AVIXA CTS Sample Questions and Answers |
Verified Solutions | 2026 Edition | Pass
Guaranteed
Save
Terms in this set (122)
What is the BEST way to determine Use an RT60 meter
how reverberant a space is?
-Clap your hands and listen for an
echo
-Ask the client if anyone has
complained that the room is too
noisy
-Use an RT60 meter
-Use a DB SPL meter
The correct time to discuss visible Site survey
finishes for wall plates, surface
mount speakers, and wall mounted
screen casings is during the:
-Ordering
-Installation
-Site survey
-Contract award
,While surveying a conference room Speak with the client about getting more
for a system upgrade, an engineer information on how to address the noise source
measures 55 dB SPL A-wtd of
ambient noise when the room is
empty. How should they proceed? -
Add voice lift to the system proposal
-Add more loudspeakers to the
system proposal
-Speak with the client about getting
more information on how to address
the noise source
-Do nothing, this level of ambient
noise is well within system tolerance
A client needs to add Divisible room
videoconferencing functionality for
high-level, private meetings. Which
of following planned space types
should you advise be ruled out?
-Divisible room
-Boardroom
-Conference room -Classroom
Which phase of an AV project comes The Design Phase
immediately AFTER the Program
Phase? -The Design Phase
-Project Planning and Coordination
Phase
-The Verification Phase
-The Documentation Phase
Which is NOT presented in the Detailed list of equipment
program report: -Executive Summary
-Detailed list of equipment -Budgets
-Infrastructure Considerations
,When preparing an executive An overview of the programming process including
summary what should be included who was surveyed during the process.
for submittal to the client?
-A deep dive, including full technical
specficiation, of all equipment to be
used in the design.
-An estimation of how many change
orders might be required if the client
doesn't use your design.
-References to new and emerging
technologies that should be
considered for future spaces.
-An overview of the programming
process including who was surveyed
during the process.
Which system is used to show colors Additive color system
from a video display?
-Additive color system -Subtractive
color system -Plus/minus color
system -Recover color system
An installed audio system should be 25 db
AT LEAST __________ above the ambient
noise floor.
-5 dB
-25 dB
-45 dB
-75 dB
, A device is controlled using the RS-232
pictured cable. What is the MOST
LIKELY method of controlling this
device?
-IR
-RF
-RS-232
-Network
The minimum load safety rating for 5:1
mounting audio visual equipment is:
-3:1
-5:1
-8:1
-10:1
As part of regular system On Friday afternoons.
maintenance, when is the BEST time
to update device firmware?
-On Friday afternoons.
-As soon as updates are available.
-Device firmware should never be
updated after system sign-off.
-After coordination with the client,
and when the system will be
available for an extended period of
time
The brightness controls on a display Black Level
adjusts which level?
-Black Level
-Chroma Level
-Hue
-White Level
Verified Solutions | 2026 Edition | Pass
Guaranteed
Save
Terms in this set (122)
What is the BEST way to determine Use an RT60 meter
how reverberant a space is?
-Clap your hands and listen for an
echo
-Ask the client if anyone has
complained that the room is too
noisy
-Use an RT60 meter
-Use a DB SPL meter
The correct time to discuss visible Site survey
finishes for wall plates, surface
mount speakers, and wall mounted
screen casings is during the:
-Ordering
-Installation
-Site survey
-Contract award
,While surveying a conference room Speak with the client about getting more
for a system upgrade, an engineer information on how to address the noise source
measures 55 dB SPL A-wtd of
ambient noise when the room is
empty. How should they proceed? -
Add voice lift to the system proposal
-Add more loudspeakers to the
system proposal
-Speak with the client about getting
more information on how to address
the noise source
-Do nothing, this level of ambient
noise is well within system tolerance
A client needs to add Divisible room
videoconferencing functionality for
high-level, private meetings. Which
of following planned space types
should you advise be ruled out?
-Divisible room
-Boardroom
-Conference room -Classroom
Which phase of an AV project comes The Design Phase
immediately AFTER the Program
Phase? -The Design Phase
-Project Planning and Coordination
Phase
-The Verification Phase
-The Documentation Phase
Which is NOT presented in the Detailed list of equipment
program report: -Executive Summary
-Detailed list of equipment -Budgets
-Infrastructure Considerations
,When preparing an executive An overview of the programming process including
summary what should be included who was surveyed during the process.
for submittal to the client?
-A deep dive, including full technical
specficiation, of all equipment to be
used in the design.
-An estimation of how many change
orders might be required if the client
doesn't use your design.
-References to new and emerging
technologies that should be
considered for future spaces.
-An overview of the programming
process including who was surveyed
during the process.
Which system is used to show colors Additive color system
from a video display?
-Additive color system -Subtractive
color system -Plus/minus color
system -Recover color system
An installed audio system should be 25 db
AT LEAST __________ above the ambient
noise floor.
-5 dB
-25 dB
-45 dB
-75 dB
, A device is controlled using the RS-232
pictured cable. What is the MOST
LIKELY method of controlling this
device?
-IR
-RF
-RS-232
-Network
The minimum load safety rating for 5:1
mounting audio visual equipment is:
-3:1
-5:1
-8:1
-10:1
As part of regular system On Friday afternoons.
maintenance, when is the BEST time
to update device firmware?
-On Friday afternoons.
-As soon as updates are available.
-Device firmware should never be
updated after system sign-off.
-After coordination with the client,
and when the system will be
available for an extended period of
time
The brightness controls on a display Black Level
adjusts which level?
-Black Level
-Chroma Level
-Hue
-White Level
