Texas Boiler Inspector Certification Practice Exam Questions and Correct Answers (Verified) Graded A+ | Latest Update 2026/2027 | Guaranteed Pass!!

Texas Boiler Inspector Certification Practice Exam Questions and Correct Answers (Verified) Graded A+ | Latest Update 2026/2027 | Guaranteed Pass!! 1. What is the primary purpose of a boiler inspection? A. Improve fuel efficiency B. Assess operator performance C. Ensure the safe operation of the boiler D. Reduce water usage The main goal of inspection is to prevent hazardous conditions and ensure the boiler operates safely. 2. According to Texas regulations, how often must high-pressure boilers be inspected internally? A. Every 6 months B. Annually C. Every 2 years D. Every 3 years High-pressure steam boilers require internal inspections at least once per year. 3. What document establishes the rules for the construction of new boilers? A. ASME Section II B. NFPA 85 C. ASME Boiler and Pressure Vessel Code Section I D. API 510 ASME Section I outlines construction requirements for power boilers. 5. Which of the following is not a type of non-destructive examination (NDE)? A. Radiographic testing B. Magnetic particle testing C. Ultrasonic testing D. Destructive bend testing Destructive tests are not NDE since they damage the component being tested. 6. What should be checked before performing a hydrostatic test? A. Fuel line pressure B. Exhaust damper position C. Temperature and pressure relief valve operation D. Flame scanner alignment All relief valves must be verified to avoid overpressurizing during the test. 7. What does the acronym “NB” stamp indicate? A. Non-boiler use B. National Board certification C. National Bonding D. Nuclear Boiler code The “NB” stamp is applied to pressure vessels registered with the National Board. 8. What must an inspector do when they find a hazardous condition on a boiler? A. Note it in the inspection report only B. Inform the operator to monitor it C. Condemn or tag out the boiler D. Wait until the next inspection Boilers with dangerous conditions must be removed from service immediately. 9. Which device prevents overpressure in a boiler? A. Water level gauge B. Blowdown valve C. Safety valve D. Economizer Safety valves release steam to maintain pressure within safe limits. 4. What type of test is typically conducted to verify the integrity of a repaired pressure boundary? A. Ultrasonic Test B. Radiographic Test C. Hydrostatic Test D. Magnetic Particle Test Hydrostatic tests are standard for pressure boundary integrity verification after repairs. 10. What is the minimum size of a safety valve discharge outlet for a 200 psi power boiler? A. 1 inch B. 2.5 inches C. 3 inches D. 4 inches Discharge sizes are regulated based on pressure and capacity per ASME standards. Thank you for Purchasing this exam Study Guide. We provide high-quality academic materials to help students excel in exams. Our other Services include but not limited to: academic research, University & College assignments writing, essay writing, Online Classes, and research projects. Our services are reliable, affordable, and plagiarism-free. All the Best in your Exam. For more information; Contact us at: or 0R +254 11. What is the Texas Administrative Code title that governs boiler regulations? A. Title 16, Part 2 B. Title 16, Part 4 C. Title 13, Part 6 D. Title 20, Part 5 Boiler inspection and regulation are covered under Title 16, Part 4.