auto service | QUESTIONS AND ANSWERS |
LATEST UPDATE | INSTANT DOWNLOAD !
Save
Practice questions for this set
Learn 1/7 Study with Learn
Dial bore gauge
Choose an answer
Technician A states that transmissions and transaxles are completely different, they
1 share nothing in common. Technician B states that if we are discussing ring and pinion
backlash, it can apply only to a transaxle. Who is correct?
2 A manual transmission in a rear-wheel-drive vehicle has all of these shafts EXCEPT a(n):
All of the following tools will be needed in rebuilding a transmission EXCEPT a(n)
3
___________.
Using the _________ helps to isolate the weight of the vehicle on the hub and bearings, not
4
on the axle itself.
, Don't know?
Terms in this set (184)
Technician A states that transmissions tech b
and transaxles are completely
different, they share nothing in
common. Technician B states that if
we are discussing ring and pinion
backlash, it can apply only to a
transaxle. Who is correct?
Rebuilding a manual transmission pinch rollers.
may require the use of all of these
EXCEPT:
As the transmission assembly all of the above.
becomes worn, it may develop
behaviors that are of concern to the
customer, such as:
A manual transmission shift boot Technician A
becomes bound up with the shift
linkage. Technician A says that the
transmission may experience
popping out of gear. Technician B
says that the transmission needs to
be removed to repair it. Who is
correct?
, Technician A states that finding Both A and B
replacement parts for a transmission
can be a large undertaking
considering all of the makes and
models produced for the automotive
market. Technician B states that
rebuilding a transmission often
requires specialty tools that are
specific to each transmission. Who is
correct?
All of these work against a vehicle's passive resistance.
forward movement EXCEPT:
Cork gaskets are cut out of a large Rubber
sheet of cork and ________ mixture.
In ______ gear, the smallest gear on the First
primary shaft drives the largest gear
on the secondary shaft, resulting in
the lowest gear ratio.
Technician A says that low gearbox Both Technician A and Technician B
fluid will cause bearings and gears to
starve for lubrication. Technician B
says that an overfilled gearbox will
cause aeration of the lube and cause
premature damage. Who is correct?
LATEST UPDATE | INSTANT DOWNLOAD !
Save
Practice questions for this set
Learn 1/7 Study with Learn
Dial bore gauge
Choose an answer
Technician A states that transmissions and transaxles are completely different, they
1 share nothing in common. Technician B states that if we are discussing ring and pinion
backlash, it can apply only to a transaxle. Who is correct?
2 A manual transmission in a rear-wheel-drive vehicle has all of these shafts EXCEPT a(n):
All of the following tools will be needed in rebuilding a transmission EXCEPT a(n)
3
___________.
Using the _________ helps to isolate the weight of the vehicle on the hub and bearings, not
4
on the axle itself.
, Don't know?
Terms in this set (184)
Technician A states that transmissions tech b
and transaxles are completely
different, they share nothing in
common. Technician B states that if
we are discussing ring and pinion
backlash, it can apply only to a
transaxle. Who is correct?
Rebuilding a manual transmission pinch rollers.
may require the use of all of these
EXCEPT:
As the transmission assembly all of the above.
becomes worn, it may develop
behaviors that are of concern to the
customer, such as:
A manual transmission shift boot Technician A
becomes bound up with the shift
linkage. Technician A says that the
transmission may experience
popping out of gear. Technician B
says that the transmission needs to
be removed to repair it. Who is
correct?
, Technician A states that finding Both A and B
replacement parts for a transmission
can be a large undertaking
considering all of the makes and
models produced for the automotive
market. Technician B states that
rebuilding a transmission often
requires specialty tools that are
specific to each transmission. Who is
correct?
All of these work against a vehicle's passive resistance.
forward movement EXCEPT:
Cork gaskets are cut out of a large Rubber
sheet of cork and ________ mixture.
In ______ gear, the smallest gear on the First
primary shaft drives the largest gear
on the secondary shaft, resulting in
the lowest gear ratio.
Technician A says that low gearbox Both Technician A and Technician B
fluid will cause bearings and gears to
starve for lubrication. Technician B
says that an overfilled gearbox will
cause aeration of the lube and cause
premature damage. Who is correct?