Comprehensive Resource To Help You Ace 2026-2027
Exams Includes Frequently Tested Questions With
ELABORATED 100% Correct COMPLETE SOLUTIONS
Guaranteed Pass First Attempt!! Current Update!!
Instant Download Pdf
1. The reagent commonly used to test PH is:
(A) DPD
(B) Sodium Thiosulfate
(C) Coolomatic
(D) Phenol red - Correct Answer: (D) Phenol red
2. When should you backwash high rate sand filters that have a single
pressure gauge?
(A) After an 8 to 10 psi increase above starting pressure
(B) Every 2 days
(C) Once per week
(D) When the influent and effluent gauges are 10 to 20 psi apart -
Correct Answer: (A) After an 8 to 10 psi increase above starting
pressure
3. Oxidation Reduction Potential testing (ORP) is measured in:
(A) Parts per million (ppm)
(B) Millivolts (mV)
(C) Gallons per minute (gpm)
(D) Free available chlorine (FAC) - Correct Answer: (B) Millivolts (mV)
, 4. How much sodium thiosulfate would you need to lower the free chlorine
from 18 ppm to 2.0 ppm in a 150,000 gallon pool?
(A) 35 lbs.
(B) 30 lbs.
(C) 25 lbs.
(D) 39 lbs. - Correct Answer: (D) 39 lbs.
5. Evaporation heat losses from a pool are highest under which environmental
condition?
(A) High relative humidity
(B) Low relative humidity
(C) Clear sky
(D) Low barometric pressure - Correct Answer: (B) Low relative
humidity
6. The daily opening checklist should be used to:
(A) Check the design of the facility
(B) Ensure all safety equipment is in place
(C) Check that all ground wires are properly connected
(D) Ensure the heater is properly sized - Correct Answer: (B) Ensure
all safety equipment is in place
7. You have a 25,000 gallon hotel pool with a calcium hardness level of 170
ppm. How much calcium chloride (77%) would be required to increase this
to 250 ppm?
(A) 20 lbs.
(B) 25 lbs.
(C) 18 lbs.