANSWER✔✔-Maximum Transmission
| | | | | | | |
Unit
On DSL and cable connections is the MTU size generally lower or higher
| | | | | | | | | | | |
- CORRECT ANSWER✔✔-Lower
| | |
How do you change the value of MTU - CORRECT ANSWER✔✔-In
| | | | | | | | | | |
increments of 8 bytes | | |
True or False: Confirm that Ignore Don't Fragment DF bit is unchecked -
| | | | | | | | | | | | |
CORRECT ANSWER✔✔-True |
