ACTUAL QUESTIONS WITH VERIFIED
ANSWERS.
What are some reasons for color aliasing? - correct answer--
high velocities
- color scale setting too low
Variance - correct answer-square of standard deviation; one of
the outputs of the autocorrelation process; a measure of
spectral broadening (i.e., spread around the mean)
Variance map - correct answer-- another color added (usually
green)
- with increase in variance, brightness of green increases
- color green signifies disturbed/turbulent flow
- used in cardiac imaging (echocardiography)
Color components - correct answer-Hue - color that eye
perceives
,Saturation - amount to which the original color is diluted with
white
Luminance - the brightness of hue and saturation of the color
Autocorrelation - correct answer-a rapid technique, used in
most color Doppler instruments for obtaining mean Doppler-
shift frequency
- similar to FFT, but faster
Time domain processing - correct answer-newer method of
Doppler shift analysis
- faster than FFT/Autocorrelation
- can pinpoint specific echo out of many
Doppler-power display (Doppler Power) - correct answer-color
Doppler display in which colors are assigned according to the
strength (amplitude, power, intensity, energy) of the Doppler-
shifted echoes
- no velocities at all
- relates to RBC concentration
,Power Doppler advantages / disadvantages - correct answer-
Advantages:
- not angle dependent
- not subject to aliasing
- greater sensitivity to flow (low velocities)
Disadvantages:
- not direction sensitive
- cannot detect velocity
- cannot detect flow characteristics
- takes more time
- flash artifact possible
Doppler spectrum - correct answer-The range of frequencies
present in Doppler shifted echoes
Duplex instrument - correct answer-An ultrasound instrument
that combines gray-scale sonography with pulsed Doppler, and
possibly continuous-wave Doppler
Continuous-wave - correct answer-A wave in which cycles
repeat indefinitely; not pulsed
Abbreviation: CW
, Baseline shift - correct answer-Movement of the zero Doppler-
shift frequency or zero flow speed line up or down on a spectral
display
Doppler angle - correct answer-The angle between the sound
beam and flow direction.
Should be between 45° and 60° for optimum accuracy of
velocities
Artifact - correct answer-anything appearing on the display that
does not represent real echo information
Reasons for artifacts - correct answer-1) physical laws of
ultrasound are broken
2) misinterpretation of image information
3) ultrasound machine's failure to perform
4) failure to operate equipment properly
5) physical nature of sound