API 653 Recertification Quiz EXAM|| MOST RECENT
EXAM 2026-2027 ACTUAL COMPLETE REAL EXAM
QUESTIONS AND CORRECT ANSWERS (VERIFIED
ANSWERS) ALREADY GRADED A+ | GUARANTEED
SUCCESS!! NEWEST EXAM | JUST RELEASED!!
The likelihood of caustic stress corrosion cracking can
be reduce by: -
ANSWER-Stress
relieving
Scribe the flexible joint across the two moving faces and raise
end of swing line
to check? - ANSWER-Joints freedom of
movement
Minimum size of bottom lap-patch that does not cross a
bottom seam? -
ANSWER-
6"
The requirements of which standard shall be considered in the
evaluation and
alteration to the tank roof and roof-to-shell junction ? -
ANSWER-Current
, applicable
standard
Welding procedure for ladder and platform assemblies, but not
their attachment
to the tank? - ANSWER-Shall comply with either AWS D1.1,
AWS D1.6 or
ASME Code
Section IX.
In floating roof tanks, shell nozzles without internal piping within
operating range
of the floating roof shall be supplied? - ANSWER-Flush on
the inside of the
tank.
The attachment welds of new lap-welded shell patch plates
shall be examined
by: - ANSWER-Visually and by either
MP or PT
What is the minimum external projection outside the shell for
bottom plates in a
new tank? - ANSWER-2
inches
Subject to the purchaser's approval, where normalized plates
are required? - ANSWER-Thermo mechanical control process
(TMCP) plates may be used.
EXAM 2026-2027 ACTUAL COMPLETE REAL EXAM
QUESTIONS AND CORRECT ANSWERS (VERIFIED
ANSWERS) ALREADY GRADED A+ | GUARANTEED
SUCCESS!! NEWEST EXAM | JUST RELEASED!!
The likelihood of caustic stress corrosion cracking can
be reduce by: -
ANSWER-Stress
relieving
Scribe the flexible joint across the two moving faces and raise
end of swing line
to check? - ANSWER-Joints freedom of
movement
Minimum size of bottom lap-patch that does not cross a
bottom seam? -
ANSWER-
6"
The requirements of which standard shall be considered in the
evaluation and
alteration to the tank roof and roof-to-shell junction ? -
ANSWER-Current
, applicable
standard
Welding procedure for ladder and platform assemblies, but not
their attachment
to the tank? - ANSWER-Shall comply with either AWS D1.1,
AWS D1.6 or
ASME Code
Section IX.
In floating roof tanks, shell nozzles without internal piping within
operating range
of the floating roof shall be supplied? - ANSWER-Flush on
the inside of the
tank.
The attachment welds of new lap-welded shell patch plates
shall be examined
by: - ANSWER-Visually and by either
MP or PT
What is the minimum external projection outside the shell for
bottom plates in a
new tank? - ANSWER-2
inches
Subject to the purchaser's approval, where normalized plates
are required? - ANSWER-Thermo mechanical control process
(TMCP) plates may be used.
