EPIC AMB400 - SAMPLE TEST,
KAW 2026/27 WITH VERIFIED
SOLUTIONS
Your providers would like the question "Is the patient pregnant?" to
appear when ordering an X-ray for female patients aged 12 or older. After
the order-specific question has been created, how will you accomplish this
request? (Choose only one answer.)
A. Link the question to the X-Ray Default Settings screen of System
Definitions.
B. Link the question to the "X-ray orderables" procedure category.
C. Link the question to the OCC at the procedure category level.
D. Link the question to the imaging procedure record. - ANSWER-Link the
question to the "X-ray orderables" procedure category.
Which of the following can be specified in System Definitions or in an OCC
linked to System Definitions? (Choose all that apply.)
A. Display Items
B. Default Order Class
C. Default Priority
D. Default Status
E. Item buttons for Class
F. Order-specific question for pediatric patients - ANSWER-Display Items,
Default Priority, and Item buttons for Class
An ankle x-ray procedure is linked to the procedure category "X-ray
orderables." All other procedures linked to this category have three class
buttons, while this procedure has four. All orders within the category have
the same allowed classes, so what is causing this difference? (Choose all
that apply.)
A. There are three class buttons defined in the procedure category.
B. This procedure has one defined class button.
C. There are three available classes set up in the procedure category.
D. There are four class buttons defined in the procedure record. -
ANSWER-There are three class buttons defined in the procedure category
and There are four class buttons defined in the procedure record.
Referrals at your organization have appropriate display items appear
within the order composer based off of the value selected for Class (either
"Internal Referral" or "Outgoing Referral"). To achieve this, a minimum of
three OCC records must be created and linked to the procedure category.
What are the contexts of the OCC records? (Choose only one answer.)
A. Referral-Ambulatory, Ambulatory, External Referral-Ambulatory
B. Referral-Ambulatory, Incoming Referral-Ambulatory, External-Referral-
Ambulatory
,C. Ambulatory, Ambulatory-Referral, External Referral-Ambulatory
D. Ambulatory, Internal Referral-Ambulatory, External Referral-Ambulatory
- ANSWER-Ambulatory, Internal Referral-Ambulatory, External Referral-
Ambulatory
After ordering a varicella vaccination procedure, a clinician will open the
Immunizations activity to administer the immunization and a default dose
of 0.5 mL appears. When a clinician is documenting a patient-reported
varicella vaccination using the same varicella immunization record, what
will appear for the dose? (Choose only one answer.)
A. Blank fields
B. 0.5 mL
C. The "mL" unit, but a missing numeric value
D. A stop sign, indicating the fields are required - ANSWER-Blank fields
Resources
Part I: When selecting the eye culture lab test from within the
Conjunctivitis SmartSet, its Status is Future. But, when clinicians in the
ophthalmology department order the same test from their department
preference list, the Status is Normal. Why? (Choose only one answer.)
A. Within the Labs SmartGroup, the eye culture item is listing default
values from a system preference list.
B. SmartSets will display default values from a preference list of the user
who has selected the order.
C. Within the Labs SmartGroup, the eye culture item has an override value
for status.
D. The Conjunctivitis SmartSet has overridden the default status for all
labs it - ANSWER-Within the Labs SmartGroup, the eye culture item has an
override value for status.
What BPA type would be needed to suggest an allergic rhinitis SmartSet
for any office visit scheduled in an allergy department? (Choose only one
answer.)
A. Criteria
B. SmartSet Suggestion
C. SmartSet Base
D. This is not possible - ANSWER-SmartSet Suggestion
Clinicians have requested that the Pap smear SmartGroup only be
available for female patients age 21 or older when the Adult Preventative
Interventions SmartSet is opened. How could you satisfy this request?
(Choose only one answer.)
A. Create a BPA SmartSet Base record to restrict Labs section for female
patients and suggest it for male patients. Create a BPA Criteria record to
suggest the SmartSet for patients age 21 or older.
B. Create a BPA Criteria record to evaluate patients age 21 or older, link it
to a BPA SmartSet Base record which includes patient gender of female,
and link the SmartSet Base record to the Pap smear SmartGroup.
,C. Create a BPA SmartSet Suggestion record to evaluate patient age 21 or
older, link it to a BPA Criteria record which includes patient gender of
female, and link the Criteria record to the SmartSet.
D. Create a BPA SmartSet Base record to evaluate patients age 21 or
older, link it to - ANSWER-Create a BPA Criteria record to evaluate patients
age 21 or older, link it to a BPA SmartSet Base record which includes
patient gender of female, and link the SmartSet Base record to the Pap
smear SmartGroup.
Clinicians currently use a Hepatic Function order panel that contains
several labs. They would like this panel to be suggested when a reason for
visit of jaundice, abdominal pain, or vomiting is entered. They would also
like to restrict the AST, ALT, or Albumin labs if the patient has already had
these lab values entered within the last 2 months. How can you efficiently
accomplish this request? (Choose all answers that apply.)
A. Create a section for the AST, ALT, and Albumin lab orders within the
orderable SmartGroup.
B. Create a BPA criteria record that is evaluating the reasons for visit and
link it to the orderable SmartGroup.
C. Create a BPA criteria record that is evaluating historical labs for AST,
ALT, or Albumin recorded within the last 2 months.
D. Create a BPA SmartSet base record and link it to the BPA criteria record
evaluating the historical labs.
E. Link the BPA SmartSet base record to the section cont - ANSWER-This
request is not possible in an orderable SmartGroup.
After assigning a therapy plan to a patient, a clinician can edit the
following: (Choose all answers that apply.)
A. The therapy plan's type
B. An order's interval
C. An order's display name
D. An order's duration - ANSWER-An order's interval and An order's
duration
When creating a therapy protocol, an administrator can edit the following:
(Choose all answers that apply.)
A. Review scheme
B. An order's frequency
C. The protocol type
D. Category names - ANSWER-Review scheme, An order's frequency, and
The protocol type
True or False: An administrator adds a hematocrit lab to an existing
preference list. When adding the lab, the administrator intentionally
leaves all of the items within the order composer blank. This ensures that
when a user orders the hematocrit lab from this preference list, the
default values will be overridden with blank fields. - ANSWER-False
, True or False: Preference lists created in the Preference List Editor cannot
override a record's details. - ANSWER-True
When your providers choose "Yes" for Exacerbation (labeled B), they
expect to see additional choices cascade. Currently, nothing happens
when they choose "Yes". What could be the issue? (Choose all that apply.)
A. The Cascade method is set to "Prompt Users" on the Cascading
Flowsheet form.
B. There are no groups/rows listed on the Cascading Flowsheet form.
C. The Symptoms Group is configured incorrectly.
D. The wrong Comparison Value is listed on the Cascading Flowsheets
form. - ANSWER-There are no groups/rows listed on the Cascading
Flowsheet form and The wrong Comparison Value is listed on the
Cascading Flowsheets form.
An administrator is building a flowsheet template and would like one of
the groups to appear only after a clinician chooses "Yes" from the
preceding row. To have the group not appear initials when the clinician
opens the flowsheet, what configuration is required? (Choose all answers
that apply.)
A. Do not release that group.
B. In the template, select the Start Removed check box for that group.
C. In the template, do not list that group and select the Restrict Rows
check box.
D. There is not a way to prevent a group from appearing immediately. -
ANSWER-In the template, select the Start Removed check box for that
group.
Your clinicians have asked you to change the "Kidney" button (Synopsis
Tab) to "CKD" (standing for Chronic Kidney Disease). How can you
efficiently accomplish this request? (Choose all that apply.)
A. Open the Kidney Synopsis View record and change the button display
to CKD.
B. Click the wrench icon within the Synopsis activity and change the
button display to CKD.
C. Open the profile record which contains the Kidney Synopsis View that is
impacting this workspace and enter CKD in the View Title Override
column.
D. Open the department record of the users and on the Outpatient
Synopsis screen update the Display View Title to CKD. - ANSWER-Open the
Kidney Synopsis View record and change the button display to CKD and
Open the profile record which contains the Kidney Synopsis View that is
impacting this workspace and enter CKD in the View Title Override
column.
The Infections & Rejections Synopsis flowsheet row contains no data. To
save space, how could you configure this row to only appear if data
exists? (Choose only one answer.)
KAW 2026/27 WITH VERIFIED
SOLUTIONS
Your providers would like the question "Is the patient pregnant?" to
appear when ordering an X-ray for female patients aged 12 or older. After
the order-specific question has been created, how will you accomplish this
request? (Choose only one answer.)
A. Link the question to the X-Ray Default Settings screen of System
Definitions.
B. Link the question to the "X-ray orderables" procedure category.
C. Link the question to the OCC at the procedure category level.
D. Link the question to the imaging procedure record. - ANSWER-Link the
question to the "X-ray orderables" procedure category.
Which of the following can be specified in System Definitions or in an OCC
linked to System Definitions? (Choose all that apply.)
A. Display Items
B. Default Order Class
C. Default Priority
D. Default Status
E. Item buttons for Class
F. Order-specific question for pediatric patients - ANSWER-Display Items,
Default Priority, and Item buttons for Class
An ankle x-ray procedure is linked to the procedure category "X-ray
orderables." All other procedures linked to this category have three class
buttons, while this procedure has four. All orders within the category have
the same allowed classes, so what is causing this difference? (Choose all
that apply.)
A. There are three class buttons defined in the procedure category.
B. This procedure has one defined class button.
C. There are three available classes set up in the procedure category.
D. There are four class buttons defined in the procedure record. -
ANSWER-There are three class buttons defined in the procedure category
and There are four class buttons defined in the procedure record.
Referrals at your organization have appropriate display items appear
within the order composer based off of the value selected for Class (either
"Internal Referral" or "Outgoing Referral"). To achieve this, a minimum of
three OCC records must be created and linked to the procedure category.
What are the contexts of the OCC records? (Choose only one answer.)
A. Referral-Ambulatory, Ambulatory, External Referral-Ambulatory
B. Referral-Ambulatory, Incoming Referral-Ambulatory, External-Referral-
Ambulatory
,C. Ambulatory, Ambulatory-Referral, External Referral-Ambulatory
D. Ambulatory, Internal Referral-Ambulatory, External Referral-Ambulatory
- ANSWER-Ambulatory, Internal Referral-Ambulatory, External Referral-
Ambulatory
After ordering a varicella vaccination procedure, a clinician will open the
Immunizations activity to administer the immunization and a default dose
of 0.5 mL appears. When a clinician is documenting a patient-reported
varicella vaccination using the same varicella immunization record, what
will appear for the dose? (Choose only one answer.)
A. Blank fields
B. 0.5 mL
C. The "mL" unit, but a missing numeric value
D. A stop sign, indicating the fields are required - ANSWER-Blank fields
Resources
Part I: When selecting the eye culture lab test from within the
Conjunctivitis SmartSet, its Status is Future. But, when clinicians in the
ophthalmology department order the same test from their department
preference list, the Status is Normal. Why? (Choose only one answer.)
A. Within the Labs SmartGroup, the eye culture item is listing default
values from a system preference list.
B. SmartSets will display default values from a preference list of the user
who has selected the order.
C. Within the Labs SmartGroup, the eye culture item has an override value
for status.
D. The Conjunctivitis SmartSet has overridden the default status for all
labs it - ANSWER-Within the Labs SmartGroup, the eye culture item has an
override value for status.
What BPA type would be needed to suggest an allergic rhinitis SmartSet
for any office visit scheduled in an allergy department? (Choose only one
answer.)
A. Criteria
B. SmartSet Suggestion
C. SmartSet Base
D. This is not possible - ANSWER-SmartSet Suggestion
Clinicians have requested that the Pap smear SmartGroup only be
available for female patients age 21 or older when the Adult Preventative
Interventions SmartSet is opened. How could you satisfy this request?
(Choose only one answer.)
A. Create a BPA SmartSet Base record to restrict Labs section for female
patients and suggest it for male patients. Create a BPA Criteria record to
suggest the SmartSet for patients age 21 or older.
B. Create a BPA Criteria record to evaluate patients age 21 or older, link it
to a BPA SmartSet Base record which includes patient gender of female,
and link the SmartSet Base record to the Pap smear SmartGroup.
,C. Create a BPA SmartSet Suggestion record to evaluate patient age 21 or
older, link it to a BPA Criteria record which includes patient gender of
female, and link the Criteria record to the SmartSet.
D. Create a BPA SmartSet Base record to evaluate patients age 21 or
older, link it to - ANSWER-Create a BPA Criteria record to evaluate patients
age 21 or older, link it to a BPA SmartSet Base record which includes
patient gender of female, and link the SmartSet Base record to the Pap
smear SmartGroup.
Clinicians currently use a Hepatic Function order panel that contains
several labs. They would like this panel to be suggested when a reason for
visit of jaundice, abdominal pain, or vomiting is entered. They would also
like to restrict the AST, ALT, or Albumin labs if the patient has already had
these lab values entered within the last 2 months. How can you efficiently
accomplish this request? (Choose all answers that apply.)
A. Create a section for the AST, ALT, and Albumin lab orders within the
orderable SmartGroup.
B. Create a BPA criteria record that is evaluating the reasons for visit and
link it to the orderable SmartGroup.
C. Create a BPA criteria record that is evaluating historical labs for AST,
ALT, or Albumin recorded within the last 2 months.
D. Create a BPA SmartSet base record and link it to the BPA criteria record
evaluating the historical labs.
E. Link the BPA SmartSet base record to the section cont - ANSWER-This
request is not possible in an orderable SmartGroup.
After assigning a therapy plan to a patient, a clinician can edit the
following: (Choose all answers that apply.)
A. The therapy plan's type
B. An order's interval
C. An order's display name
D. An order's duration - ANSWER-An order's interval and An order's
duration
When creating a therapy protocol, an administrator can edit the following:
(Choose all answers that apply.)
A. Review scheme
B. An order's frequency
C. The protocol type
D. Category names - ANSWER-Review scheme, An order's frequency, and
The protocol type
True or False: An administrator adds a hematocrit lab to an existing
preference list. When adding the lab, the administrator intentionally
leaves all of the items within the order composer blank. This ensures that
when a user orders the hematocrit lab from this preference list, the
default values will be overridden with blank fields. - ANSWER-False
, True or False: Preference lists created in the Preference List Editor cannot
override a record's details. - ANSWER-True
When your providers choose "Yes" for Exacerbation (labeled B), they
expect to see additional choices cascade. Currently, nothing happens
when they choose "Yes". What could be the issue? (Choose all that apply.)
A. The Cascade method is set to "Prompt Users" on the Cascading
Flowsheet form.
B. There are no groups/rows listed on the Cascading Flowsheet form.
C. The Symptoms Group is configured incorrectly.
D. The wrong Comparison Value is listed on the Cascading Flowsheets
form. - ANSWER-There are no groups/rows listed on the Cascading
Flowsheet form and The wrong Comparison Value is listed on the
Cascading Flowsheets form.
An administrator is building a flowsheet template and would like one of
the groups to appear only after a clinician chooses "Yes" from the
preceding row. To have the group not appear initials when the clinician
opens the flowsheet, what configuration is required? (Choose all answers
that apply.)
A. Do not release that group.
B. In the template, select the Start Removed check box for that group.
C. In the template, do not list that group and select the Restrict Rows
check box.
D. There is not a way to prevent a group from appearing immediately. -
ANSWER-In the template, select the Start Removed check box for that
group.
Your clinicians have asked you to change the "Kidney" button (Synopsis
Tab) to "CKD" (standing for Chronic Kidney Disease). How can you
efficiently accomplish this request? (Choose all that apply.)
A. Open the Kidney Synopsis View record and change the button display
to CKD.
B. Click the wrench icon within the Synopsis activity and change the
button display to CKD.
C. Open the profile record which contains the Kidney Synopsis View that is
impacting this workspace and enter CKD in the View Title Override
column.
D. Open the department record of the users and on the Outpatient
Synopsis screen update the Display View Title to CKD. - ANSWER-Open the
Kidney Synopsis View record and change the button display to CKD and
Open the profile record which contains the Kidney Synopsis View that is
impacting this workspace and enter CKD in the View Title Override
column.
The Infections & Rejections Synopsis flowsheet row contains no data. To
save space, how could you configure this row to only appear if data
exists? (Choose only one answer.)
