LADOTD PCC Pavement Inspection | questions
and answers | latest update
Save
Terms in this set (114)
Quality assurance requirements Application of Quality Assurance Specifications for
shall be as specified in the PCC Pavement
applicable edition of the
department's publication entitled:
Quality control of pavement is the the contractor
responsibility of...
PCC Concrete production and Section 601 & 901
pavement construction must
conform to which sections of the
department specs?
The method of paving that uses Slip form method
mobile side forms
the method of paving that uses Conventional method
stationary forms
Performs QC testing including Authorized Concrete Field Tester
measuring slump & air content,
making cylinders, taking
temperature of concrete, and
adjusting water at the job site
, The schedule formulated by the The Sampling Plan
DOTD Inspector and the district
laboratory engineer outlining the
minimal sampling and testing
frequency for all materials used on a
project
To compare the plans and field Purpose of on site inspection prior to paving
conditions to determine if there are
any discrepancies, and to check
equipment to be used on the project
Who should the DOTD Certified The Project Engineer
Inspector is to notify if discrepancies
are found during the on site
inspection?
The minimal sampling frequency The Materials Sampling Manual
by section and material can be
found where?
The document submitted by the PCC Plant Report
contractor for acceptance by the
district laboratory engineer that
indicates the intended source of
materials and the mix design to be
used on the project
Establishes lots prior to beginning District Laboratory Engineer
concrete placement operations
and answers | latest update
Save
Terms in this set (114)
Quality assurance requirements Application of Quality Assurance Specifications for
shall be as specified in the PCC Pavement
applicable edition of the
department's publication entitled:
Quality control of pavement is the the contractor
responsibility of...
PCC Concrete production and Section 601 & 901
pavement construction must
conform to which sections of the
department specs?
The method of paving that uses Slip form method
mobile side forms
the method of paving that uses Conventional method
stationary forms
Performs QC testing including Authorized Concrete Field Tester
measuring slump & air content,
making cylinders, taking
temperature of concrete, and
adjusting water at the job site
, The schedule formulated by the The Sampling Plan
DOTD Inspector and the district
laboratory engineer outlining the
minimal sampling and testing
frequency for all materials used on a
project
To compare the plans and field Purpose of on site inspection prior to paving
conditions to determine if there are
any discrepancies, and to check
equipment to be used on the project
Who should the DOTD Certified The Project Engineer
Inspector is to notify if discrepancies
are found during the on site
inspection?
The minimal sampling frequency The Materials Sampling Manual
by section and material can be
found where?
The document submitted by the PCC Plant Report
contractor for acceptance by the
district laboratory engineer that
indicates the intended source of
materials and the mix design to be
used on the project
Establishes lots prior to beginning District Laboratory Engineer
concrete placement operations
