RCO Final Questions and Correct Detailed
Answers (Verified Answers) 2026/27 | Graded A+
Save
Terms in this set (107)
what brake application will occur if emergency brake application
the OCU is tilted and allowed to
time out?
when the secondary operator both operators but secondary must recover first
places the OCU into emergency,
who must perform the recovery
procedure?
when are remote control when the remote control operator controlling the
movements NOT considered movement is riding the leading locomotive in the
shoving movements? direction of movement
, list the steps for recovering an 1. place the speed selector to stop
emergency brake application: 2. move independent brake override to
emergency
3. move independent brake override to release
SMR
what speed must not be exceeded 4 mph until the crossing has been occupied
when using cameras to protect a
road crossing? when may speed be
resumed?
list the steps for recovering full 1. move speed selector to stop
service brake application: 2. move the independent brake override selector
to full
3. move the independent brake override selector
to release
SMR
what is the first OCU feature the the tilt feature
operator tests when initially setting
up a unit for remote operation?
what could cause a clicking sound tilting the OCU greater than 45 degrees
followed by a steady tone alarm?
which OCU component will allow the independent brake override
the RCO to send an emergency
stop command to the RCL?
The RCO begins hearing a steady press a vigilance button
clicking sound from the OCU after
remaining in 7mph for 50 seconds.
How should the RCO respond?
Answers (Verified Answers) 2026/27 | Graded A+
Save
Terms in this set (107)
what brake application will occur if emergency brake application
the OCU is tilted and allowed to
time out?
when the secondary operator both operators but secondary must recover first
places the OCU into emergency,
who must perform the recovery
procedure?
when are remote control when the remote control operator controlling the
movements NOT considered movement is riding the leading locomotive in the
shoving movements? direction of movement
, list the steps for recovering an 1. place the speed selector to stop
emergency brake application: 2. move independent brake override to
emergency
3. move independent brake override to release
SMR
what speed must not be exceeded 4 mph until the crossing has been occupied
when using cameras to protect a
road crossing? when may speed be
resumed?
list the steps for recovering full 1. move speed selector to stop
service brake application: 2. move the independent brake override selector
to full
3. move the independent brake override selector
to release
SMR
what is the first OCU feature the the tilt feature
operator tests when initially setting
up a unit for remote operation?
what could cause a clicking sound tilting the OCU greater than 45 degrees
followed by a steady tone alarm?
which OCU component will allow the independent brake override
the RCO to send an emergency
stop command to the RCL?
The RCO begins hearing a steady press a vigilance button
clicking sound from the OCU after
remaining in 7mph for 50 seconds.
How should the RCO respond?
