IFSTA DRIVER OPERATOR QUESTIONS AND ANSWERS (2026/2027) (VERIFIED ANSWERS)
The main purpose of fire department pumpers is to ✔️Provide adequate water pressure for effective fire streams- pg. 13*
According to NFPA 1901, fire department pumpers should have a minimum pump capacity of ✔️750 gpm- pg. 14
According to NFPA 1901, fire department pumpers should have a water tank capacity of at least ✔️300 gallons- pg. 14*
What NFPA standard specifies minimum portable equipment that must be carried on all pumpers ✔️NFPA 1901- pg. 14*
Which statement about fire department pumpers and foam capability is MOST ACCURATE ✔️Many fire departments operate pumpers capable
of discharging foam on Class A and/ or Class B fires- pg. 15
Foam tanks on municipal fire pumpers are often designed to be refilled ✔️Directly from 5-gallon containers- pg. 16*
What term is often used to define pumping apparatus smaller than a full-size pumper ✔️Mini pumper- pg. 16
Which statement about initial attack fire apparatus is MOST accurate ✔️They may be highly maneuverable and are able to respond to incidents
where access is limited- pg. 16*
What is the function of mobile water supply apparatus ✔️Transport water to areas where a water system is nonexistent or inadequate- pg. 17*
According to NFPA 1901, mobile water supply apparatus must be equipped with a tank capacity of at least ✔️1,000 gallons- pg. 17
Which factor involves taking into consideration the capability of nearby jurisdictions when determining capacity of mobile water supply
apparatus ✔️Interoperability- pg. 17*
When a mobile water supply apparatus is used as a stationary reservoir or "nurse tender", the ✔️Pumpers connect to the water tender and use
its supply during suppression operations- pg. 18*
When a mobile water supply apparatus is parked in close proximity to the fire scene and pumpers are using its supply during suppression opps,
the water tender is being used ✔️As a stationary reservoir or nurse tender- pg. 18*
When a mobile water supply apparatus uses a quick dump valve to off load its water supply into folding portable water tanks, the water tender
is being used ✔️In a mobile shuttle operation- pg. 18
Which is a safety and efficiency requirement that should be met by mobile water supply apparatus ✔️Suspension and steering matched to
terrain requirements- pg. 18
Pump and roll pumps as in a wildland situation ✔️"PTO"- pg.19*
Which specialty apparatus is MOST likely to be equipped with ground sweep nozzles for fire suppression ✔️Wildland fire apparatus- pg. 19
Which type of apparatus is often divided into three general categories; major fire fighting vehicles, rapid intervention vehicles, and combined
agent vehicles ✔️Aircraft rescue and fire apparatus- pg. 20
Which specialty apparatus is MOST likely to be used to provide immediate suppression of flammable liquid fires and suppression of vapors from
fuel spills on airport property ✔️Aircraft rescue and firefighting apparatus- pg. 20*
Which consideration would MOST likely be taken into account when positioning an aerial apparatus with fire pumps ✔️Reach of the aerial
device- pg. 21
Which apparatus are MOST likely to be used for ice rescue ✔️Fireboats- pg. 21
Which apparatus is often designed with pump panel and one or more preconnected hose lines housed in compartment ✔️Rescue apparatus
equipped with fire pumps- pg. 22
Which specialty fire apparatus is equipped with small fire pumps and tanks to extinguish small fires and provide protective hose lines at
incidents ✔️Rescue apparatus equipped with fire pumps- pg. 22*
A trailer- mounted fire pump would be MOST likely to be deployed to fires ✔️At long-term pumping operations- pg. 22*
Which equipment is MOST likely to be used when a small amount of power is needed near the vehicle ✔️Inverter- pg. 23*
,Which equipment converts a vehicle's 12- or 24-volt DC current into 110- or 220-volt AC current ✔️Inverter- pg. 23*
Which equipment is powered by gasoline, diesel, PTO, or hydraulic system ✔️Vehicle mounted generator- pg. 23
Which equipment is powered by small gasoline or diesel engines, generally has 110 and/ or 220-volt capability, and is available with power
capacities up to 5,000 watts ✔️Portable generator- pg. 23
Which electric power generation equipment may be operated in the compartment of an apparatus or carried to a remote location ✔️Portable
generator- pg. 23*
Which equipment is useful when remote power is needed away from the apparatus ✔️Portable generator- pg. 23
Which statement about apparatus mounted generators with separate engines is MOST accurate ✔️They may create noisy work environments
making communication difficult- pg. 23
Which type of light ranges from 300 to 1,000 watts and is advantageous where illumination is needed away from the apparatus ✔️Portable
lights- pg. 23-24
Which type of light provides general lighting for the scene and is often mounted so that it may be raised, lowered, or turned to provide the best
possible lighting ✔️Fixed lights- pg. 24
Which is the MOST likely reasons that a fire department would use heavy duty electrical cords ✔️Cords provide greater abrasion protection on
the fire ground- pg. 24*
Which equipment allows rescuers to plug their equipment into standard electrical outlets ✔️Adapters- pg. 24
Which equipment is used to supply power to several connections from one supply source ✔️Junction boxes- pg. 24
Certified mechanics perform ✔️complex maintenance- pg.30*
Which would be an appropriate option for a systematic maintenance program ✔️Contract out repair work- pg. 30
Standard operating procedures (SOPs) for a systematic maintenance program should specify maintenance procedures, when they are
performed, and ✔️Who is responsible- pg. 30
Which statement about the driver/ operator and maintenance responsibilities is MOST accurate ✔️The driver/ operator is often able to correct
minor deficiencies- pg. 30*
In which situation must immediate action be taken on apparatus maintenance and inspection issues ✔️For serious issues or items meeting the
NFPA 1911 "out of service" criteria- pg. 31*
NFPA 1002 allow D/O to perform ✔️routine test, inspection, services- pg. 30-39*
What should a D/O do when a piece of equipment onboard is found broken, defective, or in need of any type of repair ✔️Follow the established
policy of the AHJ for documenting, reporting, and following up on status of repair- pg. 31
Why should a driver/ operator use an inspection checklist ✔️Ensures the driver/ operator conducts a uniform and complete inspection- pg. 31*
1st steps when finding problem during rig checks ✔️follow order of AHJ1) document2) reporting 3) following up on status of repair- pg. 31*
Which component in a load management system will shut down less important electrical systems if an overload condition occurs ✔️Load
monitor- pg. 31
Which is a function of apparatus maintenance and inspection records ✔️In a warranty claim, may be needed to document required maintenance
was performed- pg.31
What is an adverse effect to over cleaning fire apparatus ✔️May remove lubrication from the chassis, engine, pump and underbody- pg. 32*
Which of the following statements about vehicle cleanliness is MOST accurate ✔️Proper inspection of apparatus is easier when parts are free of
dirt and grime- pg. 32*
The engine compartment where linkages, fuel injectors, or other controls are located ✔️May become inoperable due to the collection of dirt-
pg. 32
,What should be done during the 6 months after an apparatus is received ✔️Wash frequently using cold water- pg. 33*
What should be used to clean automotive glass ✔️Commercial glass cleaner in conjunction with a clean cloth rag- pg. 34
Before using any waxes or polishes on a fire apparatus ✔️reference the manufacturer's manual- pg. 35*
When cleaning the interior of an apparatus using cleaning agents ✔️Ventilate the cab or crew riding area- pg. 35
When conducting a walk around inspection, who should the D/O talk to in order to get the MOST accurate impression of how the vehicle last
operated ✔️Last person to drive apparatus- pg. 36
Walk around method starts at pg.36* ✔️driver's door then clockwise around the vehicle-
Walk around method of rig checks ✔️Operational readiness check & pre trip road worthiness- pg. 36*
Which statement about inspecting a parked apparatus is MOST accurate ✔️Whenever an apparatus is parked, chock its wheels- pg. 37*
Which statement about tire types and condition is MOST accurate ✔️All tires should be the same size and weight ratings according to
appropriate manufacturer specifications- pg. 38 **
Tire selection for fire apparatus is based on ✔️Gross axle weight ratings for the apparatus- pg. 38*
When examining tire condition ✔️cupping, cuts, dry rot and cracking- pg. 39*
According to NFPA 1911, tires must be replaced every ✔️7 years- pg. 39*
When examining tire condition, driver/ operator should check ✔️excessive wear on the sidewalls- pg. 39*
Load management ✔️Electrical system that prevents overload of electrical generation system- pg. 40*
The component in a load management system that turns on various lights at specified intervals so the startup electrical load for all devices does
not occur at the same time is called the ✔️Load sequencer- pg. 40 *
Which component in a load management system will shut down less important electrical equipment systems if an overload condition occurs
✔️Load monitor- pg. 40
The Gross vehicle weight rating (GVWR) is the ✔️maximum weight at which a vehicle can be safely operated on roadways in ideal conditions- pg.
41*
Wheel play ✔️should be no more than 10 degrees in either direction. 20" wheel=2" of play- pg.41**
In a manual transmission, excessive free play of the pedal may ✔️Result in the clutch not releasing completely- pg. 41
Apparatus with air brakes are to be equipped with an air pressure protection valve that prevents air horns or other nonessential devices from
being operated when the pressure in the air reservoir drops below ✔️80 psi- pg. 43*
On apparatus equipped with air brakes, if the engine must be run longer than the specified period of time to build sufficient air pressure ✔️The
apparatus should be inspected and repaired by a certified mechanic- pg. 43
How often should apparatus brakes be thoroughly tested ✔️Annually- pg. 43*
Which NFPA standard specifies method for the brake tests ✔️NFPA 1911- pg. 43
Abs brakes reduce possibility of ✔️sliding, jackknifing, or spin during heavy braking- pg. 43*
What is a function of antilock braking systems (ABS) ✔️Assists the D/O in keeping apparatus in a straight trajectory during heavy or emergency
braking- pg. 43
Slack adjusters ✔️device used in air brakes that compensate from brake pad wear- pg.43**
Which statement about checking fluid levels is MOST accurate ✔️Never rely solely on warning lights or gauges; all fluid levels should be
inspected- pg. 44
Engines produced after 01-01-10 may be equipped with an exhaust after treatment system called selective catalyst reductant that ✔️uses DEF
to help further reduce emissions- pg. 45
, What is the function of diesel particulate filters (DPF) ✔️Provide for cleaner emissions from diesel engines- pg. 45
Older batteries may require ✔️adding distilled water to replenish cell fluid- pg.46*
When checking vehicle batteries, D/O should check that cable connections are tight and protected with ✔️A film of grease, petroleum jelly, or
battery terminal protection product- pg. 46
Most modern truck batteries ✔️Are maintenance free- pg. 46
When performing chassis lubrication, the manufacturer's manual will recommend the ✔️Society of Automotive Engineers (SAE) numbers for
engine oil- pg. 46
What type of highly explosive gas can batteries give off ✔️Hydrogen gas- pg. 47*
Fire pumps are tested at regularly scheduled intervals to compare actual performance to ✔️Specific Standards- pg. 48
Which statement about inspections to detect deficiencies or failure of the fire pump or other fire suppression equipment is most accurate
✔️Some items should be checked daily, but other checks may be performed weekly- pg. 48*
Which of the following statements about inspecting apparatus fire pumps is MOST accurate ✔️Some items should be checked daily, but other
checks may be performed weekly- pg. 48*
When is a post trip inspection conducted ✔️After the apparatus has been operated for an extended period of time- pg. 48*
When jump starting a vehicle, the vehicle being used as the power source must have the same voltage as the app being jump started in order to
✔️prevent damage from occurring to either system- pg. 48* (not to provide enough power)
NFPA 1002 allow D/O to perform ✔️routine test, inspections, services- pg. 50-59*
Which statement about driver/ operator training is accurate ✔️All fire departments must establish and maintain a thorough training program-
pg. 80
D/O must have basic computer skills in order to ✔️access and operate on-line mapping software and dispatch instructions- pg. 81
Which skill or ability is needed to connect an intake hose to a hydrant ✔️Physical fitness- pg. 82
In the United States, basic requirements for licensing a driver are established by the ✔️Department of Transportation (DOT)- pg. 82
Which of the following statements about driving regulations is MOST accurate ✔️D/O are subject to all traffic regulations under nonemergency
conditions- pg. 83
Which statement about states/ provinces and driver/ operator regulations is MOST accurate ✔️States or provinces have latitude to alter federal
requirements as necessary- pg. 83*
D/O are subject to any statute, rule, regulation, or ordinance that governs any other vehicle operator ✔️Unless specifically exempt- pg. 83
Negligence ✔️usually found when driver operator violates standing laws/ policies- pg.84*
Which statement about the driver/ operator and organization in civil or criminal cases is MOST accurate ✔️Both the D/O and organization can
be held responsible- pg. 84
Which is the most common place for accidents to occur ✔️Intersections- pg. 85*
Which action would MOST likely be considered reckless when driving an apparatus ✔️Failing to yield to other responding emergency vehicles-
pg. 86
What generally accounts for a significant percentage of all damage repair costs for a fire department ✔️Backing accidents- pg. 86*
What must driver/ operators complete before being allowed to drive under emergency conditions ✔️A thorough training program- Pg. 87
Manufactures recommend ✔️either a completely full or completely empty water tank is safest- pg. 88*
"Home built" apparatus that are built/ designed by FD members, local mechanics and ✔️are more likely to be too heavy (GVW), of poor design
and are to top heavy- pg. 89*
The main purpose of fire department pumpers is to ✔️Provide adequate water pressure for effective fire streams- pg. 13*
According to NFPA 1901, fire department pumpers should have a minimum pump capacity of ✔️750 gpm- pg. 14
According to NFPA 1901, fire department pumpers should have a water tank capacity of at least ✔️300 gallons- pg. 14*
What NFPA standard specifies minimum portable equipment that must be carried on all pumpers ✔️NFPA 1901- pg. 14*
Which statement about fire department pumpers and foam capability is MOST ACCURATE ✔️Many fire departments operate pumpers capable
of discharging foam on Class A and/ or Class B fires- pg. 15
Foam tanks on municipal fire pumpers are often designed to be refilled ✔️Directly from 5-gallon containers- pg. 16*
What term is often used to define pumping apparatus smaller than a full-size pumper ✔️Mini pumper- pg. 16
Which statement about initial attack fire apparatus is MOST accurate ✔️They may be highly maneuverable and are able to respond to incidents
where access is limited- pg. 16*
What is the function of mobile water supply apparatus ✔️Transport water to areas where a water system is nonexistent or inadequate- pg. 17*
According to NFPA 1901, mobile water supply apparatus must be equipped with a tank capacity of at least ✔️1,000 gallons- pg. 17
Which factor involves taking into consideration the capability of nearby jurisdictions when determining capacity of mobile water supply
apparatus ✔️Interoperability- pg. 17*
When a mobile water supply apparatus is used as a stationary reservoir or "nurse tender", the ✔️Pumpers connect to the water tender and use
its supply during suppression operations- pg. 18*
When a mobile water supply apparatus is parked in close proximity to the fire scene and pumpers are using its supply during suppression opps,
the water tender is being used ✔️As a stationary reservoir or nurse tender- pg. 18*
When a mobile water supply apparatus uses a quick dump valve to off load its water supply into folding portable water tanks, the water tender
is being used ✔️In a mobile shuttle operation- pg. 18
Which is a safety and efficiency requirement that should be met by mobile water supply apparatus ✔️Suspension and steering matched to
terrain requirements- pg. 18
Pump and roll pumps as in a wildland situation ✔️"PTO"- pg.19*
Which specialty apparatus is MOST likely to be equipped with ground sweep nozzles for fire suppression ✔️Wildland fire apparatus- pg. 19
Which type of apparatus is often divided into three general categories; major fire fighting vehicles, rapid intervention vehicles, and combined
agent vehicles ✔️Aircraft rescue and fire apparatus- pg. 20
Which specialty apparatus is MOST likely to be used to provide immediate suppression of flammable liquid fires and suppression of vapors from
fuel spills on airport property ✔️Aircraft rescue and firefighting apparatus- pg. 20*
Which consideration would MOST likely be taken into account when positioning an aerial apparatus with fire pumps ✔️Reach of the aerial
device- pg. 21
Which apparatus are MOST likely to be used for ice rescue ✔️Fireboats- pg. 21
Which apparatus is often designed with pump panel and one or more preconnected hose lines housed in compartment ✔️Rescue apparatus
equipped with fire pumps- pg. 22
Which specialty fire apparatus is equipped with small fire pumps and tanks to extinguish small fires and provide protective hose lines at
incidents ✔️Rescue apparatus equipped with fire pumps- pg. 22*
A trailer- mounted fire pump would be MOST likely to be deployed to fires ✔️At long-term pumping operations- pg. 22*
Which equipment is MOST likely to be used when a small amount of power is needed near the vehicle ✔️Inverter- pg. 23*
,Which equipment converts a vehicle's 12- or 24-volt DC current into 110- or 220-volt AC current ✔️Inverter- pg. 23*
Which equipment is powered by gasoline, diesel, PTO, or hydraulic system ✔️Vehicle mounted generator- pg. 23
Which equipment is powered by small gasoline or diesel engines, generally has 110 and/ or 220-volt capability, and is available with power
capacities up to 5,000 watts ✔️Portable generator- pg. 23
Which electric power generation equipment may be operated in the compartment of an apparatus or carried to a remote location ✔️Portable
generator- pg. 23*
Which equipment is useful when remote power is needed away from the apparatus ✔️Portable generator- pg. 23
Which statement about apparatus mounted generators with separate engines is MOST accurate ✔️They may create noisy work environments
making communication difficult- pg. 23
Which type of light ranges from 300 to 1,000 watts and is advantageous where illumination is needed away from the apparatus ✔️Portable
lights- pg. 23-24
Which type of light provides general lighting for the scene and is often mounted so that it may be raised, lowered, or turned to provide the best
possible lighting ✔️Fixed lights- pg. 24
Which is the MOST likely reasons that a fire department would use heavy duty electrical cords ✔️Cords provide greater abrasion protection on
the fire ground- pg. 24*
Which equipment allows rescuers to plug their equipment into standard electrical outlets ✔️Adapters- pg. 24
Which equipment is used to supply power to several connections from one supply source ✔️Junction boxes- pg. 24
Certified mechanics perform ✔️complex maintenance- pg.30*
Which would be an appropriate option for a systematic maintenance program ✔️Contract out repair work- pg. 30
Standard operating procedures (SOPs) for a systematic maintenance program should specify maintenance procedures, when they are
performed, and ✔️Who is responsible- pg. 30
Which statement about the driver/ operator and maintenance responsibilities is MOST accurate ✔️The driver/ operator is often able to correct
minor deficiencies- pg. 30*
In which situation must immediate action be taken on apparatus maintenance and inspection issues ✔️For serious issues or items meeting the
NFPA 1911 "out of service" criteria- pg. 31*
NFPA 1002 allow D/O to perform ✔️routine test, inspection, services- pg. 30-39*
What should a D/O do when a piece of equipment onboard is found broken, defective, or in need of any type of repair ✔️Follow the established
policy of the AHJ for documenting, reporting, and following up on status of repair- pg. 31
Why should a driver/ operator use an inspection checklist ✔️Ensures the driver/ operator conducts a uniform and complete inspection- pg. 31*
1st steps when finding problem during rig checks ✔️follow order of AHJ1) document2) reporting 3) following up on status of repair- pg. 31*
Which component in a load management system will shut down less important electrical systems if an overload condition occurs ✔️Load
monitor- pg. 31
Which is a function of apparatus maintenance and inspection records ✔️In a warranty claim, may be needed to document required maintenance
was performed- pg.31
What is an adverse effect to over cleaning fire apparatus ✔️May remove lubrication from the chassis, engine, pump and underbody- pg. 32*
Which of the following statements about vehicle cleanliness is MOST accurate ✔️Proper inspection of apparatus is easier when parts are free of
dirt and grime- pg. 32*
The engine compartment where linkages, fuel injectors, or other controls are located ✔️May become inoperable due to the collection of dirt-
pg. 32
,What should be done during the 6 months after an apparatus is received ✔️Wash frequently using cold water- pg. 33*
What should be used to clean automotive glass ✔️Commercial glass cleaner in conjunction with a clean cloth rag- pg. 34
Before using any waxes or polishes on a fire apparatus ✔️reference the manufacturer's manual- pg. 35*
When cleaning the interior of an apparatus using cleaning agents ✔️Ventilate the cab or crew riding area- pg. 35
When conducting a walk around inspection, who should the D/O talk to in order to get the MOST accurate impression of how the vehicle last
operated ✔️Last person to drive apparatus- pg. 36
Walk around method starts at pg.36* ✔️driver's door then clockwise around the vehicle-
Walk around method of rig checks ✔️Operational readiness check & pre trip road worthiness- pg. 36*
Which statement about inspecting a parked apparatus is MOST accurate ✔️Whenever an apparatus is parked, chock its wheels- pg. 37*
Which statement about tire types and condition is MOST accurate ✔️All tires should be the same size and weight ratings according to
appropriate manufacturer specifications- pg. 38 **
Tire selection for fire apparatus is based on ✔️Gross axle weight ratings for the apparatus- pg. 38*
When examining tire condition ✔️cupping, cuts, dry rot and cracking- pg. 39*
According to NFPA 1911, tires must be replaced every ✔️7 years- pg. 39*
When examining tire condition, driver/ operator should check ✔️excessive wear on the sidewalls- pg. 39*
Load management ✔️Electrical system that prevents overload of electrical generation system- pg. 40*
The component in a load management system that turns on various lights at specified intervals so the startup electrical load for all devices does
not occur at the same time is called the ✔️Load sequencer- pg. 40 *
Which component in a load management system will shut down less important electrical equipment systems if an overload condition occurs
✔️Load monitor- pg. 40
The Gross vehicle weight rating (GVWR) is the ✔️maximum weight at which a vehicle can be safely operated on roadways in ideal conditions- pg.
41*
Wheel play ✔️should be no more than 10 degrees in either direction. 20" wheel=2" of play- pg.41**
In a manual transmission, excessive free play of the pedal may ✔️Result in the clutch not releasing completely- pg. 41
Apparatus with air brakes are to be equipped with an air pressure protection valve that prevents air horns or other nonessential devices from
being operated when the pressure in the air reservoir drops below ✔️80 psi- pg. 43*
On apparatus equipped with air brakes, if the engine must be run longer than the specified period of time to build sufficient air pressure ✔️The
apparatus should be inspected and repaired by a certified mechanic- pg. 43
How often should apparatus brakes be thoroughly tested ✔️Annually- pg. 43*
Which NFPA standard specifies method for the brake tests ✔️NFPA 1911- pg. 43
Abs brakes reduce possibility of ✔️sliding, jackknifing, or spin during heavy braking- pg. 43*
What is a function of antilock braking systems (ABS) ✔️Assists the D/O in keeping apparatus in a straight trajectory during heavy or emergency
braking- pg. 43
Slack adjusters ✔️device used in air brakes that compensate from brake pad wear- pg.43**
Which statement about checking fluid levels is MOST accurate ✔️Never rely solely on warning lights or gauges; all fluid levels should be
inspected- pg. 44
Engines produced after 01-01-10 may be equipped with an exhaust after treatment system called selective catalyst reductant that ✔️uses DEF
to help further reduce emissions- pg. 45
, What is the function of diesel particulate filters (DPF) ✔️Provide for cleaner emissions from diesel engines- pg. 45
Older batteries may require ✔️adding distilled water to replenish cell fluid- pg.46*
When checking vehicle batteries, D/O should check that cable connections are tight and protected with ✔️A film of grease, petroleum jelly, or
battery terminal protection product- pg. 46
Most modern truck batteries ✔️Are maintenance free- pg. 46
When performing chassis lubrication, the manufacturer's manual will recommend the ✔️Society of Automotive Engineers (SAE) numbers for
engine oil- pg. 46
What type of highly explosive gas can batteries give off ✔️Hydrogen gas- pg. 47*
Fire pumps are tested at regularly scheduled intervals to compare actual performance to ✔️Specific Standards- pg. 48
Which statement about inspections to detect deficiencies or failure of the fire pump or other fire suppression equipment is most accurate
✔️Some items should be checked daily, but other checks may be performed weekly- pg. 48*
Which of the following statements about inspecting apparatus fire pumps is MOST accurate ✔️Some items should be checked daily, but other
checks may be performed weekly- pg. 48*
When is a post trip inspection conducted ✔️After the apparatus has been operated for an extended period of time- pg. 48*
When jump starting a vehicle, the vehicle being used as the power source must have the same voltage as the app being jump started in order to
✔️prevent damage from occurring to either system- pg. 48* (not to provide enough power)
NFPA 1002 allow D/O to perform ✔️routine test, inspections, services- pg. 50-59*
Which statement about driver/ operator training is accurate ✔️All fire departments must establish and maintain a thorough training program-
pg. 80
D/O must have basic computer skills in order to ✔️access and operate on-line mapping software and dispatch instructions- pg. 81
Which skill or ability is needed to connect an intake hose to a hydrant ✔️Physical fitness- pg. 82
In the United States, basic requirements for licensing a driver are established by the ✔️Department of Transportation (DOT)- pg. 82
Which of the following statements about driving regulations is MOST accurate ✔️D/O are subject to all traffic regulations under nonemergency
conditions- pg. 83
Which statement about states/ provinces and driver/ operator regulations is MOST accurate ✔️States or provinces have latitude to alter federal
requirements as necessary- pg. 83*
D/O are subject to any statute, rule, regulation, or ordinance that governs any other vehicle operator ✔️Unless specifically exempt- pg. 83
Negligence ✔️usually found when driver operator violates standing laws/ policies- pg.84*
Which statement about the driver/ operator and organization in civil or criminal cases is MOST accurate ✔️Both the D/O and organization can
be held responsible- pg. 84
Which is the most common place for accidents to occur ✔️Intersections- pg. 85*
Which action would MOST likely be considered reckless when driving an apparatus ✔️Failing to yield to other responding emergency vehicles-
pg. 86
What generally accounts for a significant percentage of all damage repair costs for a fire department ✔️Backing accidents- pg. 86*
What must driver/ operators complete before being allowed to drive under emergency conditions ✔️A thorough training program- Pg. 87
Manufactures recommend ✔️either a completely full or completely empty water tank is safest- pg. 88*
"Home built" apparatus that are built/ designed by FD members, local mechanics and ✔️are more likely to be too heavy (GVW), of poor design
and are to top heavy- pg. 89*
