With film screen imaging, increasing the kVp results in an image with ______ density and
______ contrast.
Give this one a try later!
increased; lower
When a film image is too light, it has ______ density, and would require a(n) ______ in mAs
by 2 on repeat to obtain a diagnostic image.
Give this one a try later!
insufficient; increase
, In order to reduce patient exposure, _____ kVp and _____ mAs should be used when
possible.
Give this one a try later!
higher; lower
The relationship between distance and x-ray beam intensity, specifically that the
intensity of the x-ray beam is inversely proportional to the square of the distance from
the source, is the:
Give this one a try later!
inverse square law
What effect does the level of mAs have on image brightness when using digital image
receptors?
Give this one a try later!
increases
As compared to a patient with a 24 cm thick abdomen, imaging a patient with a 20 cm
thick abdomen will result in _____ scatter being produced and _____ image contrast
Give this one a try later!
______ contrast.
Give this one a try later!
increased; lower
When a film image is too light, it has ______ density, and would require a(n) ______ in mAs
by 2 on repeat to obtain a diagnostic image.
Give this one a try later!
insufficient; increase
, In order to reduce patient exposure, _____ kVp and _____ mAs should be used when
possible.
Give this one a try later!
higher; lower
The relationship between distance and x-ray beam intensity, specifically that the
intensity of the x-ray beam is inversely proportional to the square of the distance from
the source, is the:
Give this one a try later!
inverse square law
What effect does the level of mAs have on image brightness when using digital image
receptors?
Give this one a try later!
increases
As compared to a patient with a 24 cm thick abdomen, imaging a patient with a 20 cm
thick abdomen will result in _____ scatter being produced and _____ image contrast
Give this one a try later!
